加强业余党课学习小组建设的必要性

在高校党团组织的领导下，通过不断地实践探索，业余党课学习小组得到发展壮大。业余党课学习小组在团的建设、学生教育以及发展学生党员等工作中发挥着重要的作用。     

含氟聚酰亚胺的辐射交联及其交联度的XPS表征

含氟聚酰亚胺(FPI)是一种耐高温、耐水解的新型聚酰亚胺。到目前为止,尚未见文献报道它的辐射交联。本文发现它能在高温辐射下交联,交联后的含氟聚酰亚胺的玻璃化转变温度以及高温力学性能有明显提高。本文还首次用XPS方法做了它的交联度表征。用XPS方法求得FPI的凝胶化剂量为50Mrad。     

On the loading criteria in the theory of plasticity

The conventional loading criterion in the theory of plasticity becomes ambiguous when it is applied to materials that exhibit straining softening. For instance, it can not differentiate the softening behavior from the unloading process. On the other hand, the loading criterion proposed recently by Qu and Yin is free from such problems, and is more suitable for a general elasto-plastic analysis by finite element method. In the first part of this paper the proposed loading criterion is first reviewed and discussed to highlight the difficulties associated with the inequality conditions used in the conventional as well as the proposed loading criteria. This paper then proceeds to discuss the proposed criterion and reveals its implications. Although the proposed inequality conditions are not generally known in the field, it is found that they are essential and significant in the theory of plasticity.     

Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator     

智能小区中的网络和布线设计解决方案——智能建筑学术讨论系列文章之七

当前小区信息网络建设中存在多种实施方案。笔者分析比较了常用的几种典型方案的优劣。讨论了目前建设中的一些解决方法，提出了兼顾现状，适度超前的设计实施原则。     

Combined shape and sizing optimization of truss structures

 In this paper, an evolutionary optimization method is presented for weight minimum problem of a 3-dimensional truss structure in terms of nodal coordinates and element cross-sectional areas. The structure is subject to stress, local buckling and displacement constraints. Two types of design variables with different natures are optimized separately: (1) a fully stressed design (FSD) and scaling techniques are applied to sizing variables and (2) the evolutionary node shift method is applied to shape variables. Alternating procedure is utilized to couple the two types of variables and to combine the results. The optimum solution is achieved gradually from the initial configuration design. Two typical truss structures are examined to illustrate the validity of the method. Received: 22 October 2001 / Accepted: 04 June 2002 This research work is supported by the National Natural Science Foundation of China under the guarantees no. 10072050 and 10172072, respectively.