基于ARM处理器的数字PID伺服电机调速系统

介绍了基于ARM处理器的数字PID控制方式实现对直流伺服电机的调速。调速系统根据实际情况,采用了优化PID的算法并移植了μC/OS-Ⅱ实时操作系统,使得电机的调速性能在快速性、平稳性方面都得到了很大的提高。整个伺服控制系统结构简单、控制方便、实时性高,已经取得了良好的实验效果,可以满足电机高速高精度的运行要求。     

Room temperature ferromagnetism of Ni, (Ni, Li), (Ni, N)-doped ZnO thin films

Ni-doped ZnO thin films (Ni concentration up to 10 mol%) were generated on Si (100) substrates by a sol-gel technique. The films showed wurtzite structure and no other phase was found. The chemical state of Ni was found to be bivalent by X-ray photoelectron spectroscopy. The results of magnetic measurements at room temperature indicated that the films were ferromagnetic, and magnetic moment decreased with rise of Ni concentration. The magnetization of Ni (10 mol%)-doped ZnO film annealed in nitrogen was low...     

Study on electrothermally actuated cantilever array for nanolithography

Nanolithography is a patterning technique for the fabrication of nano-scale structures.A promising method of nanolithography known as scanning probe lithography has particularly extensive applications for its high resolution,high reliability,and simple operation.In this paper,a novel electrothermally actuated cantilever with integrated heater,thermal conductor and actuator for scanning probe lithography is proposed.Cantilevers are designed in an 8×4 array.Analytical models are presented to simulate the temp...     

Effect of heat treatment on mechanical properties of heavily cold-rolled Fe-6.5wt%Si alloy sheet

Fe-6.5wt%Si alloy has excellent soft magnetic properties,but it is hard to be cold-rolled due to appearance of ordered phases in this alloy.In this paper we report that ultra thin Fe-6.5wt%Si sheet of 0.05 mm thick was obtained by heavily cold rolling.By means of optical microscope,micro-hardness indenter,instron,SEM and X-ray diffraction,the effect of heat treatment on mechanical properties of this alloy sheet was investigated.The heavily cold-rolled sheet exhibits some extent of ductility.The ultimate ten...     

载银/铜NaA分子筛的制备及抗菌性能研究

探讨了液相离子交换法制备载银/铜NaA分子筛抗菌剂的实验条件,并对载银/铜NaA分子筛样品中载银、铜的含量,抗变色性能及对大肠杆菌、金黄葡萄球菌的抗菌性进行检测。结果表明,与单独载银的NaA分子筛相比,载银/铜NaA分子筛中银和铜含量分别达到5.5%和1.6%,色差更小,抗菌性显著提高。     

柔性软管敷设过程及安装计算分析

柔性软管有水平敷设方式和垂直敷设方式,2种敷设方式均可划分为4个敷设过程。介绍软管具体敷设过程及特点,论述软管安装计算分析理论。针对工程项目实例,依据软管敷设过程,进行柔性软管安装计算分析,确定软管敷设工作所需关键参数。研究工作可对柔性软管在海洋石油工程上的应用提供参考。     

新型钢筋混凝土叠合结构体系研究

随着我国建筑事业的飞速发展,建筑能耗不断增加,已成为不能忽视的问题,大力发展节能建筑势在必行。新型钢筋混凝土叠合结构体系由预制构件在现场组装并浇筑部分混凝土叠合而成,具有很好的整体性、抗震性以及卓越的节能环保性能,在很大程度上降低了建筑能耗。探讨了此体系的(主要构件、典型节点、构造措施)设计方法、工厂制作工艺、现场装配施工过程及关键技术问题。为我国建筑事业逐步迈入节能环保、安全耐久的可持续性发展奠定了基础。     

飞秒激光作用下金属箔材的温度场研究

为分析飞秒激光作用下金属材料的温度场及其影响因素,基于一维双温模型对飞秒激光作用下铜箔的温度场进行数值求解。采用脉宽100～800 fs,能量密度509.30～2 546.48 J/m2的激光参数进行计算,研究电子和晶格温度随时间和深度的变化规律。结果表明,电子温度在10-13 s时间尺度达到峰值,在此期间晶格温度保持不变,此后通过耦合作用二者在几ps时间尺度达到热平衡;脉宽越短,电子温升越快、峰值温度越高、耦合时间越短;而能量密度越大,电子温升越快、峰值温度越高、耦合时间越长。     

基于CAN总线的温度测控系统

介绍了基于CAN（Controller Area Network）总线的分布式温度测控系统,利用CAN总线将各温度采集控制模块与上位计算机连接起来,使系统不仅具有基本的温度测控功能,还可进行集中监控、参数设置、数据管理、报表打印等操作,提高了工作效率.文中重点讨论了它的硬件构成及软件设计。     

高原地区数据中心海拔因素对供电系统设计的影响

本文分析了高原海拔和空气等环境因素对数据中心高低压变配电系统、通信电源系统、后备柴油发电机组等电源设备的影响,对高原数据中心的供电设计进行了探讨,提出高原地区数据中心电源设计中应对高原特殊环境采用的应对技术措施。