Use of different barium salts to inhibit the thaumasite form of sulfate attack in cement-based materials

We investigated the effects of different barium compounds on the thaumasite form of sulphate attack(TSA)resistance of cement-based materials when they were used as admixtures in mortars.Moreover,we analyzed the inhibition mechanisms within different types of barium salts,namely BaCO_3 and Ba(OH)_2,on the thaumasite formation.The controlcement mortar and mortars with barium salts to cement and limestone weight ratios of 0.5%,1.0%,and 1.5% were immersed in 5%(by weight)MgSO_4 solution at 5 ℃ to mimic TSA.Appearance,mass,and compressive strength of the mortar samples were monitored and measured to assess the generaldegradation extent of these samples.The products of sulphate attack were further analyzed by XRD,FTIR,and SEM,respectively.Experimentalresults show that different degradation extent is evident in allmortars cured in MgSO_4 solution.However,barium salts can greatly inhibit such degradation.Barium in hydroxide form has better effectiveness in protection against TSA than carbonate form,which may be due to their solubility difference in alkaline cement pore solution,and the presence of these barium compounds can reduce the degree of TSA by comparison with the almost completely decomposed controlsamples.     

Controllable preparation and superior rate performance of spinel LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> hollow microspheres as cathode material for lithium-ion batteries

Spinel LiMn₂O₄ microspheres and hollow microspheres with adjustable wall thickness have been prepared using controllable oxidation of MnCO₃ microspheres precursors and following solid reactions with lithium salts. Scanning electron microscopy (SEM) investigations demonstrate that the microsphere morphology and hollow structure of precursors are inherited. The effect of hollow structure properties of as-prepared LiMn₂O₄ on their performance as cathode materials for lithium-ion batteries has been studied. Electrochemical performance tests show that LiMn₂O₄ hollow microspheres with small wall thickness exhibit both superior rate capability and better cycle performance than LiMn₂O₄ solid microspheres and LiMn₂O₄ hollow microspheres with thick wall. The LiMn₂O₄ hollow microspheres with thin wall have discharge capacity of 132.7 mA·h·g^-1 at C/10 (14.8 mA·g^-1) in the first cycle, 94.1% capacity retention at C/10 after 40 cycles and discharge capacity of 116.5 mAh·g^-1 at a high rate of 5C. The apparent lithium-ion diffusion coefficient (D _app) of as-prepared LiMn₂O₄ determined by capacity intermittent titration technique (CITT) varies from 10^-11 to 10^-8.5 cm²·s^-1 showing a regular “W” shape curve plotted with test voltages. The Dapp of LiMn₂O₄ hollow microspheres with thin wall has the largest value among all the prepared samples. Both the superior rate capability and cycle stability of LiMn₂O₄ hollow microspheres with thin wall can be ascribed to the facile ion diffusion in the hollow structures and the robust of hollow structures during repeated cycling.     

<Emphasis Type="Italic">Ab initio</Emphasis> study of doping mechanisms in BaTiO<Subscript>3</Subscript>-BiYO<Subscript>3</Subscript>

A density functional plane-wave pseudopotential method is used to study the doping mechanisms of impurity defects(Bi_Ba, Y_Ti) in BaTiO₃-BiYO₃. Single Bi_Ba and Y_Ti impurities have little structure distortion. Bi forms ionic bond with nearby O atom in single Bi impurity, Y formed [YO₆] octahedral in single Y impurity. However, in the co-doped Bi_Ba and Y_Ti structure, Bi formed three valence bonds with nearby O atom, which causes the large structure distortion. The doped ion makes the mobile of Ti⁴⁺ difficult and loss local ferroelectricity, which will broaden the dielectric constant temperature curve and increase the temperature stability of BaTiO₃ ceramic matrix.     

Effect of pore structures on the electrochemical performance of porous silicon synthesized from magnesiothermic reduction of biosilica

Two kinds of porous silicon(PS) were synthesized by magnesiothermic reduction of rice husk silica(RHS) derived from the oxidization of rice husks(RHs). One was obtained from oxidization/reduction at 500 ℃ of the unleached RHs, the other was synthesized from oxidization/reduction at 650 ℃ of the acidleached RHs. The structural difference of the above PS was compared: the former had a high pore volume(PV, 0.31 cm3/g) and a large specific surface area(SSA, 45.2 m~2/g), 138 % and 17 % higher than the latter, respectively. As anode materials for lithium ion batteries, the former had reversible capacity of 1 400.7 m Ah/g, 987 m Ah/g lower than the latter; however, after 50 cycles, the former had 64.5 % capacity retention(907 m Ah/g), which was 41.2 % higher than the latter(555.7 m Ah/g). These results showed that the electrochemical performance of PS was significantly affected by its pore structures, and low reduction temperature played the key role in increasing its porosity, and therefore improving its cycling performance.     

