鄂尔多斯西缘前陆盆地巨厚黄土地区地震采集技术

鄂尔多斯西缘前陆盆地表层地质地貌极其复杂，有巨厚黄土区、黄土-沙漠区及山前砾石-黄土区，独特的黄土地貌使得地震采集面临着诸多技术难题。根据以往巨厚黄土地区地震采集经验，采用多种方法系统地开展黄土表层结构精细调查，深入研究黄土地球物理特征及激发因素与表层黄土结构之间的关系，优选激发井位和井深，确保了激发效果；采用小道距、三线小线距、高密度空间采样技术，获得了高信噪比、高分辨率地震资料。研究表明，巨厚黄土地区地震采集时应优选激发井位和岩性，合理选择激发井深；坚持多深井组合激发、单井药量不宜过大总药量要大两项基本原则；采用高密度采样技术，提高采集资料的覆盖次数和信噪比。图10表1参15     

环氧乙烷罐式集装箱设计

根据环氧乙烷罐式集装箱的结构特点,对其进行了有限元分析计算并优化了其框架的结构形式.经评审及验证性试验,该环氧乙烯罐箱结构具有紧凑合理、储存体积大、安全可靠的优点.     

发动机连杆螺纹孔加工质量的改进

对发动机连杆螺纹孔在攻丝过程中出现烂牙、粗糙度差等加工质量问题进行了分析，提出了解决问题的方法，使连杆的合格率行到显著的提高。     

A time aggregation approach to Markov decision processes

We propose a time aggregation approach for the solution of infinite horizon average cost Markov decision processes via policy iteration. In this approach, policy update is only carried out when the process visits a subset of the state space. As in state aggregation, this approach leads to a reduced state space, which may lead to a substantial reduction in computational and storage requirements, especially for problems with certain structural properties. However, in contrast to state aggregation, which generally results in an approximate model due to the loss of Markov property, time aggregation suffers no loss of accuracy, because the Markov property is preserved. Single sample path-based estimation algorithms are developed that allow the time aggregation approach to be implemented on-line for practical systems. Some numerical and simulation examples are presented to illustrate the ideas and potential computational savings.     

混凝土生产监控和管理系统研究

提出并实现了一个基于计算机网络的混凝土生产监控和管理系统，该系统对混凝土生产企业的整个生产、销售过程进行有效的监控和管理，并在此基础上生产、销售的数据进行组织分析，为管理者提供可靠的、科学的决策依据，从而提高产品的质量和生产效果。     

CVD金刚石膜生长过程的Raman分析

采用激光Raman散射分析法对CVD金刚石膜的生长过程进行研究 ,讨论在金刚石膜生长的不同阶段 ,膜内金刚石和非金刚石成分的相对含量及其残余应力的变化情况     

一种简便通用的快速干涉检查算法

提出了一种简便通用的快速干涉检查算法.该算法是在机械CAD中,利用合理排序、简化建模、网格图和离散时间表、运动路径简化等方法从而实现快速干涉检查的一种方法.     

近非临界相位匹配温度调谐MgO：LiNbO3OPO

通过对MgO:LiNbO3参量过程温度相位匹配及走离角，允许参量等运转参数的理论计算与分析，确定了晶体的切割角度θ=82℃，以近非临界相位匹配（NCPM）取代NCPM，将温度调节范围控制在较低的温度上，研制了532nm泵浦的MgO:LiNbO3温度调谐脉冲光学参数振荡器（OPO），在800～1700nm波段实现连续调谐输出。参量泵浦功率密度阈值为57.3MW/cm^2，泵浦能量约2倍阈值处，单谐振（SRO）参量转换效率为11%以上。     

真空热处理工艺参数的选取

通过多种材料、多种工件、多批次的加工，对常见真空热处理工艺参数的确定，摸索出一些经验公式，并在实际生产中取得很好效果。     

Properties of latex blends and its modified cement mortars

In this paper, the mechanical properties of three latex blends and the mechanical properties and chloride diffusivity of the latex-modified mortars are studied. The relationships between the properties of polymer films formed from latex blends and the properties of the latex blend-modified mortars are illustrated. The test results showed that the modified mortar with the blend of styrene-acrylic ester (SAE) and styrene-butadiene rubber (SBR) showed synergistic effect; especially the flexural strength of the SAE/SBR blend-modified mortars was about 20-40% higher than that of monolatex-modified mortars. However, the vinyl chloride-vinylidene chloride copolymer (PVDC)/SBR and PVDC/SAE blends-modified mortars showed antisynergistic effect. The compressive strength of the modified mortars increased with the increasing of the tensile strength of the latex films, while the flexural strength of the modified mortars did not depend on the tensile strength of the latex films. When PVDC with the mass fraction of 0.2 or SAE copolymer emulsion with mass fraction of 0.4 was blended into SBR latex, the latex blend-modified mortars showed lower chloride diffusivity. The chloride diffusivity of the modified mortars increased approximately linear with the tensile strength of the latex blend films, and decreased with increase of the elongation at rupture of the latex blend films. When the elongation at rupture of the latex blend films increased from 200-300% to more than 800%, the chloride diffusivity of the modified mortars decreased from 10-15×10⁻¹² to 3-4×10⁻¹² m²/s.