嵌入式软件GUI自动化测试平台研究

为实现嵌入式软件的GUI自动化测试,对嵌入式软件GUI自动化测试现状深入分析,提出了一种无侵入式的GUI自动化测试框架,利用图像采集与信息识别技术实现测试用例结果判断;利用键盘鼠标模拟技术模拟测试用例执行的人机交互;利用脚本语言嵌入技术实现用例编辑与转换、利用嵌入式软件GUI测试自动化控制技术实现用例的自动驱动与执行;在此基础上,设计并研发了嵌入式软件GUI自动化测试平台,能够方便、有效地实现无侵入式的嵌入式GUI自动化测试.     

用于腺苷检测的基于级联扩增核酸适体电化学传感界面的构建研究

该文报道了一种基于酶级联扩增的电化学核酸适体检测腺苷的新方法。当腺苷存在时,滚环扩增的引物通过E.coli DNA连接酶的作用与通过巯基组装在金电极上的固定探针连接。在pHi29 DNA聚合酶的作用下,滚环扩增反应进行并产生一条与环形探针完全互补的长的单链,然后将大量金纳米粒子标记的核酸探针与滚环扩增的产物杂交。该传感界面电化学行为的结果表明,通过酶级联扩增的方法提高了检测腺苷的阻抗响应灵敏度,且选择性和重现性良好。用于腺苷的检测时,其线性范围为2.0μmol/L~100μmol/L,最低检测浓度为2.0μmol/L,表明该传感界面的设计可作为一种通用方法而有望用于其它目标物的检测。     

基于FPGA＋DSP的跳频电台传输系统

高速率跳频、高带宽技术是提高跳频发射机性能的关键,本文结合软件无线电思想和架构,提出一种基于FPGA＋DSP的跳频电台传输系统的设计方案,该系统兼容多种调制方式和跳频速率及数码率。系统采用上下变频器作为系统基带信号与中频信号之间的频率转换器,还给出了系统电路原理图和程序流程图。     

IT时代的第三种文化产业机遇

人类社会一直存在着并行不悖的科技与人文的两种文化与文化产业。如今,出现了第三种文化与第三种文化产业。第三种文化产业的思想基础是图灵的可计算原理;其物质基础是微处理器智力内核。第三种文化产业将打破两种文化产业界线,用人工智能与智能化工具等现代科技手段,实现人文文化领域中的艺术创作,这是人类文化领域中已经开始的没有硝烟的产业战争。     

直流电机的角位移伺服控制系统研究

本文介绍一种以STM32微控制器作为控制核心的直流电机角位移伺服控制系统。系统以光电编码器为角位移传感器,还具有基于PWM和H桥的电机驱动电路,并通过数字PID控制策略,实现基于直流电机的角位移控制。实际测试表明,系统具有控制精确、稳定性好和结构简单等特点。     

海量数据处理器MPC860T的DSP阵列设计

现代通信的数据量日益增加,数据处理的复杂度也日益加强,如何有效处理这些海量数据,是目前研究的难点,基于DSP阵列的数据处理系统是解决这些问题的有效方法。本文选用TI公司的TMS320C6713浮点型数字信号处理器以及Freescale公司的MPC860T通用通信处理器,设计了16颗浮点型DSP阵列来完成海量数据实时处理。详细介绍了该系统的DSP阵列的管理,包括复位、HPI数据管理通道设计。通过测试和实际应用验证,该系统不仅满足性能上的要求,还是一个通用的数据采集和处理平台。     

Adaptive detection of range-spread targets without secondary data in multichannel autoregressive process

Adaptive detection of range-spread targets without secondary data is addressed in a multichannel autoregressive Gaussian disturbance with unknown space–time covariance matrix, by utilizing the Rao test. The proposed Rao test without secondary data is theoretically proved to be asymptotically (large-sample in the number of temporal observations) constant false alarm rate with respect to unknown space–time covariance matrix, thanks to an asymptotic equivalence between the Rao test and the generalized likelihood ratio test. Moreover, the performance loss due to no secondary data can be remedied by appropriately increasing the temporal dimension. The performance assessment conducted by Monte Carlo simulation, also in comparison with the existing detector without secondary data, confirms the effectiveness of the proposed detectors.     

Sampling average approximation method for a class of stochastic Nash equilibrium problems

We consider a class of stochastic Nash equilibrium problems (SNEP). Under some mild conditions, we reformulate the SNEP as a stochastic mixed complementarity problem (SMCP). We apply the well-known sample average approximation (SAA) method to solve the SMCP. We further introduce a semismooth Newton method to solve the SAA problems. The comprehensive convergence analysis is given as well. In addition, we demonstrate the proposed approach on a stochastic Nash equilibrium model in the wholesale gas–oil markets.     

On the Accuracy of Packet Delay Estimation in Distributed Service Networks

Packet delay (either one-way time or round-trip time) is a very important metric for measuring the performance of networks in a highly dynamic environment such as the Internet. Many network applications are also sensitive to packet delay or delay variation for ensuring an acceptable level of quality in providing network-based services such as VoIP, multimedia streaming, etc. A very important property of packet delay is that it is very dynamic and therefore should be measured frequently with measurement results being updated on a timely basis. Measurement of packet delay has thus generated a great deal of interest in the past years and a lot of research has been performed in the development of measurement architecture as well as specific measurement techniques. However, how to reduce network overhead resulting from measurement while achieving a reasonable level of accuracy still remains a challenge. In this paper, we propose to use delay estimation as an alternative to delay measurement for reducing measurement overhead and, in particular, examine the level of accuracy that delay estimation can achieve. With delay estimation, measurement nodes can be dynamically selected and activated and other nodes can share measurement results by performing delay estimation, thus reducing measurement overhead while supporting the dynamic requirement for delay measurement. Consequently, while measurement overhead can be reduced by activating only a subset of network nodes to perform actual measurement, desired accuracy can be achieved by exploring the correlation between delays as well as by sharing measurement results to do delay estimation based on such a correlation. We illustrate how packet delays of network nodes can correlate to each other based on topological properties and show how delays can be estimated based on such a correlation to meet accuracy requirements, which would make delay measurement in the Internet highly dynamic and adaptable to the accuracy requirements and measurement results highly reliable. We also show how delay estimation can be applied by presenting three application scenarios as well as an example to demonstrate the usefulness and effectiveness of delay estimation in the measurement of packet delays.