Machining accuracy for shearing process of thin-sheet metals—Development of initial tool position adjustment system

In the shearing process, clearance has a significant effect on machining accuracy. However, the relationship between uneven clearance caused by misalignment of tool position and machining accuracy remains unclear. This is attributed to the fact that, previously, the effect was small because the thickness of the workpiece was not so thin, and a method for precisely measuring and adjusting the tool position had not been established. Therefore, in the present study, a new method of adjusting the initial tool position is developed. In addition, punching experiments are conducted under the condition that the initial tool position is adjusted to an accuracy of 2 μm or better, and the effects of clearance on machining accuracy, shape of cross-section, and diameter of hole, are investigated in three types of materials. From these results, the importance of adjusting the initial tool position is clarified.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Template‐Free Fabrication of Mesoporous Alumina Nanospheres Using Post‐Synthesis Water‐Ethanol Treatment of Monodispersed Aluminium Glycerate Nanospheres for Molybdenum Adsorption

This work reports the template‐free fabrication of mesoporous Al₂O₃ nanospheres with greatly enhanced textural characteristics through a newly developed post‐synthesis “water‐ethanol” treatment of aluminium glycerate nanospheres followed by high temperature calcination. The proposed “water‐ethanol” treatment is highly advantageous as the resulting mesoporous Al₂O₃ nanospheres exhibit 2–4 times higher surface area (up to 251 m² g^?1), narrower pore size distribution, and significantly lower crystallization temperature than those obtained without any post‐synthesis treatment. To demonstrate the generality of the proposed strategy, a nearly identical post‐synthesis “water treatment” method is successfully used to prepare mesoporous monometallic (e.g., manganese oxide (MnO₂)) and bimetallic oxide (e.g., CuCo₂O₄ and MnCo₂O₄) nanospheres assembled of nanosheets or nanoplates with highly enhanced textural characteristics from the corresponding monometallic and bimetallic glycerate nanospheres, respectively. When evaluated as molybdenum (Mo) adsorbents for potential use in molybdenum‐99/technetium‐99m (⁹⁹Mo/^99mTc) generators, the treated mesoporous Al₂O₃ nanospheres display higher molybdenum adsorption performance than non‐treated Al₂O₃ nanospheres and commercial Al₂O₃, thereby suggesting the effectiveness of the proposed strategy for improving the functional performance of oxide materials. It is expected that the proposed method can be utilized to prepare other mesoporous metal oxides with enhanced textural characteristics and functional performance.     

A 78-year-old man with young onset parkinsonism and sudden death

We report a right-handed 78-year-old man with early onset parkinsonism. The patient had an onset of micrographia at 23 years of the age in 1939. Seven years later he started to drag his right foot, and at 38 years of age, he walked with small steps with festination. Tremor was also present in his right hand. His daily life was independent as a otorhinolaryngologist. He visited our clinic on March 24, 1977 when he was mentally sound and showed mild parkinsonism consisting of masked face, stooped posture, small step gait, bradykinesia, and right side dominant rigidity and tremor. He showed good response to trihexyphenidyl and amantadine HCl. Two month later, he developed dyskinesia and some worsening of parkinsonism, and was admitted to our hospital for the first time. He was treated with 400 to 600 mg/day of levodopa/ carbidopa. He showed marked improvement, however, dyskinesia remained in his mouth. He was doing well until 77 years of age (June of 1993) when he developed hallucination and motor fluctuations. He was admitted again to our hospital on June 22, 1993. On admission, he was alert and appeared mentally sound. However, Hasegawa dementia scale was 18/30. Upward gaze was slightly restricted (3/5). Voice was somewhat small but no masking was noted. His posture was stooped and the gait was of small step. Dyskinesia was noted during walk. No rigidity nor tremor was noted. Deep tendon reflexes were lost but no sensory loss or motor weakness was noted. Routine laboratory studies were unremarkable. A cranial CT scan revealed only mild to moderate cortical atrophy. Motor and sensory conduction velocities were within normal limits, however, motor action potentials could not be obtained with stimulation to the right common peroneal nerve. He was treated with 600 mg/day of levodopa with carbidopa, 100 mg of amantadine HCl, 300 mg of Dops, and 25 mg of tiapride. He continued to show motor fluctuations, and was discharged on July 23, 1993. Since then his motor functions had become progressively worse with frequent falls, but he was still able to walk without support. On October 3 of 1994, he went to bed as usual. On the next morning, he was found dead in his bed at 9: 30. The patient was discussed in neurological CPC, and the chief discussant arrived at the conclusion that the patient had young-onset Parkinson's disease with Lewy bodies in the substantia nigra. Opinions were divided between Parkinson's disease and Lewy body negative young onset parkinsonism. Postmortem examination revealed obstruction of the trachea by aspirated foods, and the cause of death appeared to have been suffocation by the foods. Macroscopically, the external appearance of the brain was unremarkable except for slight frontal atrophy. The substantia nigra showed depigmentation in the lateral part, but the pigmentation of the medial part was well preserved. Upon histologic examination, the number of pigmented neurons in the dorsomedial part was well preserved. In the lateral part, pigmented neurons were well preserved in the dorsal area, however, in the ventral area, only non-pigmented neurons were seen; they appeared to be neurons in the pars reticulata. No gliosis was seen in any of the nigral areas. No Lewy bodies were seen in the remaining neurons. So-called immature neurons with rounded shape without neuromelanin could not be detected. The locus coeruleus neurons were well preserved. The putamen and the other basal ganglia structures were also intact. Slight myelin pallor was noted in the subcortical white matter, however, otherwise cerebral cortices were normal. The histology of this patient is unique in that only the ventrolateral part of the substantia nigra showed abnormal finding consisting of lack of pigmented neurons without gliosis. It is not clear whether the nigral change represents degeneration or a congenital "hypoplasia'. To our knowledge, such a unique pathology of the substantia nigra has not been reported in the literature. Our patient ma     

Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

High-performance cone beam reconstruction using CUDA compatible GPUs

Compute unified device architecture (CUDA) is a software development platform that allows us to run C-like programs on the nVIDIA graphics processing unit (GPU). This paper presents an acceleration method for cone beam reconstruction using CUDA compatible GPUs. The proposed method accelerates the Feldkamp, Davis, and Kress (FDK) algorithm using three techniques: (1) off-chip memory access reduction for saving the memory bandwidth; (2) loop unrolling for hiding the memory latency; and (3) multithreading for exploiting multiple GPUs. We describe how these techniques can be incorporated into the reconstruction code. We also show an analytical model to understand the reconstruction performance on multi-GPU environments. Experimental results show that the proposed method runs at 83% of the theoretical memory bandwidth, achieving a throughput of 64.3 projections per second (pps) for reconstruction of 512³-voxel volume from 360 512²-pixel projections. This performance is 41% higher than the previous CUDA-based method and is 24 times faster than a CPU-based method optimized by vector intrinsics. Some detailed analyses are also presented to understand how effectively the acceleration techniques increase the reconstruction performance of a naive method. We also demonstrate out-of-core reconstruction for large-scale datasets, up to 1024³-voxel volume.     

Visual simulation of mixed-motion avalanches with interactions between snow layers

In the field of computer graphics, simulation of fluids, including avalanches, is an important research topic. In this paper, we propose a method to simulate a kind of avalanche, mixed-motion avalanche, which is usually large and travels down the slope fast, often resulting in impressive visual effects. The mixed-motion avalanche consists of snow smokes and liquefied snow which form an upper suspension layer and a lower dense-flow layer, respectively. The mixed-motion avalanche travels down the surface of the snow-covered mountain, which is called accumulated snow layer. We simulate a mixed-motion avalanche taking into account these three snow layers. We simulate the suspension layer using a grid-based approach, the dense-flow and accumulated snow layer using a particle-based approach. An important contribution of our method is an interaction model between these snow layers that enables us to obtain the characteristic motions of avalanches, such as the generation of the snow smoke from the head of the avalanche.     

An Algorithm for Minimum Cost Arc-Connectivity Orientations

Given a 2k-edge-connected undirected graph, we consider to find a minimum cost orientation that yields a k-arc-connected directed graph. This minimum cost k-arc-connected orientation problem is a special case of the submodular flow problem. Frank (1982) devised a combinatorial algorithm that solves the problem in O(k ² n ³ m) time, where n and m are the numbers of vertices and edges, respectively. Gabow (1995) improved Frank’s algorithm to run in O(kn ² m) time by introducing a new sophisticated data structure. We describe an algorithm that runs in O(k ³ n ³+kn ² m) time without using sophisticated data structures. In addition, we present an application of the algorithm to find a shortest dijoin in O(n ² m) time, which matches the current best bound.     

Discharge properties and chemical stability of SrZrO films

Abstract— MgO thin film is currently used as a surface protective layer for dielectric materials because MgO has a high resistance during ion sputtering and exhibits effective secondary electron emission. The secondary‐electron‐emission coefficient γ of MgO is high for Ne ions; however, it is low for Xe ions. The Xe content of the discharge gas of PDPs needs to be raised in order to increase the luminous efficiency. Thus, the development of high‐γ materials replacing MgO is required. The discharge properties and chemical surface stability of SrO containing Zr (SrZrO) as the candidate high‐γ protective layer for noble PDPs have been characterized. SrZrO films have superior chemical stability, especially the resistance to carbonation because of the existence of a few adsorption sites due to their amorphous structure. The firing voltage is 60 V lower than that of MgO films for a discharge gas of Ne/Xe = 85/15 at 60 kPa.