用于铁谱分析磁化液使用规范的研究

本文简述了铁谱分析技术和磁化液的基本原理。在大量试验的基础上，建立了用于铁谱分析技术磁化液的使用规范。     

小型静压桩压桩力系数取值方法的探讨

由于《建筑桩基技术规范》 (JGJ94 - 94 )和《锚杆静压桩技术规程》 (YBJ2 2 7- 91)表达的不少概念和立足点有着根本区别 ,因此目前在小型静压桩设计、施工、质量检测和施工验收时相关人员在引用规范和规程时出现了不尽统一的现象。本文根据相应规范、规程的有关规定 ,结合现场试验 ,进行分析探讨 ,提出了小型静压桩压桩力系数的取值方法。     

STUDY ON GIS BASED PREDICTION SYSTEM FOR RADIO WAVE PROPAGATION IN UBAN REGION

In this letter, an integrated application of the prediction for radio wave propagation with the Geographic Information System (GIS) is presented and a real prediction system based on GIS is implemented.     

Fuel management of the HTR-10 including the equilibrium state and the running-in phase

The mode of fuel management of the HTR-10 was studied, including the simulation of the fuel shuffling process and the measurement of the burnup of a fuel element. The prior consideration was the design of the equilibrium state. Based on this the fuel loading of the initial core and the fuel shuffling mode from the initial core through the running-in phase into the equilibrium state were studied. The code system VSOP was used for the physical layout of the HTR-10 at the equilibrium state and in the running-in phase. For the equilibrium state, in order to lessen the difference between the peak and the average burnup, 5-fuel-passage-through-the-core was chosen for the fuel management. The average burnup of the spent fuel for the equilibrium core is 80 000 MWd t⁻¹, and the peak value of it is less than 100 000 MWd t⁻¹ when the burnup of the recycled fuel element is under 72 000 MWd t⁻¹. The mixture of fuel element and graphite element was used for the initial core loading, the volume fractions of the fuel and the graphite elements were 0.57 and 0.43, respectively. During the running-in phase, the volume fraction of graphite will decrease with the fresh fuel elements being loaded from the top of the core and the graphite elements discharged from the bottom of the core. The fuel shuffling mode is similar to that of the equilibrium state. The burnup limit of recycled fuel element is also 72 000 MWd t⁻¹ and the peak burnup is less than 100 000 MWd t⁻¹. Finally the core will be full of fuel elements with a certain profile of burnup and reaches the equilibrium state. According to the characteristics of the pebble-bed high temperature gas-cooled reactor, a calibrating method of concentration of ¹³⁷Cs was proposed for the measurement of fuel burnup.     

高效率窄线宽光纤激光器

本文报道了一种环形腔掺饵光纤激光器，得到了泵浦效率高达22.6%，输出线宽小于0.1nm的激光输出。     

走特色城镇建设发展之路--大理白族自治州开展白族民居建筑风格整治

一、基本情况和主要做法 “越是民族性的,就越是世界性的”。特色城镇建设已成为当今城镇规划建设的主潮流。 大理的洱海流域是以白族为主要世居民族的多民族聚居区,经过白族先民上千年创造并汲取各族优秀建筑文化智慧结晶白族民以其独特的院落布局、庭院绿化、照壁门楼、白墙青瓦、坡顶屋面、流檐飞阁、淡墨彩画、精美木雕和砖雕泥塑等丰富的建筑文     

Adaptive 2D finite element simulation of metal forming processes

The development and integration of available current methods and the development of new methods for an adaptive finite element analysis of metal forming processes are presented. The analysis includes large-strain, elastic–plastic, and thermal effects. Many numerical methods such as mesh generation, simulation of the contact between the workpiece and tool and die, and optimization of the finite element mesh are integrated and incorporated. In addition, an algorithm is developed which can detect certain severely distorted elements where the area of integration is approaching zero. The advantage of correcting these regions of locally distorted elements is demonstrated. These numerical methods are implemented in a finite element program developed for simulating metal forming processes, with the emphasis on automating the analysis. Examples include an axisymmetric stress simulation of a coldheading process, a plane strain simulation of an extrusion process and a plane strain simulation of orthogonal metal cutting, all with noticeable thermal effects. The orthogonal cutting forces and feed forces calculated are compared with two sets of experimental data, with good agreement.