蒸汽喷射器射流场流动模型研究综述

综述了3种不同维数的喷射器射流场流动模型的研究工作,分析了3种模型各自的特点后指出,一维模型的建立主要基于定压混合理论或定常面积混合理论;二维偏微分方程模型建立后基于差分法等数值算法进行求解.随着网格技术和计算方法的提高,三维粘性射流场中激波和湍流的数值模拟发展迅速.     

Lactic acid production from dining‐hall food waste by Lactobacillus plantarum using response surface methodology

BACKGROUND: Food waste generally has a high starch content and is rich in nutritional compounds, including lipids and proteins. It therefore represents a potential renewable resource. In this study, dining‐hall food waste was used as a substrate for lactic acid production, and response surface methodology was employed to optimise the fermentation conditions. RESULTS: Lactic acid biosynthesis was significantly affected by the interaction of protease and temperature. Protease, temperature and CaCO₃ had significant linear effects on lactic acid production, while α‐amylase and yeast extract had insignificant effects. The optimal conditions were found to be an α‐amylase activity of 13.86 U g^?1 dried food waste, a protease activity of 2.12 U g^?1 dried food waste, a temperature of 29.31 °C and a CaCO₃ concentration of 62.67 g L^?1, which resulted in a maximum lactic acid concentration of 98.51 g L^?1 (88.75% yield). An increase in inoculum size would be appropriate for accelerating the depletion of initial soluble carbohydrate to enhance the efficiency of α‐amylase in dining‐hall food waste fermentation. CONCLUSION: A suitable regression model for lactic acid production was developed based on the experimental results. Dining‐hall food waste was found to be a good substrate for lactic acid fermentation with high product yield and without nutrient supplementation. Copyright © 2008 Society of Chemical Industry     

Restraining the associations of anthracene fluorophore by chemically linking to poly(methyl methacrylate)

Associations (dimer or aggregate) of anthracene (An) fluorophores tend to interrupt the monomer emission and reduce the quantum yield (Φ_PL); therefore, poly(methyl methacrylate) (PMMA) chain was used in this study to chemically link to anthracene and to block the mutual associations among the anthracene fluorophores. With this aim, the target polymers were prepared by anionic polymerizations with 9,10‐dibromoanthracene/s‐butyllithium as initiating system to proceed polymerizations of methyl methacrylate (MMA) directly or in the presence of 1,1‐diphenylethylene (DPE). Use of DPE before addition of MMA produces stable initiating anionic species and avoids potential side reactions during polymerization; however, it also introduces four β‐phenylene rings around the central anthracene ring, which interfere with the corresponding emission pattern and reduce the Φ_PL (32%) value due to potential interactions between phenylene rings and anthracene. On the contrast, polymerization without participation of DPE results in polymer with central anthracene ring directly connected to two PMMA chains, which gives clean vibronic emission pattern with limited association emissions and enhanced Φ_PL (52%) value. Physical blending of anthracene by PMMA is less efficient to restrain the associations and results in a film of lower Φ_PL (20%). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan,and heparin composite scaffold

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained many interests in recent year. In this study, the development of a chitosan‐heparin artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of heparin (Hep) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The Chito‐Hep composite AECMs were, respectively, crosslinked with glutaraldehyde, as well as cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC/NHS) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined by FT‐IR analysis. In physiological buffer solution (PBS), the EDC/NHS‐crosslinked Chito‐Hep composite AECM showed a relative lower water retention ratio than its glutaraldehyde‐crosslinked counterparts. The EDC/NHS‐crosslinked Chito‐Hep composite AECMs showed excellent biocompatibility, according to the results of the in vitro cytotoxic test. This result suggested that the EDC/NHS‐crosslinked Chito‐Hep composite AECMs might be a potential biomaterial for scaffold‐guided tissue engineering applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

机械合金化的机理及其在稀土永磁材料中的应用

简述了机械合金化的机理及其在稀土永磁材料中的应用。指出了今后用机械合金化技术制备稀土永磁合金需要解决的主要问题。     

除氧催化剂在氢冷机组中的应用

保证氢冷机组氢气安全运行是电厂安全管理的一项重要工作。将钯触媒应用于氢冷发电机组，降低氢气含氧量，对安全起到了保障作用本文讨论钯触媒的使用特性及使用后氢气纯度的标准、计量等问题。     

Stress in Dairy Farming and the Adoption of New Technology.

Previous studies have identified a number of different farm stressors and have reported gender and age differences in levels of stress. This study aimed to determine stress experienced by New Zealand dairy farmers, particularly in relation to adoption of new technology and its relationship to age and gender. Measures of farm stress and adoption of technology were completed by 985 dairy farmers. The highest levels of stress were reported for time pressures, machinery breakdown, weather, and government policies. Stress related to new technologies occurred rarely. Women reported more stress and higher levels of stress for understanding new technologies. There was also an increase in severity of stress with age related to new technologies. Overall, stress levels were moderate and may reflect favorable economic conditions. The findings suggest a need to tailor stress interventions to meet specific needs. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

高酸性气田压力容器无损检测

通过对压力容器四种常规无损检测方法进行分析对比,阐述了高酸性气田压力容器对接接头的无损检测方法和比例,在满足国内外现行标准规范的前提下,应加大超声波检测比例,对接触高酸性气体介质的焊缝内表面进行100%磁粉检测或渗透检测,最大限度地检测出焊缝内表面或近表面裂纹,确保高酸性气田地面建设工程的安全。     

高速并条机FA326的生产实践

介绍了FA326并条机的性能特点，并进行了纺纱工艺实践，认为FA326并条机能改善并条的条干不匀率、重量不匀率，提高半制品质量，可增加产品的市场竞争力。