基于图像处理的工业烟尘排放监控系统的研究*

为减小或消除工业生产中产生的烟尘对环境的影响,利用图像二值化方法对前端设备采集的图像进行灰度化转换,在此基础上对灰度化图像采用传统的滤波方法处理.设计一套烟尘排放监控系统,可根据烟尘的排放情况来控制设备处于最优的运行状态,达到节能减排的效果.     

充气柜KEM-40.5双隔离结构的设计

随着许继KEM-40.5系列充气柜的大量推广与应用,客户对产品的功能需求也越来越高,其中包括双隔离开关结构的问题。针对目前充气柜KEM-40.5产品单隔离结构问题,通过对比分析单、双隔离结构的特性及原理,在不改变开关柜整体外形尺寸的情况下,在开关柜的出线路侧增加一组隔离开关,并妥善解决好三工位开关本体安装及气箱的干涉问题,还有合理分配带电显示器取电位置,以便捷高效解决整柜电气联锁等问题。将双隔离开关成功应用于实际工程案例中,为后续产品的升级改进提供了思路。     

小型化低功耗机载显示器图形系统设计与实现

为了满足机载显示器图形生成系统的小尺寸、低功耗需求,提出了一种基于龙芯2K1000的全国产图形生成与处理方案。该方案以2K1000为核心构建硬件平台,使用2K1000内部集成的中央处理器、图形处理器、显示控制器,以及外部的内存实现图形的计算生成和双缓存显示,配合国产可编程逻辑器件实现图形与外视频的叠加显示及机载通信总线扩展。软件上采用航空专用的国产天脉操作系统,基于天脉操作系统设计了关键的图形显示驱动、帧存驱动、显示控制器驱动。实验结果表明,在输出1 024 pixel×768 pixel分辨率显示时,典型机载图形画面帧率达到35 frame/s,整体功耗约10 W。该方案扩展性强、功耗低,满足实时显示需求,在机载显示器领域有着广泛的应用空间。     

Base on the Public Scientific Quality Improvement Research on Risk Early Warning of Online Shopping

LTE-A network offers data rates up to 1 Gbps which is 10?×?faster than LTE catering to growing demand of users. LTE improves user experience by reducing latency and increasing bandwidth efficiency. The emerging services and key enhancements such as Further Enhancement of Downlink Multiple-Input Multiple-Output (MIMO), Heterogeneous Networks, and Carrier Aggregation (CA) in LTE-A has improved performance of LTE-A networks. Scheduling optimization still remains one of the biggest challenges in high speed data transmission network. Scheduling in LTE-A networks are performed at various levels; User Equipment (UE), Serving Gateway (SGW), Air Interface and eNodeB. Remote Radio Head (RRH) is an extremely specialized device installed at antenna of eNodeB for optical to electrical signal conversion, amplification of signals and Uplink and Downlink Scheduling. Resource scheduling at Antenna of eNodeB module is constituted as a significant research optimization area. This paper proposes a soft computing based scheduler for RRH. Results of proposed technique are evaluated on Fairness Index, Throughput, Spectral Efficiency and Rank Indicator Distribution. The proposed algorithm aims to improve performance of scheduling. From experimental results, it is observed that proposed model succeeds to achieve significantly better performance as compared to state-of-art algorithms.

     

A Plug-and-Play,Scalable Control Method for AC Island Microgrid

Wireless Personal Communications - In this paper, a scalable, plug-and-play (PnP) and system-stable synthesis control method is proposed for the AC island microgrid consisting of a distributed...     

Structural and optical properties of AIN sputtering deposited on sapphire substrates with various orientations

AIN thin films were deposited on c-,a-and r-plane sapphire substrates by the magnetron sputtering technique.The in-fluence of high-temperature thermal annealing (HTTA) on the structural,optical properties as well as surface stoichiometry were comprehensively investigated.The significant narrowing of the (0002) diffraction peak to as low as 68 arcsec of AIN after HTTA implies a reduction of tilt component inside the AIN thin films,and consequently much-reduced dislocation densities.This is also supported by the appearance of E2(high) Raman peak and better Al-N stoichiometry after HTTA.Furthermore,the in-creased absorption edge after HTTA suggests a reduction of point defects acting as the absorption centers.It is concluded that HTTA is a universal post-treatment technique in improving the crystalline quality of sputtered AIN regardless of sapphire orienta-tion.     

An SPH-based mass transfer model for simulating hydraulic characteristics and mass transfer process of dammed rivers

Engineering with Computers - Aerated flow characterized by complex mass transfer processes with multiple hydraulic properties is a common enviro-hydraulics phenomenon, which have a variety of...     

聚类分割的交互式遥感热红外图像模糊增强北大核心CSCD

交互式遥感热红外图像在边缘区域的像素呈现较强交互干扰,缺少必要区分过程,导致增强后的交互式遥感热红外图像视觉效果差、抗噪性能差、增强效率低。提出基于聚类分割的交互式遥感热红外图像模糊增强方法,采用模糊C均值聚类算法,对交互式遥感热红外图像聚类分割处理,对边缘区域特殊及弱小交互目标分割,进一步区分交互区域的干扰,缩短后期增强所用的时间。采用中值滤波方法去除交互式遥感热红外图像中存在的噪声,结合Sobel算子和二阶微分算子的拉普拉斯算子对去噪后的交互式遥感热红外图像进行锐化处理,通过图像去噪和图像锐化实现交互式遥感热红外图像的模糊增强。仿真实验可知,所提方法进行交互式遥感热红外图像模糊增强所获取的图像清晰度较高、抗噪性能较佳、增强效率较高。     

静电喷印技术在太赫兹超表面制备中的应用

近年来,太赫兹技术快速发展,基于超表面的太赫兹器件受到广泛关注,并已应用于太赫兹成像、光谱和生物传感等诸多领域。但太赫兹超表面器件的制备复杂且成本高,而静电喷印技术无需掩模版,成本低、精度高且易于在异形曲面上制作。基于静电喷印技术设计和制备了太赫兹吸波器,并利用太赫兹时域光谱系统（THz-TDS）对样品进行了性能测试,实验与仿真结果基本相符,在0.098~0.353 THz频段内吸收大于90%。此外,还设计了太赫兹线极化转换器,在0.167~0.355 THz频段内的极化转换大于95%,相对带宽约72%,并分析了所设计样品的制备工艺条件,验证了静电喷印技术对于制备太赫兹极化转换器的可行性。研究成果表明,静电喷印技术在太赫兹超表面器件的制备中具有广泛的应用前景。