管壳式换热器流场三维数值模拟

采用多孔介质方法 ,在PHOENICS 3 3程序的基础上建立了换热器的三维流动计算模型。引入体积穿透率、表面穿透率、分布阻力等来描述换热器内的管束。模型通过计算Halle等[1] 的实验工况来进行验证 ,并尝试用于计算 2 0 0MW低温供热堆主换热器内的流场     

Teachers' and deaf students' perceptions of communication ease and engagement.

Collected ratings of communication ease and of engagement for 95 deaf junior and senior high school students (aged 12–21 yrs) in a large, urban, multiethnic school for the deaf. Ratings were made by the students' English teachers and by the students themselves. High teacher ratings for communication ease and engagement were associated with high academic achievement as measured by the Stanford Achievement Test. High student ratings for communication ease were also associated with academic achievement. The 2 best predictors of academic achievement were student-rated communication ease and teacher-rated engagement. Findings suggest that it is important for teachers to be sensitive to the level of communication comfort of their students because students who enjoy easier communication may be more likely to be engaged, or more actively involved, in classroom learning and to demonstrate higher academic achievement. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

储层识别模式的研究

用数学方法建立气测井油气储层识别模式,以解决录井中实时软件在判别依据少的条件下,及时识别油气显示假异常的难题。该判别式经实用,正到率达90％。     

双迭片弯曲压电陶瓷换能器及振动模态分析测量

介绍了双迭片弯曲压电陶瓷换能器的制作及边缘固定金属压电陶瓷双迭片弯曲振动，并利用有限元分析了换能器的谐振模式，采用激光多普勒干涉仪对换能器的谐振特性以及振动速度和位移分布进行了测量和分析，结果表明：换能器空载性能良好，通过有限元分析与先进测量手段的结合，能够对换能器器件的制作与分析进行指导。     

济钢中板厂加快技术创新的对策

本文通过对中板厂近年来技术改造后工艺装置和技术水平的分析，并结合中国加入WTO后对中国钢铁企业面临全球化市场竞争严峻性的认识，提出了中板厂在实现高产生产模式后，应加快技术创新的步伐，尽快完成由高产向优质、多品种、低消耗的高效化生产模式转化的主导思想、措施及建议。     

尾矿堆场对地下水及其水质影响的联合模拟研究

矿产资源开发利用后的废弃物堆场常处水文地质条件复杂、区域内外边界不规整的地带。为了客观评价堆场渗漏对地下水及其水质的影响,本文提出了适宜于复杂水文地质条件、复杂内外边界条件的地下水与地下水中污染物分布规律联合模拟分析的非构造网格FVM数值模型,通过在某化工行业尾矿堆场渗漏评价的具体应用,取得了很满意的结果。     

An experimental investigation of electrically thick rectangular microstrip antennas

The electromagnetic properties of electrically thick rectangular microstrip antennas were investigated experimentally. Antennas were fabricated with different patch sizes and with electrical thicknesses ranging from 0.03 to 0.23 wavelengths in the dielectric substrate. The resonant frequencies were measured and compared to existing formulas. The bandwidth was calculated as a function of electrical thickness and the antenna radiation patterns were measured.     

Office Chart11组件在C#．NET数据库开发中的应用

本文介绍了MOC组件的安装与使用，并给出了C#．NET for Windows数据库项目开发中应用MOC组件编程的一个实例。     

B2O3/TiO2-ZrO2催化剂上环己酮肟的气相Beckmann重排反应

用共沉淀法制备了TiO2-ZrO2复合氧化物载体，BET，DTA，XRD表征结果表明，该复合载体具有较大的比表面和较好的热稳定性，对于环己酮肟气相Beckmann重排反应制己内酰胺，用复合载体制备的B2O3／TiO2-ZrO2催化剂，比分别以TiO2,ZrO2为载体所制备的B2O3/TiO2和B2O3／ZrO2催化剂具有更高的活性和选择性，实验表明，催化剂表面中等强度的酸位是环己酮肟气相Beckmann重排反应的有效活性中心。     

同步辐射x射线光刻制作深亚微米T形栅

x射线光刻非常适合用于深亚微米T形栅的制作,这是因为它的高分辨率、大的曝光视场和高的生产效率足以满足MMIC制造工艺的要求。本文中我们首先对我们的x射线掩模制造工艺进行介绍,然后论述了一种用于制造深亚微米T形栅的两层胶工艺,介绍了所取得的一些研究结果,最后对国内的深亚微米光刻现状进行了简要分析。