L波段微波功率合成技术研究

无人机机载功率放大器的性能一直是限制无人机技术发展的主要因素,为此提出了将功率合成技术应用于无人机数据系统的方法解决上述问题。利用微带线技术结合系统性的电路调试方法,辅以Advanced Design System仿真软件优化设计,同时采用实频技术法进行宽带功放设计,成功研制了频段在1.3 GHz~1.7 GHz的功率放大器,单路功率放大器采用级联的技术输出功率为8 W,两路合成后,实测总输出功率为15.67 W,合成效率达97%,性能稳定,达到实用水平。     

Pure spatial rich model features for digital image steganalysis

The SRM (Spatial Rich Model) is a very effective steganalysis method. It uses statistics of neighboring noise residual samples as features to capture the dependency changes caused by embedding. Because the noise residuals are the high-frequency components of image and closely tied to image content, the residuals of different types of image regions have different statistical properties and effectiveness for steganalysis. In this paper, the effectiveness of the residuals is investigated. Then the effectiveness of the statistics collected from different types of neighboring residual samples is investigated from the FLD (Fisher Linear Discriminant) viewpoint, and ineffective, effective and high-effective neighboring residual samples are defined. The ineffective neighboring residual samples are not likely to change during embedding, and if they are counted in statistics, they may mix the features with noise and make the features impure. Pure SRM features are extracted based on neighboring noise residual sample selection strategy. Furthermore, multi-order statistical features are proposed to increase the statistical diversity. Steganalysis performances of the statistical features collected from different types of neighboring residual samples are investigated on three content adaptive steganographic algorithms. Experimental results demonstrate that the proposed method can achieve a more accurate detection than SRM.     

Secure three-party computational protocols for triangle area

In this work, we have put forth two different protocols to address a concrete secure multi-party computational (MPC) problem related to a triangle, of which the coordinates of the three vertices are confidentially kept by the three participants, respectively. The three parties wish to collaboratively compute the area of this triangle while preserving their own coordinate privacy. As one of the merits, our protocols employ weaker assumptions of the existence of pseudorandom generators. In particular, unlike massive secure MPC protocols that rely a lot on oblivious transfer, ours utilize a new computing idea called “pseudorandom-then-rounding” method to avoid this burdensome obstacle. The two protocols are based on different theorems, while they both make use of the same underlying idea. At last, we provide a detailed proof for the first protocol by a series of security reductions of our newly defined games, which seems somewhat stronger than the previous simulation-based proofs and a proof sketch for the second one. Analysis and discussion about the reasons are provided as well to round off our work.     

现代商业区建筑供配电设计要点及对策初论

在经济的推动下,商业区数量日益增多,空间布局更加紧凑,用电量也随之大幅增加,管理更为困难。因此,要重视商业区建筑的供电配电。介绍了商业区建筑的特点,然后结合实际案例对其供配电进行了设计。     

Effect of Ce(3+) on soluble microbial products production in anaerobic granular sludge digestion

Upflow anaerobic sludge bed reactors fed on glucose were used to investigate the effects of Ce(3+) on soluble microbial products (SMP) production, which is the majority of the residual chemical oxygen demand present in the effluent. It was found that Ce(3+) concentration of 0.05 mg/L had no significant effect on the amount of SMP production, whereas that of 1 mg/L led to the increase in SMP production. The molecular-weight distribution and carbohydrate analysis indicated that an increase in SMP production may be partly attributed to the release of extracellular polymeric substances (EPS) into the bulk solution resulted from cerium toxicity, and the nucleic acids analysis suggested that increased cell lysis also contributed to SMP accumulation in the presence of Ce(3+). The increase in SMP production in the presence of Ce(3+) is possibly a consequence of the release of EPS and increased cell lysis due to cerium toxicity.     

资水梯级电站施工期闸孔通航方式工程实践

有通航要求的水利水电工程施工期通航问题,是施工导流设计和工程实施期间需要妥善解决的问题之一。以资水柘溪电站以下河段修建的修山水电站、东坪水电站和株溪口水电站工程为例,介绍了施工期利用工程既有的闸孔通航并取得较好技术经济效果的实际做法。工程实践表明,利用闸孔通航,技术上是可行的,并具有导流程序简单、施工期通航工程措施费用低、电站发电时间可提前等优点,经济效益显著。其工程经验可在类似工程中推广应用。     

生态承载力理论在流域水电梯级开发规划环评中的应用

通过建立流域生态承载力指标体系,确定指标权重及评价标准,构建了流域水电梯级开发规划环境影响评价的生态承载力计量模型,并以贵州省坝王河流域为例,对不同规划方案情景下的流域生态环境影响进行了评价.结果表明:评价的5个方案(包括零方案)情景中,规划的4个方案情景下的坝王河流域生态承载力指数(水平)均较零方案情景高,其中方案4...     

强腐蚀环境下锚索强度指标及表观特性试验研究

利用自行制做的试验装置,以配制出的强腐蚀环境土为介质,对非预应力锚索和预应力锚索的裸筋以及对有注浆缺陷的锚索试件进行了腐蚀试验,从外观腐蚀状况和腐蚀后的钢绞线力学性能的改变特性进行了研究.结果表明:从外观上看,预应力锚索试件的腐蚀程度总体上比非预应力试件的腐蚀程度要重,含注浆缺陷的锚索试件的腐蚀程度比裸筋的腐蚀程度要重...