一种基于像素自适应仲裁的OSD分层混合结构设计

数据混合是OSD分层显示的关键技术之一.本文基于OSD的分层结构及数据组织结构特点,提出一种OSD分层显示的单混合结构,该结构采用基于像素自适应仲裁的策略,按照层优先级次序,对多个OSD图层信号实时地切换显示.FPGA验证结果表明,该结构在满足OSD分层混合显示、实现菜单选择鼠标控制等高级人机对话功能的前提下,其硬件资源开销比多混合结构节省约33%以上,且具有良好的层次可扩展性和操作灵活性.     

Non-invasive headspace measurement for characterizing oxygen-scavenging in polymers

A non-invasive headspace analysis method to measure rate and amount of oxygen uptake in oxygen-scavenging polymers is presented. Oxygen uptake data for metal-catalyzed poly(1,4-butadiene) at 30 °C are provided to illustrate the method. These data were obtained by measuring oxygen headspace concentration above the scavenging polymer with an OxySense^® 200T non-invasive oxygen sensor, and, for comparison, oxygen uptake was measured with an analytical balance. Excellent agreement was observed between these two independent experiments.     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

DH-2催化剂在尿素装置脱氢反应器的应用

简要介绍了塔西南化肥厂尿素原料气脱氢系统工艺,改用国产DH-2催化剂对系统进行的改进及实际应用情况.对国产催化剂应用前后的工艺情况--脱氢效果、反应器压差及床温进行了分析、评价,认为:用该催化剂取代进口催化剂是成功的,完全能满足工艺要求.     

智能数显仪在生产中的应用

利用智能数显仪的万能输入、变送输出和控制输出功能,不仅可以实现加热站采暖温度根据大气温度自动调节的方案,而且通过改进可以实现硝酸透平压缩机轴位移联锁控制和应用于制作栲胶溶液槽上的液面计.     

种分Δα_k与精液Al_2O_3浓度的关系

对烧结法和拜尔法种分槽的Δαk 变化进行了概述 ,阐述了精液Al2 O3 浓度关系到晶种分解的产出率、分解率、氢氧化铝粒度及系统的液量平衡、能耗等 ,生产中要把握这些影响因素 ,确保氢氧化铝晶体的长大速度为正值。     

江苏复杂断块高含水单元改善水驱效果的技术对策

在分析高含水开发单元特点的基础上,针对该阶段剩余油的品位、分布和油水关系极为复杂、挖潜难度大的技术难点,提出了适合江苏复杂断块油田高含水开发单元改善水驱开发效果的思路和工作程序、技术对策,并在真武油田高含水开发单元进行了实际应用,取得了良好的效果.