CFRP加固钢筋混凝土梁滞后应变计算方法

为了系统研究从零负载状态到满负载状态各个阶段CFRP片材加固梁滞后应变的计算方法,在充分考虑加固梁不同负载状态及受压区混凝土非线性本构关系的基础上,分别建立了不同负载贴片加固梁考虑混凝土抗拉作用时的滞后应变计算公式及不考虑混凝土抗拉作用时的简化计算公式.试验数据和对比分析结果表明:"考虑混凝土抗拉作用"公式的计算结果与试验数据吻合良好,计算误差<8%,明显优于现有文献的计算方法;"不考虑受拉区混凝土抗拉作用"公式的计算结果在混凝土开裂前和试验值相差较大,但对已裂加固梁的计算误差与"考虑混凝土抗拉作用"公式的计算误差接近.为简化计算,对未裂和已裂混凝土梁贴片加固时的滞后应变可分别采用"换算截面"公式和"不考虑混凝土抗拉作用"公式进行计算,两种简化方法的误差均不会超过10%.     

四叔丁基萘酞菁氧钒非线性及光限幅特性

为提高酞菁化合物的非线性光学性能,以1,8-二氮杂双环[5.4.0]十一碳烯-7(DBU)为催化剂,采用液相法合成了四叔丁基萘酞菁氧钒((t-Bu)4NcVO)化合物.利用元素分析、红外光谱、核磁共振氢谱方法,验证了化合物的分子结构.应用调Q倍频ns/ps Nd∶YAG脉冲激光系统,在波长为532nm下,研究了化合物的非线性和光限幅特性.测得化合物的非线性折射率n2和三阶非线性极化率χ(3)分别为2.51×10-11esu和8.54×10-12esu,通过计算得到分子极化率γ’为3.7×10-29esu.在透过率69%时限幅阈值为1608mJ/cm2,箝位值为585mJ/cm2,有效激发态与基态吸收截面比为3.66.     

Effect of puerarin on the P13K pathway for glucose transportation and insulin signal transduction in adipocytes

To explore the effect of puerarin on insulin receptor (IR), insulin receptor substrate-1 (IRS-1) and protein expression of protein kinase B(PKB) in the P13K pathway of the glucose consumption, transportation and insulin signal transduction in 3T3-L1 adipocytes with insulin resistance. The insulin resistance 3T3-L1 adipocytes model was established by free fatty acid induction. The model cells were managed with puerarin in different concentrations. Glucose consumption was detected with glucose oxidase method, glucose transportation rate was determined by 2-deoxy-3H glucose ingesting method, and the IR, IRS-1 and PKB expression were determined by Western blot. Glucose consumption and transportation were significantly decreased in the model adipocytes, but increased after treated with puerarin (P<0.01). Moreover, the level of tyrosine phosphorylation of IR subunit β was higher in the puerarin treated groups, and that of IRS-1 was higher in the group treated with low dose puerarin than that in the model group. The 3T3-L1 adipocytes of insulin resistance model could be induced by free fatty acid successfully, puerarin could promote the glucose utilization in them to alleviate the insulin resistance, which may be related with the action in advancing the tyrosine phosphorylation of IR and IRS-1.     

Characterization of NOM and THM formation potential in eutrophic reservoir water

Resin adsorption technique with XAD-8 and XAD-4 was used to characterize the raw water from Erlong reservoir in Jilin province of China. The NOM chemical composition sequences of four organic fractions in the raw water,from high to low,are fulvic acid (FA) fraction,hydrophilic non-acid (HPINA) fraction,hydrophilic acid (HPIA) fraction,and humic acid (HA) fraction. Experimental results show that FA is the main precursor of THMFP among the four organic fractions. However,HA or hydrophobic acid exhibits the highest chlorination activity in forming THMs. It is also found that the value of FI/DOC or SUVA and the specific THMFP have better positive correlation. It is implied that certain source water has unique nature of NOM and DBPs.     

考虑冷变形加工硬化的翻边力理论计算

在分析现有计算公式存在不足的基础上,根据翻边变形区材料的应力应变特点,考虑了冷变形加工硬化(取幂函数硬化规律)和变形区材料厚度变化(翻边为变薄)两个因素的影响,利用金属塑性成形问题求解理论中的主应力法,推导和提出了圆孔翻边力计算的一个新公式.通过用钢板(SPCC)和铜板(T1)进行了翻边工艺试验的验证,并与经验公式和现有理论公式的计算结果进行了比较,表明新公式计算结果能接近于实际,且原理上更为科学合理.     

Relation between structural evolution of the Longmenshan orogenic zone and sedimentation of its foreland basin

In order to determine the area for oil and gas exploration in China's north Sichuan basin, we have divided the time during which the Longmenshan foreland basin was formed into five periods, based on the sedimentary response relationship of the fore-land basin to structural evolution: 1) a late Triassic Noric period; 2) an early-Middle Jurassic period; 3) a late Jurassic to early Cre-taceous period; 4) a late Cretaceous to Paleogene-Neogene period and 5) the Quaternary period. As well, we analyzed the sedimen-tary environment and lithologic features of every basin-forming period. The results show that there are several favorable source-reservoir-cap assemblages in our study area, making it a major region for future oil and gas exploration in China's northern Sichuan basin.     

数控加工三维场景几何建模技术研究

讨论了基于构件技术的数控加工三维场景建模技术,并以OpenGL和Visual C++6.0为开发平台,开发出一个基于STL文件格式的建模系统.     

我国南方农村生活污水处理技术的研发现状

针对农村生活污水直接排放已经成为影响我国农村水环境质量主要因素之一的现状,从适合我国农村的以村落或居民点为单位进行生活污水分散式处理的思维入手,介绍了我国现今主要的分散式生活污水处理技术的原理、特点、不足及其应用现状;继而综合比较了这些技术的技术经济指标,提出了适合我国农村的分散式生活污水处理技术的设计原则;最后提出发展有较高水力负荷,并具备小规模设备化特征和多种生物处理单元复合的创新技术是我国农村生活污水处理技术发展的主要方向。     

触觉设计在盲人产品开发中的应用

对于视觉障碍人士而言,产品的使用过程中,触觉是居于听觉以外最重要的通道,通过分析触觉设计的特性以及盲人的生理和心理需求,从盲人产品的舒适性、形态和材料等方面进行研究,首先利用触觉设计在塑造形态上发挥的主要功能和辅助功能,对形态进行设计;其次利用材料本身的物质性肌理,肌理来塑造产品的触感,达到产品与盲人心理沟通的效果.     

Moodle在中澳合作办学项目中的应用

Moodle以其经济性和易用性等特点,已在教育领域中得到广泛应用。浙江科技学院在中澳合作办学项目中,基于Moodle的网络教学平台成了联系中澳双方的纽带,为双方教师及学生参与各种教学活动提供了有效的途径。在分析了Moodle课程管理系统的特点和主要功能模块之后,介绍了Moodle在项目中的实际应用情况,指出了在使用这个教学平台过程中存在的不足。