Determination of the liquidus lines and isotherms of the Hg-Zn-Te system by a modified direct observation method

The modified direct observation method is employed for the determination of the liquidus lines in the (Hg_{1_x}Zn_x)_{1_y}Te_y, ternary system. The liquidus temperatures of the ternary samples of various compositions withx from 0.05 to 0.30 andy from 0.5 to 0.9 are measured. The temperature-composition phase diagrams and some liquidus isotherms are established for this system.     

光纤数字环路载波系统的发展

ＯＤＬＣ是当今用户接入网的新型设备，它一方面可取代端局，解决通信线路紧张和远距离大容量放号问题，另一方面也可满足日益增多的增值业务的需求。本文ＯＤＬＣ技术的基本原理，结合目前国内外常见ＯＤＬＣ系统，总结和对比了其基本特点，优势，并指明ＯＤＬＣ的技术发展方向和中国应用的前景。     

Diagnosis of tapping operations using an AI approach

On-line diagnosis of the machining operations is essential because it can prevent potential problems caused by abnormal conditions. So far, little research has been done for the on-line diagnosis of tapping operations. However, tapping is a very important machining operation. And the on-line diagnosis is essential. In this work, an artificial neural network was utilized for the diagnosis of the tapping operation. The input vector for the neural network is obtained by processing the signals of the thrust, torque, and lateral forces during the tapping operations. A total of ten indices were used in the input layer of the network. The output of the artificial neural network provides the tapping states. Five different tapping states were investigated: normal operation, tap wear, misalignment, oversize hole, and undersize hole. The weights and thresholds of the artificial neural network can be modified by the generalized delta rule. Experimental results showed that diagnosis of tapping operations through an artificial neural network can reach a success rate of over 95%.     

PERIODIC DYADIC GREEN''S FUNCTION FOR FIELD ANALYSIS IN EMC CHAMBER

Herein a novel Dyadic Green's Function (DGF) is presented to calculate the field in ElectroMagnetic Compatibility (EMC) chamber. Due to the difficulty of simulating the whole chamber environment, the analysis combines the DGF formulation and the FEM method, with the latter deals with the reflection from absorbers. With DGF formulation for infinite periodic array structures, this paper investigates electromagnetic field in chamber with truncated arrays. The reflection from the absorber serves as the virtual source contributing to the total field. Hence the whole chamber field calculation can be separated from the work of absorber model set-up. Practically the field homogeneity test and Normal Site Attenuation (NSA) test are carried out to evaluate the chamber performance. Based on the method in this paper, the simulation results agree well with the test, and predict successfully the victim frequency points of the chamber.     

纳米陶瓷的制备

纳米陶瓷材料可显著降低材料的烧结致密化程度,节约能源;并可改善陶瓷材料的性能,提高其使用可靠性。主要介绍了纳米陶瓷的制备方法,包括纳米陶瓷粉体的制备、成型和烧结。     

Preparation and characterization of metal-complex imprinted PVDF hollow fiber membranes

Using nickel-2,2′-dipyridyl complex as a template, N-vinyl-2-pyrrolidone as the metal coordination functional monomer, and ethylene glycol dimethacrylate as the crosslinker, polyvinylidene fluoride (PVDF) hollow fiber ultrafiltration membrane as the supported membrane, metal complex imprinted polymeric membranes were prepared. The association constant of template-monomer interaction in the prepolymerization solution was estimated to be 4.38 × 10⁴ (L/mol)² by spectrophotometric titration analysis. The attenuated total reflection Fourier transform infrared spectroscopy and scanning electron micrograph characterization indicated that the surface of the support PVDF membrane was completely coated by the imprinted polymer layer after modification. The imprinted membranes exhibited the selective permeability for the template in certain nickel acetate solution. The molecularly imprinted membranes gave higher permeation separation factors at about pH 6, whereas increasing pressure would lower the separation ability. The effects of ion concentration, cations and counterions, ligand selectivity, pH, and trans-membrane pressure were investigated and the permeation performances of the imprinted membranes could be regarded as facilitated transport mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A multi-criterion interaction-oriented model with proportional rule for designing supply chain networks

Supply chain management has offered a way to improve the industrial environment becomes more competitive. While, the commonly seen methodologies may be effective in solving the production–distribution problem only from supplier- or customer-oriented consideration, those cannot present the interactive relationship between upstream and downstream enterprises. In the competitive semiconductor industry environment, considering the viewpoints of the supplier and consumer simultaneously is particularly required, because multiple manufacturing and demanding steps are performed at separate situations, concurrently. In this paper, we propose an interaction-oriented approach, which bases on the analytic hierarchy process (AHP) methodology and proportional rule, to solve the semiconductor distribution problem with multiple quantitative and qualitative criteria. The developed approach gives an expected satisfaction for the all participators of the whole chain while the cooperative information is shared perfectly and effectively. Analysis results demonstrate the proposed methodology is efficient and effective through a real world case study.     

钢坯修磨金属切除率数学模型的研究

从分析修磨过程运动学和单个磨粒切削入手,建立了磨削深度与磨削过程诸参数(如工艺、材料性能、砂轮性能等)的关系表达式,从而建立起金属切除率与各单项参数的定量关系,为改善或提高修磨效率和修磨过程控制提供了有意义的根据。理论分析与实验结果吻合良好。