黑旺铁矿锚链主机基础开挖中的控制爆破

通过合理地选用控爆参数、起爆工艺并采取加强防护等措施，在爆破环境复杂的条件下，将爆破震动、飞石等的危害严格地控制在允许范围内，保证了爆区周围人与物的安全。     

Numerical simulation of aerosol collection in filters with staggered parallel rectangular fibres

 In this paper, filters with rectangular fibres arranged in a staggered and parallel array and placed transverse to the flow are studied numerically. A two- dimensional flow field is obtained by solving Navier–Stokes equations with the control volume method. Periodic boundary conditions are introduced in the calculation. In order to achieve higher accuracy, a second-order upwind scheme is adopted and a fine mesh is arranged near the fibre and the symmetrical plane of the flow field where large gradients in velocity are expected. Particle trajectories are calculated by solving the corresponding Lagrangian equation of motion to obtain the collection efficiency of a single rectangular fibre, in which positions of the approaching particles on the inlet plane of the flow field are randomly distributed according to the Monte-Carlo principle. The simulation considers all the important mechanisms of particle capture including interception, inertial impaction and Brownian motion. Effects of fibre aspect ratio, filter packing density, particulate size and Reynolds number on the collection efficiency are numerically determined. The volumetric packing density ranges from 0.4 to 4% and the particle diameter is from 0.01 μm to 2 μm. Reynolds number based on the height of computational domain varies from 20 to 100 and the aspect ratio is from 0.1 to 10. Simulations with and without Brownian motion are carried out for different Reynolds numbers, packing densities and aspect ratios and the results show that Brownian effects are significant for particles smaller than 1 μm. Received 25 May 2001     

一种快速的海面特征SAR成像仿真技术

水下物体运动引起扰动，会在海面产生尾迹。这种尾迹特征同运动物体的参数和下潜的深度以及海况有关。研究这种尾迹特征及其合成孔径雷达(SAR)成像，就有可能利用SAR来检测这个水下运动物体。本文给出了一种水下运动物体的伴流尾迹的快速模拟方法及其合成孔径雷达(SAR)成像仿真方法，并对模拟仿真的结果进行了讨论。     

Atmospheric and low pressure shadow masked MOVPE growth of InGaAs(P)/InP and (In)GaAs/(Al)GaAs heterostructures and quantum wells

The shadow masked growth technique is presented as a tool to achieve thickness and bandgap variations laterally over the substrate during metalorganic vapor phase epitaxy. Lateral thickness and bandgap variations are very important for the fabrication of photonic integrated circuits, where several passive and active optical components need to be integrated on the same substrate. Several aspects of the shadow masked growth are characterized for InP based materials as well as for GaAs based materials. Thickness reductions are studied as a function of the mask dimensions, the reactor pressure, the orientation of the masked channels and the undercutting of the mask. The thickness reduction is strongly influenced by the mask dimensions and the reactor pressure, while the influence of the orientation of the channels and the amount of undercutting is only significant for narrow mask windows. During shadow masked growth, there are not only thickness variations but also compositional variations. Therefore, we studied the changes in In/Ga and As/P ratios for InGaAs and InGaAsP layers. It appears that mainly the In/Ga-ratio is responsible for compositional changes and that the As/P-ratio remains unchanged during shadow masked growth.     

对我国酱油酿造几项新技术应用之浅见

本文概述了三十年来我国酿造酱油工业开展研究的六项新技术在现阶段的投产可行性，及进一步研究方向的看法。     

A Method of Combined SHPB Technique and BP Neural Network to Study Impact Response of Materials

Abstract:  A new method combining the split Hopkinson pressure bar (SHPB) technique with the back-propagation (BP) neural network program is proposed. By this method, the treated strain wave signals become smooth with less noises induced by the transverse inertia. Moreover, the dynamic rate-dependent constitutive behaviour of materials can be identified, without any pre-assumption of a constitutive model. It is found that by taking the experimentally measured data of strain, strain rate and time as 'input' and the corresponding data of stress as 'output' of the BP neural network, the dynamic constitutive behaviour with internal damage or phase transformation evolution is easy to be identified, where the time could represent either the internal damage evolution or phase transformation process accompanied with the deformation process. It is emphasised that the data learnt by the BP neural network must include both loading and unloading processes, if the whole loading and unloading response is to be correctly predicted. The comparisons between the predictions and experimental results are in good agreement for both polyamide (PA) polymer (as an example of nonlinear viscoelastic materials) and Ti–Ni alloy (as an example of superelastic materials with stress-induced phase transformation).     

Side-Track Erasure Processes in Perpendicular Recording

In perpendicular recording, substantial erasure of the stored data patterns can occur during the writing process. Among all those erasure processes, side-track erasure (STE) is one of the critical issues in drive head/media integration. Unlike the adjacent track erasure (ATE) process, the locations of the STE affected areas are often many tens of tracks away from the central writing track location. In this work, we report on an experimental investigation and quantification of the general attributes and the origins of the STE processes in various situations. Particularly, we thoroughly characterize some distinctive signatures and behaviors of STE processes by employing both the amplitude- and bit-error-rate-based STE measurement methods in combination with a novel magnetic force microscope characterization technique     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

Microwave heating synthesis of HgS and PbS nanocrystals in ethanol solvent

A novel route was developed to prepare PbS and HgS nanocrystals in ethanol solvent in the presence of sodium hydroxide by microwave heating method. PbS and HgS nanocrystals were obtained with an average size of approximately 10 and 6 nm, respectively. In the reaction, mercury acetate and lead acetate were used as mercury and lead source; sulfur powder was employed as chalcogenide source. The products were characterized by X-ray powder analysis (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV–Vis absorption spectroscopy. The probable mechanism was presented.     

丙烯酸酯与甲基丙烯酸酯的共聚及性能研究

采用悬浮聚合法，以丙烯酸－２－乙基－己酯与甲基丙烯酸十二酯为单体，合成了共聚型高吸油性树脂。研究了共聚单体的配比、交联剂用量、引发剂用量诸因素对高吸油性树脂的性能影响。制得的树脂可以吸其自身质量的１１．８倍的煤油、１４．７倍的苯、６．５倍的泵油。