基于L2触发的异构网络切换研究

IETF提议的MIPv6协议能够实现异构网络切换,但切换时延和丢包率较大,其扩展协议FMIPv6为此提出L2触发的概念,却未定义L2触发的具体时间。因此,结合IEEE802.21媒体独立切换(MIH)协议提出一种基于L2触发的异构网络切换方案,通过NS-2仿真验证了L2触发的切换方案能有效减少切换时延和丢包,并评价了不同速度、不同预测系数对切换期间的中断概率、丢包率和网络使用率的影响。     

Impact of DEM accuracy and resolution on topographic indices

Topography is an important land-surface characteristic that affects most aspects of the water balance in a catchment, including the generation of surface and sub-surface runoff; the flow paths followed by water as it moves down and through hillslopes and the rate of water movement. All of the spatially explicit fully distributed hydraulic and hydrological models use topography (represented by the DEM of the area modelled) to derive bathymetry. DEM is also used to derive some other key information critical in fully distributed hydraulic and hydrological models.With high-resolution DEMs such as LiDAR (Light Detection and Ranging) becoming more readily available and also with the advancements in computing facilities which can handle these large data sets, there is a need to quantify the impact of using different resolution DEMs (e.g. 1 m against 10 m or 25 m) on hydrologically important variables and the loss of accuracy and reliability of the results as we move from high resolution to coarser resolution.The results from statistical analysis carried out to compare field survey elevations with the LiDAR DEM-derived elevations, show that there are small differences between the two data sets but LiDAR DEM is a reasonably good representation of the actual ground surface compared to other commonly used DEMs derived from contour maps.The results from the analysis clearly show that the accuracy and resolution of the input DEM have serious implications on the values of the hydrologically important spatial indices derived from the DEM. The result also indicates that the loss of details by re-sampling the higher resolution DEM to coarser resolution are much less compared to the details captured in the commonly available coarse resolution DEM derived from contour maps. Topographic indices based on contour derived DEMs should be used with caution and where available, the higher resolution DEM should be used instead of the coarse resolution one.     

Globally Exponential Stability for Delayed Neural Networks Under Impulsive Control

In this paper, the dynamic behaviors of a class of neural networks with time-varying delays are investigated. Some less weak sufficient conditions based on p-norm and ∞-norm are obtained to guarantee the existence, uniqueness of the equilibrium point for the addressed neural networks without impulsive control by applying homeomorphism theory. And then, by utilizing inequality technique, Lyapunov functional method and the analysis method, some new and useful criteria of the globally exponential stability with respect to the equilibrium point under impulsive control we assumed are derived based on p-norm and ∞-norm, respectively. Finally, an example with simulation is given to show the effectiveness of the obtained results.     

Fire detection based on hidden Markov models

In this paper, a novel method of real-time fire detection based on HMMs is presented. First, we present an analysis of fire characteristics that provides evidence supporting the use of HMMs to detect fire; second, we propose an algorithm for detecting candidate fire pixels that entails the detection of moving pixels, fire-color inspection, and pixels clustering. The main contribution of this paper is the establishment and application of a hidden Markov fire model by combining the state transition between fire and non-fire with fire motion information to reduce data redundancy. The final decision is based on this model which includes training and application; the training provides parameters for the HMM application. The experimental results show that the method provides both a high detection rate and a low false alarm rate. Furthermore, real-time detection has been effectively realized via the learned parameters of the HMM, since the most time-consuming components such as HMM training are performed off-line.     

一种低功耗集中供热实时温度采集系统设计

从系统性能,运行效率和经济效益等方面出发,设计出一种低功耗的多路温度采集与实时检测系统,既可为供热部门提供实际温度参数,合理调度锅炉运行时间,降低能耗;又可以为监管部门提供可靠的供热质量信息,方便协调和管理,化解供需的矛盾。具有较好的经济效益和社会效益。     

基于ARM的消防设备无线联网终端硬件设计

信息网络化的社会,消防报警设备的网络化是大势所趋。为了不浪费现行的消防联动设备资源,研究设计出一套基于ARM的硬件平台,集成了无线通信模块和图像采集模块。采用低成本硬件,达到系统功能要求。     

路径规划算法的改进及在车载导航中的应用

路径规划算法是车载导航的核心问题。充分利用启发式搜索具有方向性的启发信息,对A＊算法进行改进,采用双向的A＊算法来避免过多的节点搜索和搜索过界,不能得到正确结果的问题。同时,为了适合嵌入式平台的特殊环境,采用数据分层,搜索过程升层的方法,充分利用内存资源,减少外存I/O的工作量。并且结合上述策略,给出了改进的算法伪代码流程并对改进的A＊算法的进行验证。     

ETM+和ASTER数据在遥感信息提取中的对比研究

遥感蚀变信息提取是找矿的一个重要技术手段。本文选择位于秘鲁南部阿雷基帕(AREQUIPA)省境内的萨卡纳(CERCANA)和伊卡(ICA)省境内的Moarcona铁矿区作为本文的两个研究区,从分析地物光谱出发,利用ETM+和ASTER卫星影像数据,通过主成份分析法和比值分析法分别对两个研究区进行泥化蚀变信息提取和铁染蚀变信息提取,并对两者的提取结果进行对比分析。最后结果表明,相较于ETM+数据,ASTER数据在矿化蚀变信息的提取方面具有更大的优势。     

基于PID反馈的高Q值加速度计闭环检测电路

高Q值加速度计由于能够很好地降低热机械布朗噪声,被广泛应用于高精度低噪声检测领域,相应的闭环接口电路却成为其应用的困难之一.通过分析传感器的器件结构和动态响应,提出了一种基于PID反馈的闭环检测电路来克服传感器因高Q值造成的不利影响,改善系统的频率特性和动态响应.根据设计原理设计和测试了基于PCB板级的闭环检测电路.电...     

Continuous and impulsive vaccination of SEIR epidemic models with saturation incidence rates

In this paper, two delayed SEIR epidemic models with continuous and impulsive vaccination and saturating incidence are investigated. The dynamical behaviors of the disease are analyzed. For continuous vaccination, we obtain a basic reproductive number _R1$R_1$ and prove that if _R1≤1$R_1\le 1$ then the disease-free equilibrium is globally attractive and if _R1>1$R_1>1$ then the disease is permanent by using the Lyapunov functional method. For impulsive vaccination, we obtain two thresholds R^∗$R^{\ast }$ and _R∗$R_{\ast }$ and prove that if R^∗<1$R^{\ast }<1$ then the disease-free periodic solution is globally attractive and if _R∗>1$R_{\ast }>1$ then the disease is permanent by using the comparison theorem of impulsive differential equation and the Lyapunov functional method. Lastly, we compared the effects of two vaccination strategies.