苯乙烯与1-(2-叔丁基过氧异丙基)-3-异丙烯基苯共聚行为研究

苯乙烯与1－（2－叔丁基过氧异丙基）－3－异丙烯基苯（D120）能进行自由基共聚合反应，聚合后过氧基团以侧基的形成被保留在共聚物大分子链上，凝胶色谱分析发现，随原料单体中D120比例增加，共聚物的分子量减小，分子量分布变窄，DSC分析发现共聚物中过氧基团的分解温度随D120结构单元含量的增加而下降，但仍高于D120单体过氧基团的分解温度，苯乙烯与D120的竞聚率为：rD120=0.700,rSt=0.714。     

Bioeffects of Low Energy Ion-Beam Implantation and Vacuum Treatment on M1 Arabidopsis Thaliana

Vacuum treatment and ion-beam bombardment are two major processes in the low energy ion-beam implantation. To accurately study the contributions of these two major factors to the bioeffects separately, the M1 generation variation of Arabidopsis thaliana with ion-beam implantation and vacuum treatment were compared through a series of key plant development parameters including morphological observation, biochemical assay and RAPD （random amplified polymorphic DNA） analysis. The results showed that ion-beam implantation had obvious effect on almost all of these parameters, and the vacuum treatment had some impacts on several morphological parameters such as the bolting time and the length of the primary stem. Taking the results together, the indication is that vacuum treatment has some slight contributions to the bioeffects of ion-beam implantation while ion-beam bombardment itself is the major creator of the bioeffects.     

P／MCs新型复合材料制备、结构及阻尼性能

采用特殊的渗流法所制备的新型Ｐ／ＭＣｓ复合材料，由高分子聚合物与蜂窝状铝架组成，它具有优异的阻尼性能，并简述了结构对阻尼的影响     

FEATURE SOLID MODELING TOOL SYSTEM:FSMTS

In conformity with the principle of Design for Manufacture,feature-based design strate-(?)es have been developed.As the“feature”is relevant to the“macro process plan”and“macro NCprograms”,obviously,“feature”is beyond the power of conventional solid modellers.Neverthe-less,substantial breakthrough has not been made in the solid modeling field,except“feature at-taching”or“feature recognizing”methods have been taken on.In this paper,the theory,concepts,system architecture,and algorithm principles of solid modeling tool system have beenrepresented.The practice of Feature Solid Modeling Tool System (FSMTS) developed atHuazhong University has proved that the tool may be a new foundation of Feature-Based Design.     

浅谈韶钢物流信息系统的开发

结合韶钢物流系统应用开发，谈谈基于ASP，NET＋ORACLE的信息化建设之Web应用平台构筑上的思路、经验。     

深入贯彻十六大精神加速企业创新体系建设为全面实现"十五"目标而奋斗

总结了2001年以来冶金集团总公司的科技质量工作,指出了存在的主要问题,布署安排了今后两年的科技工作。     

非化学计量LaNi5型储氢合金的性能

采用富La混合稀土与Ni、Co、Mg等元素组合，获得了一种非化学计量LaNi5型储氢合金、用金相、XRD和SEM-EDX等方法分析了该合金的组织结构，研究了合金的气相储氢特性以及电化学性能，结果表明：在1.6MPa氢压和温度29℃下，该合金的储氢量达到1.58%（质量分数），该合金的放电容量为380mAh/g。经300次循环后容量保持率为55%，该合金的基体是CaCu5型结构的LaNi5相，但有第二相（LaMg)Ni3析出，这种第二相的形成是导致该合金大容量的关键。     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

西安脉冲堆计算值和实测结果分析

介绍了西安脉冲堆堆芯布置、计算模型和程序以及计算值与实验测量结果分析。西安脉冲堆在满功率（2MW）下连续运行了72小时，证明西安脉冲堆整个系统和设备是良好的、安全可靠的。根据西安脉冲堆计算值与测量值的比较，证明计算程序可靠，具有较高精度。西安脉冲堆理论计算值与实验测量值符合较好，完全满足工程设计要求，实验测量结果达到了设计指标的要求。