水扬酸镍的合成表征及结构分析

用流变相反应法合成了Ni(OH)Sal·H2 O和Ni2 (OH) 2 Sal2 ·H2 O。通过元素分析、TG、IR、XRD和磁矩对其结构进行了分析。结果表明两个配合物都属于单斜晶系 ,其晶胞参数为 ,Ni(OH)Sal·H2 O∶a =13.1179,b =11.36 41,c =9.5 6 0 5 ,β =92 .96 2 ,V =14 2 3.31(97) 3,Z =7,Dcalcd .=1.885 g/cm3,Dexpt=1.85 8g/cm3;Ni2 (OH) 2 Sal2 ·H2 O :a =13.12 17,b =11.35 80 ,c =9.5 5 2 2 ,β =92 .978 ,V =14 2 1.72 (95 ) 3,Z =4 ,Dcalc=2 .0 73g/cm3,Dexp=2 .0 0 0 g/cm3。     

电凝聚方法处理聚氯乙烯工业废水试验

对电凝聚方法处理聚氯乙烯工业废水的效果及影响因素进行了分析研究。现场运 行结果表明,该方法试验装置对聚氯乙烯废水的处理效果较好,出水水质达到综合排放 标准,对COD,BOD和TSS的去除率分别达到95％,91％和90％;对废水流量负荷的变化 具有较好的适应性,保证出水水质稳定;装置的运行成本经济实用。     

药物中间体2-[(2′-氰基联苯-4-基)甲基氨基]-3-硝苯甲酸乙酯的制备

本文介绍了以3-硝基-2-叔丁氧甲酰氨基苯甲酸乙酯为原料，在碱性条件下与4-(2-氰基苯基)-1-溴甲苯发生亲核取代反应制备2-[(2′-氰基联苯-4-基)甲基氨基]-3-硝苯甲酸乙酯的方法，产品经核磁共振验证其结构，产品收率达83％。本合成工艺条件温和，适合工业化生产。     

Augment low-field intra-operative MRI with preoperative MRI using a hybrid non-rigid registration method

Background

Preoperatively acquired diffusion tensor image (DTI) and blood oxygen level dependent (BOLD) have been proved to be effective in providing more anatomical and functional information; however, the brain deformation induced by brain shift and tumor resection severely impairs the correspondence between the image space and the patient space in image-guided neurosurgery.

Method

To address the brain deformation, we developed a hybrid non-rigid registration method to register high-field preoperative MRI with low-field intra-operative MRI in order to recover the deformation induced by brain shift and tumor resection. The registered DTI and BOLD are fused with low-field intra-operative MRI for image-guided neurosurgery.

Results

The proposed hybrid registration method was evaluated by comparing the landmarks predicted by the hybrid registration method with the landmarks identified in the low-field intra-operative MRI for 10 patients. The prediction error of the hybrid method is 1.92 ± 0.54 mm, and the compensation accuracy is 74.3 ± 5.0%. Compared to the landmarks far from the resection region, those near the resection region demonstrated a higher compensation accuracy (P-value = .003) although these landmarks had larger initial displacements.

Conclusions

The proposed hybrid registration method is able to bring preoperatively acquired BOLD and DTI into the operating room and compensate for the deformation to augment low-field intra-operative MRI with rich anatomical and functional information.     

Security-aware intermediate data placement strategy in scientific cloud workflows

Massive computation power and storage capacity of cloud computing systems allow scientists to deploy data-intensive applications without the infrastructure investment, where large application datasets can be stored in the cloud. Based on the pay-as-you-go model, data placement strategies have been developed to cost-effectively store large volumes of generated datasets in the scientific cloud workflows. As promising as it is, this paradigm also introduces many new challenges for data security when the users outsource sensitive data for sharing on the cloud servers, which are not within the same trusted domain as the data owners. This challenge is further complicated by the security constraints on the potential sensitive data for the scientific workflows in the cloud. To effectively address this problem, we propose a security-aware intermediate data placement strategy. First, we build a security overhead model to reasonably measure the security overheads incurred by the sensitive data. Second, we develop a data placement strategy to dynamically place the intermediate data for the scientific workflows. Finally, our experimental results show that our strategy can effectively improve the intermediate data security while ensuring the data transfer time during the execution of scientific workflows.     

异常高压气井生产动态仿真研究及应用

异常高压气井生产动态仿真方法不仅改变了传统物理仿真成本高、过程复杂的缺点,而且具备了计算机仿真模拟的准确性。考虑异常高压气井流体高压、高温的特点,本文将异常高压气井生产压降分解为地层流动压降、井筒流动压降和嘴流流动压降三个过程,并建立了气井生产动态流动数学模型;本文利用计算机仿真技术模拟了异常高压气井地层流体流动过程、井筒流体流动过程和气嘴流体流动过程,并预测了气井生产动态流动参数,为下步异常高压气井动态配产提供了基础数据。通过实例分析,将计算机仿真预测出的异常高压气井流动参数代入优化配产模型计算出配产结果与实际配产结果十分接近,表明异常高压气井生产动态仿真对实际生产具有重要的指导意义。     

胶粘耐磨涂层的制备与抗冲蚀磨损性能研究

研制了一种应用于水力机械元件和设备的抗冲蚀磨损的胶粘耐磨涂层。分析了涂层的制备工艺，检测了涂层的各项性能，研究了耐磨涂层的抗冲蚀磨损性能。研究发现：底部涂层与基体间的相互吸附、涂层间的相互扩散、偶联剂的共价键连接和机械互锁，均能使涂层与涂层之间、底层与基体之间在界面处形成牢固结合，有利于提高耐磨涂层的整体抗冲蚀磨损性能。     

催化分馏塔塔顶冷凝系统改造

对催化分馏塔顶冷凝系统存在的问题进行了分析，提出优化流程，应用表面蒸发式空冷器替代干湿联合式空冷器的改造方案，并设计实施，取得满意效果。     

一种基于ARM的集中器的硬件实现

介绍了一种以ARM9为核心,以Windows CE5.0为操作系统的集中器。它符合国家电网的Q/GDW 374.2-2009技术标准,可以在国家电网中使用。给出了集中器的系统框图,介绍了集中器的主要实现电路,论述了其主要工作原理。