The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

Si_（1－x）Ge_x／Si定向耦合器的研制

在运用ＳｉＧｅ脊形波导单模条件和有效折射率法分析ＳｉＧｅ／Ｓｉ定向耦合器结构参数的基础上，采用分子束外延和各向异性腐蚀技术制备出Ｓｉ１－ｘＧｅｘ／Ｓｉ（ｘ＝０．０５）单模定向耦合器．在波长为１．３μｍ时，平均串音小于－１８．１ｄＢ，输出功率耦合效率达到９８．１％     

α-戊(己)基肉桂醛的合成

采用聚乙二醇 ( PEG 2 0 0 )作相转移催化剂 ,用氢氧化钾醇水溶液代替氢氧化钾醇溶液合成了 α 戊 (己 )基肉桂醛 ,收率提高到 85%以上。用此工艺合成的产品纯度高 ,香气好 ,具有较高的工业实用价值。     

Deep levels,electrical and optical characteristics in SnTe-Doped GaSb Schottky Diodes

The GaSb layers investigated were grown directly on GaAs substrates by molecular beam epitaxy (MBE) using SnTe source as the n-type dopant. By using admittance spectroscopy, a dominant deep level with the activation energy of 0.23-0.26 eV was observed and its concentration was affected by the Sb₄/Ga flux ratio in the MBE growth. A lowest deep-level concentration together with a highest mobility was obtained for GaSb grown at 550°C under a Sb₄/Ga beam equivalent pressure (BEP) ratio around 7, which should correspond to the lowest ratio to maintain a Sb-stabilized surface reconstruction. In the Hall measurement, an analysis of the temperature-dependent mobility shows that the ionized impurity concentration increases proportionally with the sample’s donor concentration, suggesting that the ionized impurity was introduced by an SnTe source. In addition, optical properties of an undoped p-, a lightly and heavily SnTe-doped GaSb layers were studied by comparing their photoluminescence spectra at 4.5K.     

耦合腔行波管慢波结构的工作模式及其特性

耦合腔行波管慢波结构可工作于三种不同模式：正常模、简并模和反向模。应用改进的等效电路法计算了正常模腔通带和槽通带。求得的简并模耦合槽张角与实验值相符。最后讨论了反向模耦合腔行波管诱人的特点。     

红外加热胶接技术

提出了红外加热胶接的思想，并对红外加热胶接技术作了简单阐述。介绍了一种红外加热胶接矿用阻燃、防腐、橡塑风筒布的装置。     

电子称在化工生产中的应用

针对化工生产环境的特点对电子称重仪器在化工计量中的正确选择和使用作一些分析阐述。     

连续驱动摩擦焊动态扭矩检测的新方法—VCMM法

连续驱动摩擦焊动态扭矩检测的新方法──ＶＣＭＭ法刘金合，罗键连续驱动摩擦焊扭矩是一个重要的工艺参数。摩擦焊扭矩是动态扭矩，具有时变性、速变性以及变化范围大等特点。现有的检测摩擦焊扭矩的方法均有一定的局限性’‘－’‘，本文提出了通过驱动主电机定子电压和...     

二苯并-18-冠-6的合成条件的优化

通过改变溶剂的极性、离子性、离去基团的活性及反应温度等方法,对传统的Pedersen冠醚合成法进行了优化,使目标产物的最高产率达到71%以上.产物通过IR、1H NMR及元素分析等方法进行结构表征.     

多级脉冲深穿透射孔技术

目前国内较先进的射孔工艺是增效射孔和三相流射孔,这2种射孔工艺均存在射孔深度和造缝深度浅的问题,尤其是对低渗油藏和纵向渗透率远大于横向渗透率的油藏,此造缝深度并不能满足油田生产的需要.介绍了一种新型的射孔技术,它是一种能进行深度射孔造缝的多级射孔技术,利用三级推进剂燃爆时产生峰值不连续的高温、高压气流,形成多级脉冲,多次冲击射孔孔眼前沿的裂缝,使其有效延伸至地层深处,从而较单独的射孔更能有效地增加油气产量.通过地面水泥靶的试验,证明了该射孔器的延缝功能和安全性;通过塘32等井的现场试验,证明该射孔技术对污染地层解堵有显著效果,可明显地降低地层破裂压力.