OFDM系统中同步算法的FPGA 实现

给出了一种用于 OFDM 系统中可同时完成帧起始位置估计和载波频偏估计／补偿的同步算法及其 FPGA 实现方法。采用量化的方法对该不需要额外同步序列的估计算法进行了改进,提高了载波频偏的估计精度,并在数字域进行了频偏校正。在硬件实现上,利用 CORDIC 算法能够有效计算三角函数的特点,把频偏估计和频偏校正过程中的反正切运算和角度旋转操作转化成加法和移位操作,实现了计算精度、运算速度和硬件资源利用三方面性能的兼顾。     

光电对抗仿真试验系统综述

论述了研制光电对抗仿真试验系统建设的目的和意义,光电武器系统的现状和发展趋势,介绍了光电对抗仿真试验系统的一般组成,给出了光电武器系统的常规试验内容和试验流程,并论述了可能采用的试验方法。     

Pack cementation process for the formation of refractory metal modified aluminide coatings on nickel-base superalloys

The vapour phase compositions of a series of pack powder mixtures containing elemental Al and Hf or W powders as depositing sources and CrCl₃·6H₂O or AlF₃or CrF₃as activators were analysed in an attempt to further develop the pack cementation process to codeposit Al and Hf or W to form diffusion coatings on nickel base superalloys. The results suggested that Al could be codeposited with Hf, but not with W, from the vapour phase. Compared with both AlF₃and CrF₃, CrCl₃·6H₂O has been shown to be a more suitable activator for codepositing Al with Hf. The optimum coating temperature was identified to be in the range of 1050°C to 1150°C. Based on the thermochemical analysis, a series of coating deposition studies were undertaken, which confirmed that codeposition of Al and Hf could be achieved at a deposition temperature of 1100°C in the CrCl₃·6H₂O activated packs containing elemental Al and Hf powders. The coating obtained had a multilayer structure consisting of a Ni₇Hf₆Al₁₆top layer and a NiAl layer underneath, followed by a diffusion zone, which revealed that the coating was formed by the outward Ni diffusion. It is suggested that the compositions suitable for codeposition of Al and Hf could be effectively identified by comparing the vapour pressures of HfCl₄and HfCl₃with that of AlCl in the packs activated by chloride salts. It has also been experimentally demonstrated that, although W could not be deposited from the vapour phase, a high volume of fine W particles can be entrapped into the outer NiAl coating layer formed by the outward Ni diffusion using a modified pack configuration. This leads to the formation of a composite coating layer with W particles evenly distributed in a matrix of NiAl. It is suggested that this modified pack process could be similarly applied to develop nickel aluminide coatings containing other refractory metals that may not be codeposited with Al from the vapour phase.     

移动网络中的独立式安全管理系统

本文提出一种适用于移动网络的安全管理系统,由于访问网络能够独立地对漫游用户进行认证,所以称该系统为独立式安全管理(ISM).基于ISM设计一种漫游用户的认证协议,通过对协议的比较分析可以看出,相对于其它安全管理系统,ISM的突出优点是安全责任划分清晰、认证效率高.     

吐哈盆地巴喀油田特低渗砂岩油层裂缝分布特征

巴喀油田中侏罗统砂岩属特低渗透裂缝 孔隙型储集层 ,平均渗透率为 0 .3× 10 - 3μm2 ;地下基质岩块孔隙度为7.4%,渗透率为 0 .16× 10 - 3μm2 。砂岩储集层发育的主要裂缝类型有构造层理缝、正向正交缝、斜向正交缝和羽裂等 ,裂缝宽度一般为 0 .3～ 3 .2mm ,纵向切深为 0 .1～ 0 .8m ,水平延伸长度为 0 .2～ 2 .1m。裂缝以半充填为主 ,其分布受岩性、层厚和构造位置的影响 ,纵向、横向均呈带状分布 ,被裂缝切割而成的基质岩块尺寸取决于裂缝频率 ,岩块长轴方向以北西西向为主 ,与构造轴向基本一致。图 3表 4参 8     

层序单元体系域划分及勘探意义

体系域是层序地层学理论体系中的重要概念，在隐蔽油气藏的勘探中，勘探家们极为重视低位体系域。但体系域的成因意义、是否有不同级别层序的体系域以及如何划分，在实际工作中认识不一致。结合勃海湾盆地的勘探实例，分析体系域的成因机制、组合特征和勘探规律，认为：体系域是基准面变化等因素作用的产物，不同级别的层序都发育着与其对应的体系域：一般情况下，三级层序对应的体系域单元与含油气层的规模相匹配，但四级层序对应的体系域才是隐蔽油气藏赋存的有利部位。图5参6。     

龙滩水电站地下厂房进水口高边坡加固支护设计

龙滩水电站地下厂房进水口高边坡开挖坡高达435m，坡面面积达27万m^2，为典型的反倾向层状结构岩质高边坡。为了确保进水口坝段的稳定，必须保持边坡岩体有足够的稳定性，通过采取边坡轮廓设计，防渗、排水设计，加固支护设计及施工控制等一系列措施，确保边坡稳定。文章简要论述了边坡设计的原则、标准、高边坡轮廓设计、防渗排水系统、加固支护措施、施工控制等情况。     

Breaking a remote user authentication scheme for multi-server architecture

Lin et al., (2003) proposed a remote user authentication scheme for multi-server architecture. In this paper, we breaks this scheme by giving an attack. Our attack allows an adversary to impersonate any user in the system, as long as a single authentication message of that user is observed.     

浅谈我国电信企业市场营销策略

随着电信全球化发展的新趋势，国际竞争愈演愈烈，我国电信业面临更严峻的挑战，根据我国电信企业的行业特点，提出了全员营销、摒弃传统广告宣传方式、营建全新企业文化及拓宽范围，实行差别化经营等策略。     

TEM Studies of High Temperature Corrosion Behaviour of TiAl Intermetallics with Surface Modifications

The oxidation/sulphidation behaviour of a Ti‐46.7Al‐1.9W‐0.5Si alloy with a TiAl₃ diffusion coating was studied in an environment of H₂/H₂S/H₂O at 850^oC. The kinetic results demonstrate that the TiAl₃ coating significantly increased the high temperature corrosion resistance of Ti‐46.7Al‐1.9W‐0.5Si. The SEM, EDX, XRD and TEM analysis reveals that the formation of an Al₂O₃ scale on the surface of the TiAl₃‐coated sample was responsible for the enhancement of the corroison resistance. The Ti‐46.7Al‐1.9W‐0.5Si alloy was also modified by Nb ion implantation. The Nb ion implanted and as received sampels were subjected to cyclic oxidation in an open air at 800^oC. The Nb ion implantation not only increased the oxidation resistance but also substantially improved the adhesion of scale to the substrate.