飞翼布局无人机滑跑纠偏控制

针对滑跑纠偏控制律对良好鲁棒性的要求,以及飞翼布局无人机地面滑跑六自由度模型非线性、多变量的特点,提出了基于自抗扰控制理论的无人机非线性滑跑纠偏控制律;由于采用了前轮转向、阻力方向舵和主轮差动刹车联合纠偏,针对控制执行机构纠偏效率在滑跑过程中变化较大,以及阻力方向舵和刹车机构兼具减速和纠偏功能的特点,提出采用加权伪逆法对偏航力矩及阻力控制指令进行动态控制分配。结果表明,自抗扰滑跑纠偏控制律能够能有效观测并补偿跑道环境影响造成的强烈干扰及侧风干扰,加权伪逆法能够对偏航力矩和阻力指令进行动态分配,并使各执行机构使用量处于正常范围以内。     

Influence of deposition pressure on properties of ZnO: Al films fabricated by RF magnetron sputtering

Transparent conductive aluminum doped zinc oxide(ZnO:Al,AZO) films were prepared on glass substrates by rf(radio frequency) magnetron sputtering from ZnO: 3wt% Al_2O_3 ceramic target. The effect of argon gas pressure(PAr) was investigated with small variations to understand the influence on the electrical, optical and structural properties of the films. Structural examinations using X-ray diffraction(XRD) and scanning electron microscopy(SEM) showed that the ZnO:Al thin films were(002) oriented. The resistivity values were measured by four-point probe with the lowest resistivity of 5.76×10~(-4) Ω?cm(sheet resistance=9.6 Ω/sq. for a thickness=600 nm) obtained at the PAr of 0.3 Pa. The transmittance was achieved from ultravioletvisible(UV-VIS) spectrophotometer, 84% higher than that in the visible region for all AZO thin films. The properties of deposited thin films showed a significant dependence on the PAr.     

Synthesis,characterization and thermal stability of CeO<Subscript>2</Subscript> stabilized ZrO<Subscript>2</Subscript> ultra fine nanoparticles via a sol-gel route

CeO₂ stabilized ZrO₂ ultra fine nanoparticles were successfully synthesized via a simple and effective sol-gel synthetic approach by using zirconylchloride octahydrate, cerium nitrate hexahydrate, and citric acid as starting materials. A series of techniques, including X-ray diffraction (XRD), thermogravimetry (TG), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and N₂-sorption analysis, were used to characterize the structure and morphology of the as-prepared samples. XRD studies indicate that the as-synthesized sample is of well crystallized tetragonal phase of CeO₂ stabilized ZrO₂ with high purity. TEM images show that the as-synthesized sample is composed of a large number of fine dispersive nanoparticles with an average size about 10 nm. The as-synthesized tetragonal CeO₂ stabilized ZrO₂ sample was heated at different temperatures in order to evaluate its thermal stability. The exprimental results reveal that the as-synthesized tetragonal CeO₂ stabilized ZrO₂ sample exhibits excellent stability without the occurrence of phase transformation.     

Aging behaviors of silicone rubber composite materials under outdoor environment

We investigated the aging effect on the chemical structure of silicone rubber composite materials under outdoor environment. The variations of low molecular weight siloxanes in silicone rubber were probed by gas chromatography-mass spectrometry during the degradation process. The experimental results indicate that a series of cyclic siloxanes exist in both the virgin and aged silicone rubber samples, while the additional low molecular weight siloxanes (hexamethyl cyclotrisiloxane) only appear in the aged samples. Meanwhile, the total amounts of low molecular weight siloxanes in the aged samples are much less than those in the virgin ones. The loss of low molecular weight siloxanes is induced by the chain scission and depolymerization.     

Mechanical properties and microstructure of Portland cement concrete prepared with coral reef sand

The feasibility of using coral reef sand (CRS) in Portland cement concrete is investigated by testing the mechanical property and microstructure of concrete. The composition, structure and properties of the CRS are analyzed. Mechanical properties and microstructure of concrete with CRS are studied and compared to concrete with natural river sand. The relationship between the microstructure and performance of CRS concrete is established. The CRS has a porous surface with high water intake capacity, which contributes to the mechanical properties of concrete. The interfacial transition zone between the cement paste and CRS is densified compared to normal concrete with river sand. Hydration products form in the pore space of CRS and interlock with the matrix of cement paste, which increases the strength. The total porosity of concrete prepared with CRS is higher than that with natural sand. The main difference in pore size distribution is the fraction of fine pores in the range of 100 nm.     

Effect of corrosive solutions on C-S-H microstructure in portland cement paste with fly ash

By means of ²⁹Si and ²⁷Al magic angle spinning nuclear magnetic resonance (MAS NMR) combined with deconvolution technique, X-ray diffraction (XRD), scanning electron microscopy (SEM) as well as energy dispersive X-ray system(EDX), the effect of 5 wt% corrosive solutions (viz. 5 wt% Na₂SO₄, MgSO₄, Na2SO4+NaCl and Na₂SO₄+NaCl+Na₂CO₃) on C-S-H microstructure in Portland cement containing 30 wt% fly ash was investigated.The results show that, in MgSO₄ solution, Mg²⁺ promotes the decalcification of C-S-H by SO ₄ ^2- ,increasing silicate tetrahedra polymerization and mean chain length (MCL) of C-S-H. However, the substituting degree of Al³⁺ for Si⁴⁺ (Al[4]/Si) in the paste does not change evidently. Effect of Na²SO⁴ solution on C-S-H is not significantly influenced by NaCl solution, while the MCL and Al[4]/Si of C-S-H in fly ashcement paste slightly change. However, the decalcification of C-S-H by SO ₄ ^2- and CO ₃ ^2- attack, as well as the activation of fly ash by SO ₄ ^2- attack will increase the MCL and Al[4]/Si, which are both higher than that under Na₂SO₄ corrosion, MgSO₄ or Na₂SO₄ +NaCl coordination corrosion.