中小型企业主的魅力型领导行为方式对下属影响机制研究

研究采用魅力型领导、自我结构、自尊、自我效能以及组织公民行为问卷,在30家中小型企业收集了206份调查问卷。通过中介关系结构模型分析表明魅力型领导行为可以通过员工的自我效能和自尊而作用于组织公民行为。     

利用大比例尺地形图计算库区土地淹没面积

在三峡库区重庆市移民规划管理信息系统、丹江口水库移民规划管理信息系统和乌江彭水水电站移民规划管理信息系统的基础上,开发出了利用大比例尺地形图的等高线来实现精确计算库区土地淹没面积的模块.本模块可以应用于土地淹没计算、移民搬迁和城镇新址选择等工作中,经过多个项目的检验,本模块提供的计算数据和淹没示意图既可作为正式的成果数据和图表,也可为高层决策者决策时提供参考.     

沸石咪唑酯骨架衍生碳基复合材料的结构及其超级电容器的性能

通过原位生长方法将沸石咪唑酯骨架颗粒镶嵌在聚吡咯管(质量分别为30,60,120 mg)上,再经一步热处理法碳化和活化后制备得到碳基复合材料,研究了该材料的微观结构和电化学性能,以及其组装的双电层超级电容器的电化学性能.结果表明:复合材料由碳纳米管和管外表面的氮掺杂碳颗粒组成,具有较大的比表面积和高的氮元素含量,微孔孔...     

分布式智能ERP体系结构的研究

文章分析了传统ERP系统存在的问题,针对系统智能性、可重构性差等缺点,基于"软件人"、多库协同等技术提出了"分布式智能ERP系统"的体系结构模型,为系统的设计和应用提供了基础.     

OPTIMIZING LAYOUT OF URBAN STREET CANYON USING NUMERICAL SIMULATION COUPLING WITH MATHEMATICAL OPTIMIZATION

1. INTRODUCTION Vehicular emissions have become one of thmain sources of urban atmospheric pollution in Chinwith the development of the urban construction andthe increase in the number of vehicles. There are lots of factors influencing the transport and dispersion of vehicular exhausted pollutants and further influencing the local air quality, among which the gas dynamical effect due to the mechanical turbulence from huge buildings and street canyons is especially remarkable. Previous stu…     

基于ARM处理器的数字PID伺服电机调速系统

介绍了基于ARM处理器的数字PID控制方式实现对直流伺服电机的调速。调速系统根据实际情况,采用了优化PID的算法并移植了μC/OS-Ⅱ实时操作系统,使得电机的调速性能在快速性、平稳性方面都得到了很大的提高。整个伺服控制系统结构简单、控制方便、实时性高,已经取得了良好的实验效果,可以满足电机高速高精度的运行要求。     

载银/铜NaA分子筛的制备及抗菌性能研究

探讨了液相离子交换法制备载银/铜NaA分子筛抗菌剂的实验条件,并对载银/铜NaA分子筛样品中载银、铜的含量,抗变色性能及对大肠杆菌、金黄葡萄球菌的抗菌性进行检测。结果表明,与单独载银的NaA分子筛相比,载银/铜NaA分子筛中银和铜含量分别达到5.5%和1.6%,色差更小,抗菌性显著提高。     

Study on electrothermally actuated cantilever array for nanolithography

Nanolithography is a patterning technique for the fabrication of nano-scale structures.A promising method of nanolithography known as scanning probe lithography has particularly extensive applications for its high resolution,high reliability,and simple operation.In this paper,a novel electrothermally actuated cantilever with integrated heater,thermal conductor and actuator for scanning probe lithography is proposed.Cantilevers are designed in an 8×4 array.Analytical models are presented to simulate the temp...     

Effect of heat treatment on mechanical properties of heavily cold-rolled Fe-6.5wt%Si alloy sheet

Fe-6.5wt%Si alloy has excellent soft magnetic properties,but it is hard to be cold-rolled due to appearance of ordered phases in this alloy.In this paper we report that ultra thin Fe-6.5wt%Si sheet of 0.05 mm thick was obtained by heavily cold rolling.By means of optical microscope,micro-hardness indenter,instron,SEM and X-ray diffraction,the effect of heat treatment on mechanical properties of this alloy sheet was investigated.The heavily cold-rolled sheet exhibits some extent of ductility.The ultimate ten...     

Room temperature ferromagnetism of Ni, (Ni, Li), (Ni, N)-doped ZnO thin films

Ni-doped ZnO thin films (Ni concentration up to 10 mol%) were generated on Si (100) substrates by a sol-gel technique. The films showed wurtzite structure and no other phase was found. The chemical state of Ni was found to be bivalent by X-ray photoelectron spectroscopy. The results of magnetic measurements at room temperature indicated that the films were ferromagnetic, and magnetic moment decreased with rise of Ni concentration. The magnetization of Ni (10 mol%)-doped ZnO film annealed in nitrogen was low...