基于S5933的PCI总线与8051的接口设计

简要介绍了PCI总线的特点，重点介绍了AMCC公司推出的S593X系列的高性能接口控制器，并通过实践给出基于S5933的PCI总线和8051的接口设计技术。     

New materials for diode laser pumping of solid-state lasers

The authors review recent progress in the development of new materials for III-V semiconductor diode lasers useful for pumping solid-state lasers. All of the diode lasers discussed are grown on GaAs substrates. Particular emphasis is placed on the performance and reliability of high-CW-power strained-layer InGaAs-AlGaAs diode lasers emitting in the wavelength range between 0.87 and 1.1 μm, improved resistance to degradation of 0.78 to 0.87 μm diode lasers afforded by the strained-layer AlInGaAs-AlGaAs and lattice-matched GaInAsP-GaInP materials systems, and improved performance of visible diode lasers utilizing the materials system GaInP-AlGaInP     

A frequency domain approach to fault detection in sampled-data systems

This paper deals with fault detection problems in sampled-data (SD) systems. A tool is first introduced for the analysis of intersample behavior of SD systems in the frequency domain from the viewpoint of fault detection and isolation. Based on it, a direct design approach of fault detection systems for SD systems is proposed, and further the problem of full decoupling from unknown disturbances is studied.     

炮孔内空气间隙作用的机理探讨

本文探讨了装药结构中空气间隙作用的机理,提出了气体分子的迁移效应与碰撞效应,比较完满地解释了不同空气间隙对爆破效果的影响.     

First-principles study of the tensile and fracture of the Al/TiN interface

Employing the density functional theory, we investigate the tensile and fracture processes of the Al/TiN(0 0 1) interface. The simulation presents directly the strain–stress relationship, the ideal tensile strength and the process of bond breaking of the system. Through the analysis of deformation, we find that the softer Al layers deform larger than the harder TiN layers during the tensile process. And fracture occurs between the interface and the sub-interface Al layers. In addition, the results show that during the tensile process, the ripple of the interfacial TiN layer decreases gradually with the increment of the strain. Charge transfer was detected from the Al to TiN layers near the interface area during the tensile process by means of charge density and density of states analyses. The charge transfer affects the fracture process. Compared to our previous study of the Al/TiN(1 1 1) interface, the Al/TiN(0 0 1) interface has smaller work of adhesion and larger tensile strength than the Al/TiN(1 1 1) interface. Our investigation shows that the fractures of the Al/TiN(0 0 1) and (1 1 1) interface systems both happen in the Al layers near the interface.     

用凯氏定氮仪测定蛋白质结果的不确定度评定

本文列出影响用凯氏定氮仪测定蛋白质结果的因子,依据测量不确定度评定规范,尝试对测定蛋白质结果不确定度的评价。     

东海盆地西南部地质特征与油气分布探讨

本文根据近3×10~4km地震和13口探井及其它地球物理、地质等方面资料,综合分析认为:东海盆地西南部与盆地其它部分在发育演化、构造运动、沉积环境等方面差异甚大。 盆地西南部(杭州湾—冲绳岛断裂以南地区)发育演化经历了断陷—坳陷—隆起—铺盖四个阶段。始新世末期的隆起在研究区演化史上有15～20Ma的沉积间断、剥蚀。这段历程,盆地其它部分未曾经历。其次是区内始新世末期抬升运动,致使始新统及以下老地层受剥蚀,仅始新统最大剥蚀量达1000m,这是盆地内绝无仅有的。第三是第三纪以海相沉积环境为主,特别在始新世,为海侵高潮,海城宽阔达8000km~2,这时盆地东北部正接受陆相沉积。研究区中部(北东向)可能存在超压泥岩及多套生油岩系,应为有利生油气区。研究区可能是盆地最有油气远景地区之一。     

用RAFA方法定量解析芳烃混合物的EEM

本文介绍了降秩因子分析(RAFA)方法,它是从一个多组分混合物中直接定量计算其中某一组分,而不必知道其它组分的物种及含量的一种定量分析的数学方法。它适用于双线性的数据。本实验首先将荧光分光光度计与外接计算机相连,以获得样品的激发-发射矩阵(EEM),再用RAFA方法对蒽、萘、菲、芘、芴、(艹屈)六种标样的一至五组分的混合物进行定量分析,获得满意的结果。     

厚度控制技术在中厚板轧制生产中的应用

本文探讨了影响中厚板厚度波动的因素，结合安钢中板厂2800mm轧机按合同轧制一批交货重量不大于理论重量船板的生产实践，总结了实际生产中实现高精度厚度控制的有效方法。     

一种可切削玻璃陶瓷的压痕断裂特性

将断裂韧性测试的压痕方法与压痕弯曲方法相结合，独立地分离出了压痕残余应力因子ｘ，使其成为可测参量，并建立了压痕一压痕弯曲的断裂韧性测试方法．将这种方法应用于一种可切削玻璃陶瓷的测试，获得的Ｋ１ｃ值为Ｋ１ｃ＝２．０３ＭＰａ·ｍ１／２，与单边切口法（ＳＥＮＢ）获得的Ｋ１ｃ值有较好的一致性．测得的残余应力因子Ｘ＝０．０９３，符合Ａｎｓｔｉｓ经验公式的预测．