测井曲线拐点在测井层序地层分析中的应用研究

在层序地层学研究中，层序界面的划分是基础和重要的环节，而利用测井资料分析可以进行层序界面划分和进行较长期基准面旋回识别。测井曲线的值是深度的函数，测井曲线的一阶导数表示了曲线变化的趋势和变化的快慢，在某一范围内，当一阶导数呈现符号转换时，相对应的深度点的测井值即为该范围内极大（极小）值；测井曲线的二阶导数则表示曲线的凹凸性，在某一范围内，当二阶导数呈现符号转换时，相对应的深度点代表了测井曲线的拐点，即反映曲线凹凸性变化的转折点，亦即地层的分界面。基于以上特点，提出利用测井曲线拐点进行层序界面划分的原理和方法，并结合岩心和录井资料，对白音查干凹陷达28井腾格尔组不同级次沉积旋回、地层垒积、旋回特征随沉积厚度变化特点和不同级次基准面旋回进行研究，最后得到该地层单井测井层序地层分析结果。     

具有迭代结构的时频分布计算方法

本文讨论了时频分布中的迭代算法的问题.通过选择特殊的计算窗口,时频分布的迭代运算形式能够有效地利用前面数据段的分析结果,从而避免了重复性的运算,使得计算效率得到提高.本文对原有的利用单边窗口的时频分布迭代算法的性能进行了分析,提出了采用对称型窗口的迭代计算形式.与单边窗口相比,双边形式的计算窗口不但可以有效地提高时频表示精度,同时还能够更为准确的表示信号的瞬时频率.文章对各项理论分析结果提供了相应的仿真实验结果.     

Analysis and Optimization of the Energy Efficiency in the 802.11 DCF

This paper introduces an analytical model to investigate the energy efficiency of the IEEE 802.11 distributed coordinated function (DCF). This model not only accounts for the number of contending nodes, the contention window, but also the packet size, and the channel condition. Based on this model, we identify the tradeoff in choosing optimum parameters to optimize the energy efficiency of DCF in the error-prone environment. The effects of contention window and packet size on the energy efficiency are examined and compared for both DCF basic scheme and DCF with four-way handshaking. The maximum energy efficiency can be obtained by combining both the optimal packet size and optimal contention window. To validate our analysis, we have done extensive simulations in ns-2, and simulation results seem to match well with the presented analytical results. The Ohio Board of Regents Doctoral Enhancements Funds and the National Science Foundation under Grant CCR 0113361 have supported this work. Xiaodong Wang received his B.S. degree in communication engineering from Beijing Information Technical Institute of China in 1995, and his M.S. degree in electric engineering from Beijing University of Aeronautics and Astronautics of China in 1998. He joined China Telecom in 1998 where he worked on communication protocols for telecommunication. From June 2000 to July 2002, he worked on GSM base station software development at Bell-labs China, Beijing, China. Currently he is a Ph.D. student in Computer Engineering at University of Cincinnati. His research activities include wireless MAC protocols, energy saving for wireless sensor networks. He is a student member of the IEEE. Jun Yin received the BS degree in automatic control from Dalian Railway Institute of China in 1997, and the MS degree in flight control from Beijing University of Aeronautics and Astronautics of China in 2001. Since 2001 she has been a Ph.D. student in the OBR Research Center for Distributed and Mobile Computing at the University of Cincinnati. Her research interests include performance evaluation of 802.11 MAC protocol, wireless ad hoc networks and sensor networks. She is a student member of the IEEE. Dharma P.Agrawal IEEE Fellow, 1987; ACM Fellow, 1998; AAAS Fellow, 2003 Dr. Agrawal is the Ohio Board of Regents Distinguished Professor of Computer Science and Computer Engineering in the department of Electrical and Computer Engineering and Computer Science, University of Cincinnati, OH. He has been a faculty member at Wayne State University, (1977–1982) and North Carolina State University (1982–1998). He has been a consultant to the General Dynamics Land Systems Division, Battelle, Inc., and the U. S. Army. He has held visiting appointment at AIRMICS, Atlanta, GA, and the AT&T Advanced Communications Laboratory, Whippany, NJ. He has published a number of papers in the areas of Parallel System Architecture, Multi computer Networks, Routing Techniques, Parallelism Detection and Scheduling Techniques, Reliability of Real-Time Distributed Systems, Modeling of C-MOS Circuits, and Computer Arithmetic. His recent research interest includes energy efficient routing, information retrieval, and secured communication in ad hoc and sensor networks, effective handoff handling and multicasting in integrated wireless networks, interference analysis in piconets and routing in scatternet, use of smart directional antennas (multibeam) for enhanced QoS, Scheduling of periodic real-time applications and automatic load balancing in heterogeneous workstation environment. He has four approved patents and three patent filings in the area of wireless cellular networks.     

钌基厚膜电阻传导模型初探

介绍钌基厚膜电阻的三种传导模型。三种模型都可以得到较满意的R—V曲线，不足处是链模型得出电阻率和导电相粒子形状及尺寸的关系和实验事实不符；有效介质模型不能反映厚膜电阻形成过程中众多因素的影响；渗透模型很多参数的获得有赖经验公式。渗透模型能反映烧结过程中更多因素的影响，并可解释方阻与导电相粒度及峰值温度的变化关系。     

纳米Fe粉的制备研究

总结了纳米Fe粉的制备方法,重点介绍了一种新的制备方法——封闭循环氢还原法。该方法以FeSO·47H2O和NaOH为原料,采用沉淀方法制备粒径为30～70nm的Fe2O3粉末,其反应条件为:反应温度50℃,反应终点pH值大于12,陈化时间1h。用封闭循环氢还原法,在400℃下还原Fe2O3得到了Fe粉。其粒径在20～50nm之间,含量为99.16%。     

从铅阳极泥处理后的渣料中综合回收有价金属的生产实践

叙述了从铅阳极泥回收金银后的渣料中综合回收有价金属的生产实践。根据渣料性质，将火法和湿法工艺相互结合，使渣料中的锑、铋、金、银、铅、铜得以较彻底的分离和回收。     

提高加热炉热效率措施的探讨

对本厂常减压装置提高加热炉热效率采取的措施进行了分析和总结     

Numerical Simulation of Thermal Stress Fields in the Magnetic Quenching Process of 45 Steel

Based on a transient temperature distribution of a 45 steel cylinder workpiece during magnetic quenching, which was obtainedby solving the governing equations with nonlinear boundary on the condition of coupling effects of heat-magnetism. Accordingto the     

无线光接入技术

无线光通信系统以其高带宽、低成本和安装迅捷等优势成为非常有竞争力的光接入新技术。对无线光通信系统的关键技术、主要优势和存在的问题及国内外相关产品的发展状况和主要特点进行了论述和介绍。