智能数显仪在生产中的应用

利用智能数显仪的万能输入、变送输出和控制输出功能,不仅可以实现加热站采暖温度根据大气温度自动调节的方案,而且通过改进可以实现硝酸透平压缩机轴位移联锁控制和应用于制作栲胶溶液槽上的液面计.     

种分Δα_k与精液Al_2O_3浓度的关系

对烧结法和拜尔法种分槽的Δαk 变化进行了概述 ,阐述了精液Al2 O3 浓度关系到晶种分解的产出率、分解率、氢氧化铝粒度及系统的液量平衡、能耗等 ,生产中要把握这些影响因素 ,确保氢氧化铝晶体的长大速度为正值。     

江苏复杂断块高含水单元改善水驱效果的技术对策

在分析高含水开发单元特点的基础上,针对该阶段剩余油的品位、分布和油水关系极为复杂、挖潜难度大的技术难点,提出了适合江苏复杂断块油田高含水开发单元改善水驱开发效果的思路和工作程序、技术对策,并在真武油田高含水开发单元进行了实际应用,取得了良好的效果.     

A Parallel Deadlock Detection Algorithm with O(1) Overall Run-time Complexity

This article proposes a novel parallel, hardware-oriented deadlock detection algorithm for multiprocessor system-on-chips. The proposed algorithm takes full advantage of hardware parallelism in computation and maintains information needed by deadlock detection through classifying all resource allocation events and performing class specific operations, which together make the overall run-time complexity of the new method O(1). We implement the proposed algorithm in Verilog HDL and demonstrate in the simulation that each algorithm invocation takes at most four clock cycles in hardware.     

90平米开启住宅新时代

大力发展90平米以下中小套型住宅，不仅具有重大的现实意义，而且将对我国住宅建设的发展产生深远的影响。[编者按]     

A Newly Developed Non, Destructive Tritium Measurement Technique and Its Application to V-4Cr-4Ti Alloy

A non-destructive and in-situ technique for the measurement of tritium in materials, namely β-ray-induced X-ray spectrometry （BIXS）, has been developed recently. In the present study a V-4Cr-4Ti alloy was pre-heated at 1000℃ for 2 h to form a recrystallization structure before the tritium absorption experiments were conducted. Firstly the hydrogen isotope gas was charazterized by means of a quadrupole mass spectrometer （QMS） and a small-sized ionization chamber. Then hydrogen isotope absorption tests of V-4Cr-4Ti alloy were performed at 400 ℃ and the atomic concentration of hydrogen isotope in V-4Cr-4Ti alloy was estimated as 0.17% with a tritium content of approximately 2.5 ppm. Experimental results indicate that BIXS is a quite useful tool for quantitatively measuring the tritium content and tritium distribution in the surface layers of vanadium alloys and no strong trapping effects of tritium exist in the pre-heated V-4Cr-4Ti alloy.     

The oxidation of two ternary Ni-Cu-10 at.% Al alloys in 1 atm of pure O2 at 800-900 °C

The oxidation of the ternary alloys Ni-45Cu-10Al and Ni-30Cu-10Al has been studied at 800-900 °C under 1 atm O₂. The presence of 10 at.% Al reduces significantly the oxidation rate of the corresponding Cu-Ni alloys during the initial oxidation stages, even before the establishment of a complete Al₂O₃ layer. The weight of individual sample of the two ternary Ni-Cu-10Al alloys at 800 °C increases more rapidly than at 900 °C during the initial oxidation stage. As oxidation proceeds, the weight gain at 800 °C slows down to a degree that the total weight gain after 24 h oxidation at 800 °C is less than that at 900 °C. Due to a faster formation of the Al₂O₃ layer, which suppresses earlier the further oxidation of Cu and Ni, the external region of the scales grown on Ni-45Cu-10Al contain much less Cu and Ni oxides than those grown on Ni-30Cu-10Al. The transition from the internal oxidation to the selective external oxidation of the most reactive component Al in Ni-Cu-Al alloys is favored by higher values of the Al content, of temperature and of the Cu/Ni ratio.