含淀粉聚乙烯膜的时控光降解研究

使用复合光降解剂，得到了可光降解的生物降解膜。对膜的光降解进行了考察，并对影响光降解的因素进行了讨论，结果表明，我们所制得的膜是一种较好的时控光降解膜。     

交流探尺的控制及其在武钢新3^#高炉上的应用

本文论述了交流探尺的控制原理及到料面信号的检测方法。以其在武钢新３＃高炉上的应用为例，给出系统组态、控制框图及它在无料钟系统中所起的补偿倾动角度的作用。最后对交流、直流探尺系统进行了比较。     

Correlation study on infrared thermography and nerve root signs in lumbar intervertebral disk herniation patient: a short report

OBJECTIVE: To determine whether infrared skin thermography is an objective measurement reflecting the seriousness of nerve root irritation in lumbar disk herniation patients. DESIGN: Quantified nerve root signs by physical examination were collected from the patients along with the infrared skin temperature measurement on the lumbosacral region and posterior part of thighs. A correlation study was applied to observe the relation between the nerve root signs and the skin temperature before a successful conservative treatment (mainly spine manipulation), and between the alteration of nerve root signs and that of skin temperature after the treatment. SETTING: Hospitalized care. PATIENTS: Twenty-seven hospitalized samples with computed tomography or magnetic resonance approval were consecutively selected during the latter half of 1990. MAIN OUTCOME MEASURE: Changes in nerve root signs. RESULTS: The temperature difference between a troubled thigh and healthy one is significantly correlated to the score of the nerve root signs before the treatment; and the reduction of temperature difference between two thighs is also significantly correlated with decreasing score of nerve root signs after the treatment. The correlation between the temperature difference on the left and right sides of the lumbosacral region and the nerve root signs before the treatment is insignificant; and the variation of the temperature difference of the same region after the treatment is not correlated with the decreasing score of the nerve root signs. CONCLUSION: Infrared skin thermography of lower extremities might be an objective sign in signaling the soothing process of the nerve root irritation in lumbar disk herniation patients, which may help a doctor in checking the responses of the patient to treatment.     

用基团贡献法预测纯物质蒸气压

对应状态原理与基团贡献法结合，提出一个新的蒸气压估算方程（ＲＬＹＭ）。通过对烷烃、烯烃、炔烃、环烷烃、环烯烃、醇、环醇、酮、醚、芳烃、酚、萘在内的１７４种有机物质蒸气压实验数据的关联，获得了３０种基团的贡献参数值。新模型的预测精度优于现有的对应状态法，并且对高碳分子仍有较好的估算精度。总的关联误差小于１．１７％。     

半连续式棒材轧机在线捆扎机及其工艺设置

由北京冶金设备制造厂设计的YSK6型钢丝捆扎机，共设有并列6台棒材捆扎车，每台捆扎车由中间收送机、成形捆扎机、液压装置、捆扎辊道和台车组合而成。按生产工艺参数要求，整个成型捆扎周期为30秒。捆扎后的棒材在成品称重时用电子秤，每称量一次均可打印出单次净值、累加值和累加次数值。     

三辊穿孔和轧管所产生的钢管壁厚极差和波浪形内螺纹

定量描述了实际生产过程中三辊斜轧穿孔所产生的钢管壁厚极差和波浪形内螺纹，初步探讨了三辊轧管机对钢管壁厚极差和波浪形内螺纹的影响。     

Use of Explosives on The Moon

The utilization of explosives for excavation on the lunar surface is under serious consideration as a part of the design for construction of temporary and permanent bases. An excavation research program has shown that small‐scale explosives blasting in a lunar‐soil simulant will greatly reduce the digging forces required for scoop and dragline excavators. Some crater‐blasting parameters were determined for the lunar soil simulant at one Earth gravity and at 10 Earth gravities using a centrifuge. The size of the craters produced at 10 Earth gs matched those formed at one earth g by scaling according to the weight of the explosive. These data can be applied to explosive‐excavation problems such as habitat construction, burial of nuclear power sources, and the rapid construction of shelters remote from the main base to shield against solar‐flare activity.     

微机控制托辊管筒加工机床的设计

介绍了一种生产效率高、加工质量稳定、利用单片机控制液压传动系列带式输送机托辊管筒自动加工机床的设计过程。     

降凝剂对高蜡稠油的改性效果及机理研究

实验研究了工业品原油降凝剂WHP改善含蜡56.9%、其中96.6%为正构烷烃的胜利郑王庄稠油流动性的效果。WHP含乙烯/醋酸乙烯/乙烯醇嵌段聚醚三元共聚物30%-35%。在60℃将WHP加入稠油中,测定其凝点和32℃、0-42.6 s^-1范围5个剪切速率下的黏度,均随WHP加量的增加（50-300 mg/L）而降低,200 mg/L为最佳加量,在该加量下0.32 s^-1黏度由34.16 Pa·s降至79.2 mPa·s,凝点（℃）、屈服值（Pa）、稠度系数（Pa·s^n）分别由49.0、32.42、31.57降至39.5、0.1297、0.02142,流型指数由0.1176升至0.9790。由黏温曲线求出,加入200mg/L WHP使该稠油析蜡点由65℃降至58℃,反常点由70℃降至50℃。根据空白和加剂原油扫描电镜照片显示的蜡晶形态,利用共晶机理分析讨论了WHP这种高分子表面活性剂的降凝、降黏、改善流动性的作用。图3表3参5。