钢管内径光电检测装置

介绍了一种检测细长钢管内径的光电检测装置。该装置利用线阵ＣＣＤ作传感器，采用８０３１单片机作为主控制。     

有机盐聚合醇氯化钾钻井液的应用

霍尔果斯背斜构造极其复杂,内应力极高,地层倾角大,断层、破碎带多,并存在高低压互层;安集海河组的灰绿色软泥岩水化严重并具有粘弹塑性.该区块重点探井霍003井三开、四开井段选用有机盐聚合醇氯化钾钻井液,同时为保证钻井液在高密度下（2.55 g/cm^3）具有好的流变性,使用活化铁矿粉、活化重晶石加重.应用结果表明,由于采用了强抑制和多元封堵的措施,该钻井液具有良好的流变性和较强的携带能力,钻进中曾携带出重2.8 kg和5.1kg的大掉块;滤失量低,泥饼质量好,封堵能力强,造壁能力强,减轻了井下阻卡程度;有良好的储层保护能力;在室内研究的基础上,经过现场合理使用和维护钻井液,霍003井提高了机械钻速,缩短了钻井周期,井身质量优于邻井.指出在高密度下,未选出适合有机盐聚合醇氯化钾钻井液的稀释剂,钻井液流动性较差.     

Transformations for nonideal uniform circular arrays operating in correlated signal environments

The Davies transformation is a method to transform the steering vector of a uniform circular array (UCA) to one with Vandermonde form. As such, it allows techniques such as spatial smoothing for direction-of-arrival (DOA) estimation in a correlated signal environment, developed originally for uniform linear arrays, to be applied to UCAs. However, the Davies transformation can be highly sensitive to perturbations of the underlying array model. This paper presents a method for deriving a more robust transformation using optimization techniques. The effectiveness of the method is illustrated through a number of DOA estimation examples.     

Dual-Mode Microstrip Open-Loop Resonators and Filters

A miniature dual-mode microstrip open-loop resonator is proposed. Distinct characteristics of this new type of dual-mode resonator are investigated using full-wave electromagnetic simulations. It is shown that the two operating modes, i.e., the even and odd modes, within a single dual-mode resonator of this type do not couple. It is also found that there is a finite-frequency transmission zero inherently associated with the even mode. Two two-pole filters using this type of dual-mode resonator are demonstrated with opposite asymmetric responses, which result from different locations of the transmission zero. Higher order filters of this type are also investigated. Both simulated and measured results are presented.     

基于人机工程学3E原则的防暴弹安全因素分析

对防暴弹的安全因素进行分析，运用人机工程学事故控制的3E原则，并结合国外的一些先进的做法加以指导和借鉴。旨在用人机工程学事故控制理论对防暴弹安全生产使用进行优化。     

UV-LIGA深度光刻机平滑衍射技术研究

UV-LIGA深度光刻技术是加工微型机电系统的一项重要的微细加工技术。介绍了一种平滑衍射效应的位错强度叠加原理，它采用了蝇眼积分透镜去平滑衍射，并模拟数值计算了硅片表面的光强分布，最后给出了光刻结果。     

HTR-10燃料元件装卸系统冷态调试

10MW高温气冷实验堆（HTR－10）是一座球床堆，由燃料元件装卸系统实现燃料元件的装卸和循环，且不需要停堆，为保证HTR－10的正常运行，燃料元件装卸系统必须安全，可靠，为此，必须对燃料元件装卸系统进行周密，细致的调试试验和验证，本文介绍了燃料元件装卸系统冷调试的主要调试项目，调试方法和调试结果。     

基于分形理论的供应链管理模型分析

为了克服日益复杂的供应链问题,在分形理论的基础上介绍了分形供应链的概念和特点,认为分形供应链所具有的自相似、自组织、自优化等特点可以很好地提高供应链的灵活性,增强适应环境的能力.在此基础上进一步研究了分形供应链的结构模型和运作模型,探讨了其现实意义.