迈向21世纪的建筑艺术观

自现代主义建筑艺术创作理论之后，建筑创作表现出一直被怀疑为某种程度的哗众取宏。在这些繁杂的理论争论中，我们面临着如何迈向21世纪新历程的挑战？如何面对电脑、信息和新技术的冲击，避免建筑创作中人的主创作用的消蚀，是建筑创作迈向21世纪的重要课题。本篇文章主要从建筑艺术哲学角度，分析了当今建筑创作的现状和特征，提出没有任何规范约束的个性创作自由，将使21世纪建筑创作思维充满活力与生机。     

催化裂化装置反应再生系统优化改造

重点介绍了呼和浩特石油化工公司重油催化裂化装置反应再生系统优化改造的目的、内容及运用的新技术;着重从物料平衡、原料及产品性质、催化剂性质、装置能耗、操作参数等方面与改造前进行了对比。装置改造后,在原料明显变重,催化剂单耗明显降低的情况下,生焦率下降了0.13个百分点,轻质油收率提高了3.54个百分点;汽油诱导期较改造前延长了140min,烯烃体积分数降低了1.9个百分点;柴油十六烷值比改造前提高了4个单位;装置能耗较改造前下降了906MJ/t,年创经济效益1030.9×10~4RMB￥。     

集约、专业乃上策——向小型玻纤企业献计献策

我国玻纤行业经过40多年的发展、壮大,目前已遍及大江南北的广大城乡,但其中为数众多的是乡镇企业,俗称"小玻纤".这些小玻纤生产规模都很小,较大的年产量也只有数百吨,一般的年产量只有数十吨,还有家庭作坊式生产的年产量竟低至十多吨.正因为其生产规模小,所以其基建投资资金也相应较少,上马较快,在前几年玻纤畅销时期,小玻纤如雨后春笋似的蓬勃发展.目前,全国小玻纤已经发展到将近500家之多.     

宽带接入服务器的选择配置和应用

本文主要分析了影响宽带接入服务器性能的各种因素，介绍了如何选择宽带接入服务器，并针对REDBACK公司的SMS1800和UNISPHERE公司的ERX1400两种典型宽带接入服务器说明如何进行配置，为应用宽带接入服务器提供参考。     

用保护共沉淀法制备纳米ZrO2(Y2O3)粉体

用Tween-80保护共沉淀法制备了ZrO2(Y2O3）纳米粉体，用差热分析，热重分析，X射线衍射及透射电子显微镜等技术研究所了粉体的特征，结果表明：在700℃燃烧0.5h后ZrO2(Y2O3)粉体的平均粒径为3－9nm，比表面为128.5-134.5m^3g^-1,在1250℃煅烧8h后ZrO2(Y2O3)粉体已完全形成了立方相的ZrO2L大溶体，并且有非常好的烧结性能。     

Fuel management of the HTR-10 including the equilibrium state and the running-in phase

The mode of fuel management of the HTR-10 was studied, including the simulation of the fuel shuffling process and the measurement of the burnup of a fuel element. The prior consideration was the design of the equilibrium state. Based on this the fuel loading of the initial core and the fuel shuffling mode from the initial core through the running-in phase into the equilibrium state were studied. The code system VSOP was used for the physical layout of the HTR-10 at the equilibrium state and in the running-in phase. For the equilibrium state, in order to lessen the difference between the peak and the average burnup, 5-fuel-passage-through-the-core was chosen for the fuel management. The average burnup of the spent fuel for the equilibrium core is 80 000 MWd t⁻¹, and the peak value of it is less than 100 000 MWd t⁻¹ when the burnup of the recycled fuel element is under 72 000 MWd t⁻¹. The mixture of fuel element and graphite element was used for the initial core loading, the volume fractions of the fuel and the graphite elements were 0.57 and 0.43, respectively. During the running-in phase, the volume fraction of graphite will decrease with the fresh fuel elements being loaded from the top of the core and the graphite elements discharged from the bottom of the core. The fuel shuffling mode is similar to that of the equilibrium state. The burnup limit of recycled fuel element is also 72 000 MWd t⁻¹ and the peak burnup is less than 100 000 MWd t⁻¹. Finally the core will be full of fuel elements with a certain profile of burnup and reaches the equilibrium state. According to the characteristics of the pebble-bed high temperature gas-cooled reactor, a calibrating method of concentration of ¹³⁷Cs was proposed for the measurement of fuel burnup.     

近非临界相位匹配温度调谐MgO：LiNbO3OPO

通过对MgO:LiNbO3参量过程温度相位匹配及走离角，允许参量等运转参数的理论计算与分析，确定了晶体的切割角度θ=82℃，以近非临界相位匹配（NCPM）取代NCPM，将温度调节范围控制在较低的温度上，研制了532nm泵浦的MgO:LiNbO3温度调谐脉冲光学参数振荡器（OPO），在800～1700nm波段实现连续调谐输出。参量泵浦功率密度阈值为57.3MW/cm^2，泵浦能量约2倍阈值处，单谐振（SRO）参量转换效率为11%以上。     

横流均匀环境中三维线源型正负浮力射流特性研究

本文利用混合有限分析法及交错网格。对横流均匀环境中三维线源型正负浮力射流及负浮力射流的特性进行研究，分析了不同工况下流速，温度和湍动能在断面上的分布及影响射流轨迹线的因素，讨论了轨迹线上温度的变化及浮力射流的贴壁现象。对三维长线源型负浮力射流，分析了流速比，喷口弗汝德数对负浮力射流的影响。     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

Economic analysis and optimization of tool portfolio in semiconductor manufacturing

The tool portfolio of a plant refers to the makeup, in quantity and type, of processing machines in the plant. It is determined by taking into consideration the future trends of process and machine technologies and the forecasts of product evolution and product demands. Portfolio planning is also a multicriteria decision-making task involving tradeoffs among, investment cost, throughput, cycle time, and risk. Tool portfolio planning is a complex task that has strong bearing on manufacturing efficiency. In the first part of this paper, a multicriteria economic decision model is presented for optimal configuration. of the portfolio and to determine the optimal factory loading. The second and third parts of the paper contain applications of the model. If plants are closely located or have a twin-plant design, portfolio planning at multiple plants can be integrated to enhance the overall effectiveness of portfolios. In the second part, a novel methodology for arbitrating capacity backup between plants is described. Because the economic model is constructed upon a valuation of both cycle time and throughput, it is a suitable method for the evaluation of cycle time reduction projects. The application procedure is outlined in the third part.