Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)     

交联型聚醚聚氨酯的表征、力学性能及其碱金属盐络合物的导电性能

采用三羟甲基丙烷（ＴＭＰ）作交联剂与聚乙二醇（ＰＥＯ－１５４０）和甲苯二异氰酸酯（ＴＤＩ）反应，得到了具有较好力学性能的交联型聚醚聚氨酯（ＰＥＵ），该聚合物与ＬｉＣｌＯ４的结合物具有较高的室温电导率（σ３０℃＝１．８７×１０￣（－４）Ｓ／ｃｍ）。采用全反射红外光谱（ＡＴＲ－ＩＲ）对聚合物的结构进行了表征。对聚合物的组成、不同ＴＤＩ类型及络合盐浓度对聚合物力学性能及其络合物电导率的影响进行了探讨。低度交联聚合物的络合物，其电导率与温度的关系符合建立在自由体积理论上的ＶＴＦ方程，表明络合物中离子的传导主要是在无定形区域进行，与自由体积有关。     

回火处理对高碳冷拔钢丝强度和塑性的影响

研究了６５钢冷拔钢丝在５００℃不同时间回火时的抗拉强度和延伸率的变化。试验结果发现，在回火初期，抗拉强度首先增长，然后随口火时间的延长连续降低，而延伸率始终在增长，增长速度是先快后慢。这种行为可归因于第一内应力的消除和ε－碳化物在形变铁素体中的析出以及后来再结晶的发生。     

Solution of nonlinear kinematics of a parallel-link constrained Stewart platform manipulator

The Stewart platform manipulator is a fully parallel kinematic linkage system that has great advantages over typical serial link robots. However, one major problem in controlling this kind of manipulator is that, due to its closed kinematic chain and parallel-link constrained structure, it is impossible to derive an explicit kinematic solution. This paper proposes a simplified algorithm to numerically solve the forward kinematics of a six-links Stewart platform. Taking advantage of some fundamental geometric operations, the proposed algorithm involves only 3 nonlinear simultaneous equations. The explicit expressions are derived for some special configurations which can directly give the geometric limitations to motion in terms of the geometric dimensions of the platforms and the legs.Research was supported by Texas Advanced Technology program under grant 003656-008 and National Science Foundation under grant MSS9211970.     

羰基铁类随机混合吸波材料等效电磁参数的计算

本文为计及多重散射偶极子间的相互作用，引入参量εｈ和μｈ，导得一组公式。它不仅能计算铁氧体类也能计算羰基铁类的随机混合吸波材料的等效电磁参数，均与实验结果吻合良好。     

A constrained joint source/channel coder design

The design of joint source/channel coders in situations where there is residual redundancy at the output of the source coder is examined. It has previously been shown that this residual redundancy can be used to provide error protection without a channel coder. In this paper, this approach is extended to conventional source coder/convolutional coder combinations. A family of nonbinary encoders is developed which more efficiently use the residual redundancy in the source coder output. It is shown through simulation results that the proposed systems outperform conventional source-channel coder pairs with gains of greater than 9 dB in the reconstruction SNR at high probability of error     

电磁测量中误差产生的原因及消除方法

对电磁测量中所产生误差的原因进行分析,提出了消除不同误差所应采取的方法。     

加入WTO对我国水利科技工作的影响及对策

加入WTO后，对我国水利科技发展的影响主要表现在：研究开发活动、技术标准和知识产权保护方面，为适应WTO的各项规则，履行我国政府所作出的承诺，必须调整水利科技政策和发展战略，促进我国水利科技事业的健康发展。