橡胶缓冲块压铸模的设计与制造

分析了橡胶缓冲块零件的结构及工艺要求，介绍了橡胶缓冲块压铸模的设计特点及制造工艺。     

有扰对称信道平均信息量的计算

照相手机让诺基亚抢了风头，这真是亚洲人的失策。在日本和韩国，内置摄像头的手机早就不是什么值得炫耀的东西了。不过日本人的动作还是很快的，GD88和N8一副后来居上的架势，让人不敢小瞧。     

码头建筑物对水位影响的模型试验及计算方法

河岸码头建筑物势必导致其上游水位壅高及对码头附近水流流态产生影响。以汉江沙洋河段为对象 ,通过定床概化物理模型试验研究了码头建筑物对河道水位与流速场的影响。并基于能量平衡原理 ,采用河道恒定非均匀流水面曲线基本方程 ,结合物理模型试验资料 ,计算了码头建筑物附近的水位变化值 ,并提出了码头建筑物产生的水位壅高值的计算方法。     

纯镍材料焊接工艺优化

1　引言纯镍是在工业生产中各种苛刻腐蚀环境下采用的金属材料。鉴于石油化工生产过程中高温、高压和介质强腐蚀性的特点 ,石油化工装置设备选材的要求很高 ,烧碱装置的关键设备碱蒸发器就是采用纯镍制造的。我国石化行业烧碱装置的碱蒸发器过去基本是随装置从国外引进的 ,近年来 ,该设备已初步进行国产化。由于碱蒸发器的制造涉及到纯镍材料的焊接 ,因此 ,如何对纯镍材料进行焊接工艺优化 ,成为保证设备制造质量的关键。由于纯镍材料本身固有的物理、化学特性 ,在焊接过程中极易出现裂纹、气孔及晶粒粗大等缺陷 ,严重影响到设备的制造质量…     

宽带抽运情况下乙醇、丙酮溶液中受激拉曼散射光谱的实验研究

研究了乙醇、丙酮两种拉曼介质在宽带抽运情况下啁啾激光脉冲的受激拉曼散射频谱特性 ,得到的一级Stokes光频谱宽度与抽运光基本相当 ,且具有较高的转换效率 ,从而表明了利用“展宽—受激拉曼散射—压缩”的办法获得波长近 1μm的飞秒级超短脉冲激光信号源的实验方案具有可行性     

Modeling of the bulk free radical polymerization up to high conversion—three stage polymerization model. II. Number-average molecular weight and apparent initiator efficiency

The equations for predicting the number-average molecular weight are derived on the basis of the three stage polymerization model (TSPM) in this paper. By applying the equations, a plotting approach is proposed to determine the apparent initiator efficiency defined as f[(α_td+1)/2] and the constant of chain transfer to monomer, where f is the initiator efficiency and α_td denotes the fraction of the termination rate constants by disproportionation. Using the approach to plot the experimental data in the literature, it is found that the chain transfer to monomer can be neglected for both methylmethacrylate (MMA) and styrene (St) polymerizations, but it can exert a significant effect on ethylmethacrylate (EMA) polymerization. In addition, the apparent initiator efficiency is found to be independent of reaction temperature and initiator concentration at each stage. The values of f[(α_td+1)/2] at gel effect stage are slightly reduced as compared with that at low conversion stage for MMA and EMA polymerizations. However, it decreases significantly at gel effect stage for St polymerization. Using the equations derived and the apparent initiator efficiencies obtained from TSPM plots, the number-average molecular weights at different conversions can be predicted. Comparisons show that the agreement between predictions and experimental data is satisfactory.     

板式换热器热端跑冷问题的分析及处理

１００００ｍ３／ｈ制氧机板式换热器损坏修复后，热端跑冷严重，氧气取出量不足，制氧机工况恶化，通过分析找出了原因是因某单元氧通道堵塞，并采取了处理措施。     

高含硫钻井液缓蚀剂的合成及性能研究

本文合成了抑制H₂S腐蚀的咪唑啉类缓蚀剂,并研究了它们的性能。正交试验表明,最佳合成条件是:反应温度:190～200℃;酸:胺(mol比)=1:1.05;反应时间以3～5小时为宜。根据以上条件合成的缓蚀剂,在含有3200mg/lH₂S的泥浆中,用量为0.2%时,抑制效果能达到80～90%,与碱式碳酸锌复配使用时,能提高缓蚀效率和降低碱式碳酸锌的用量,并发现缓蚀剂与CaO之间具有明显的协同效应。泥浆流变性能试验表明,缓蚀剂能提高泥浆的动切力和动塑比,对失水量影响不大。此外,利用X-射线衍射试验证明:(1)低碳钢在含H₂S的泥浆中,腐蚀产物的主要组成为Fe₉S₆;(2)H₂S会破坏FCLS的稳定性,分解出Fe²⁺,与H₂S反应生成面心立方的Fe₂S₄。     

Exploratory analysis of brain connectivity with ICA.

Covariance-based methods of exploration of functional connectivity of the brain from functional magnetic resonance imaging (fMRI) experiments, such as principal component analysis (PCA) and structural equation modeling (SEM), require a priori knowledge such as an anatomical model to infer functional connectivity. In this research, a hybrid method, combining independent component analysis (ICA) and SEM, which is capable of deriving functional connectivity in an exploratory manner without the need of a prior model is introduced. The spatial ICA (SICA) derives independent neural systems or sources involved in task-related brain activation, while an automated method based on the SEM finds the structure of the connectivity among the elements in independent neural systems. Unlike second-order approaches used in earlier studies, the task-related neural systems derived from the ICA provide brain connectivity in the complete statistical sense. The use and efficacy of this approach is illustrated on two fMRI datasets obtained from a visual task and a language reading task.     

钻井液用降滤失润滑剂的研制与应用

以沥青磺化为基础,辅以表面活性剂和降滤失剂等材料,通过化学处理加工研制出了ZR-1钻井液用降滤失润滑剂.由于大多数润滑剂在使用过程中容易出现起泡现象,因此在研制ZR-1的过程中对乳化剂进行了优选,通过调整HLB值,达到了不起泡的效果.该产品不仅能显著改善钻井液的润滑性,而且降滤失的效果好,能使泥饼黏滞系数降低50%以上,高温高压滤失量降低20%以上;该产品无毒无害,不污染环境,储存、运输和使用均方便安全.对ZR-1的性能进行了室内试验评价,介绍了该处理剂在川渝地区的应用.