Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.     

SO_4~（2－）／ZrO_2固体超强酸的失活与再生

初步探索了ＳＯ_４~２－／ＺｒＯ２固体超强酸的失活机理．并着重研究了催化剂的两种再生方法：灼烧法和溶剂洗涤法。催化剂主要是因结焦而失活，高温灼烧能基本恢复催化剂原有活性．且再生效果与灼烧温度有关。溶剂洗涤法有一定的再生能力，但不显著．     

工业废渣磷石膏用作充填材料的研究

研制了以工业废渣磷石膏为基材的充填材料.改性后磷石膏的耐水性大大增强,抗压强度≥0.79 MPa、渗透系数≤1×10-5cm.s-1,并且具有合适的C、Φ值.     

Collaborative representation with reduced residual for face recognition

Collaboration representation-based classification (CRC) was proposed as an alternative approach to the sparse representation method with similar efficiency. The CRC is essentially a competition scheme for the training samples to compete with each other in representing the test sample, and the training class with the minimum representation residual from the test sample wins the competition in the classification. However, the representation error is usually calculated based on the Euclidean distance between a test sample and the weighted sum of all the same-class samples. This paper exploits alternative methods of calculating the representation error in the CRC methods to reduce the representation residual in a more optimal way, so that the sample classes compete with each other in a closer range to represent the test sample. A large number of face recognition experiments on three face image databases show that the CRC methods with optimized presentation residual achieve better performance than the original CRC, and the maximum improvement in classification accuracy is up to 12 %.     

酸、碱性条件下茜素红紫外-可见光谱的量子化学研究

茜素红(ARS)是葸醌类化合物中茜草素型的一种,被广泛应用于电化学、光谱学等领域的研究。在酸性溶液中,茜素红主要在260 nm和422 nm处出现明显的吸收峰,而在碱性溶液中吸收峰移动到272 nm和556 nm。为了分析不同溶液环境对茜素红吸收峰波长的影响,本研究在杂化密度泛函方法B3LYP/6-311+(d)水平上优化了ARS分子在酸、碱性情况时的稳定基态构型,并采用含时密度泛函(time-dependent density functional theory,TD-DFT)方法模拟了ARS分子的电子吸收光谱。计算结果与实验得到的紫外可见吸收光谱相吻合,说明密度泛函理论用来研究茜素红的紫外可见光谱是有效可靠的。通过计算还确定了每个吸收峰对应的各个电子跃迁的贡献率以及Mulliken电荷分布。该理论与实验的结合研究为茜草素型化合物的进一步应用、分子设计、药物构效关系和化学反应规律的研究提供了重要的参考依据。     

Synthesis and self-assembly of hyperbranched polyester peripherally modified by touluene-4-sulfonyl groups

In this paper, hyperbranched polyesters (HPs) were synthesized in the molten state from 2,2-bis(hydroxymethyl) propionic acid (bis-MPA) and 2-ethyl-2-hydroxymethyl-1,3-propanediol (TMP) using acid catalysis. The modified hyperbranched polyesters were obtained through the chemical modification of the hyperbranched polyester cores by substituting a controlled fraction of the terminal hydroxyl groups with touluene-4-sulfonyl chloride using triethylamine (TEA) as an acceptor of HCl. The resultant polyesters were characterized by ¹H NMR, ¹³C NMR, FT-IR, UV and GPC and their self-assembly behaviors were investigated. The results revealed that self-assembled structures could be formed in selected solvents (trichloromethane/acetone or trichloromethane/n-hexane).     

Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries

Based on the voltammetric behaviour of a series of methyl-substituted benzenes in 1M LiPF₆/EC-DMC electrolyte, xylene was selected and tested as an electrolyte additive for overcharge protection of Li-ion batteries. From the overcharge curves, CV behaviour and SEM observations of the cells in the presence of xylene, it was found that the additive can polymerize at the overcharged voltage to form a dense layer of isolating polymer film at the cathode surface, which blocks off further oxidation of the electroactive material and electrolyte and, therefore, improves the overcharge tolerance of the Li-ion battery. In addition, the xylene additive has shown only a slight influence on the cycling behaviour.     

K_2O－CaO－Al_2O_3－SiO_2系统自释釉瓷化学组成的研究

本文从酸度系数着手，证实了Ｋ２Ｏ－ＣａＯ－Ａｌ４Ｏ久－ＳｉＯ２系统中存在自释釉组成，限定了其组成范围，０．６７％＜Ｋ２Ｏ＜１．２８％，１０．６４％＜ＣａＯ＜１３．６２％，１１．５３％＜Ａｌ４Ｏ３＜１５．３２％，７２．７３％＜ＳｉＯ２＜７４．０４％，并讨论了自释釉瓷的性能。     

Kinetics for benzoylation of sodium 4-acetylphenoxide via third-liquid phase in the phase-transfer catalysis

In this research, the kinetics for synthesizing 4-acetylphenyl benzoate (R^*COOR) from benzoylation of sodium 4-acetylphenoxide via third-liquid phase-transfer catalysis was investigated. The reaction rate was observed to be strongly dependent on agitation speeds in the third-phase catalytic reaction. By forming the third-liquid phase, the observed reaction can be greatly enhanced to give a product yield of 100% in a duration of 3 min at 20 °C and 200 rpm. If a third-liquid phase was not formed in the liquid–liquid system, the reaction rate is very slow and the product yield is only 2% in 3 min at 20 °C. The reaction conducted in third-liquid phase-transfer catalytic system is faster than that in LLPTC system by 25–28 times. The amount of catalytic intermediate (QOR) in the third-liquid phase was about 50% of the catalyst initially added and kept about 30% of it remained after 1 min, and only small amounts of a catalytic intermediate residing in the organic phase were observed during the reaction using methyl t-butyl ether as the solvent. The concentration of catalytic intermediate slightly decreased with increasing reaction time, while the molar ratio of QOR to benzyl tri-n-butylammonium cation in the third-liquid phase remained almost constant after 1 min and increased with increasing agitation speeds. The experimental results were well described by the pseudo-first-order kinetics. The present work shows an effective method to synthesize 4-acetylphenyl benzoate.     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007