Abatement of Organic Pollutant Concentrations in Residual Treatment Sludges: A Review of Selected Treatment Technologies Including Drying

As a result of increasing population, industrialization, and effluent quality, sludge production has increased worldwide. Organic micropollutants in sludge have become a more critical environmental health concern compared to heavy metals. New sludge disposal regulations limit persistent organic pollutants (POPs) in addition to conventional organic indicators like total and dissolved organic carbon. This study aims at providing a brief review on POP concentration in the sludge in different regions of the world, sludge regulations, assessment of conventional biological sludge stabilization methods according to their ability to remove POPs, and discussions on alternative sludge treatment methods. The impact of sludge treatment unit operations including conditioning, thickening, mechanical and thermal dewatering, and biological and thermal stabilization on sludge management is also discussed in the context of organics. The occurrence and removal of micropollutants such as absorbable organic halogen compounds (AOX), nonylphenol and nonylphenol ethoxylates (NPE), di-2-(ethyl-hexyl)-phthalate (DEHP), dibenzo-p-dioxins and furans (PCDD/F), polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) are also evaluated specifically for sludge treatment unit operations. A concise discussion is also included on different drying technologies suitable for drying of sludge.     

Preparation and Characterization of PVA/PVP Nanofibers as Promising Materials for Wound Dressing

The PVA/PVP, PVA/PVP with 5% and 10% chitosan and PVA/PVP-Iodine fibers were produced via electrospinning technique. Their morphological and chemical characteristics were examined with SEM, TGA, FT-IR, viscometer and four-point probe conductivity measurement apparatus. The addition of chitosan increased the viscosity and the electrical conductivity of the polymer. The increase chitosan contents resulted in the diameters of the fibers smaller than expected. This was attributed to the increase in the viscosity of the solution and the electrical conductivity of the resulting fibers. The DSC results show that iodine was efficiently cross-linked with the polymer, forming an amorphous structure.     

EFFECT OF INITIAL MOISTURE CONTENT ON THE THIN LAYER DRYING CHARACTERISTICS OF HAZELNUTS DURING ROASTING

ABSTRACT

Effect of initial moisture content on the thin layer drying characteristics of hazelnuts during roasting was described for a temperature range of 100-160°C, using several thin layer equations. The effective diffusivity varied from 2.8×10^?7 to 21.5×10^?7m²/s over the temperature and moisture range. Temperature dependence of the diffusivity coefficient was described by Arrhenius-type relationship. The activation energy for moisture diffusion was found to be 2703 kJ/kg, 2289 kJ/kg and 2030 kJ/kg for the initial moisture content of 12.3% db, 6.14% db, and 2.41% db, respectively. Two-term equation gave better predictions than Henderson and Pabis and Thompson equations, and satisfactorily described thin layer drying characteristics of hazelnut roasting. A generalised mathematical model with the linear temperature dependence for moistured, non-treated and pre-dried hazelnuts were also developed.     

Highly Efficient Room Temperature Synthesis of Silver‐Doped Zinc Oxide (ZnO:Ag) Nanoparticles: Structural,Optical, and Photocatalytic Properties

Synthesis of silver‐doped zinc oxide (ZnO:Ag) nanoparticles through precipitation method has been reported. The synthesis was conducted at room temperature and no subsequent thermal treatment was applied. ZnO nanoparticles were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS), fourier transmission infrared spectroscopy (FTIR), and ultraviolet‐visible (UV–Vis) spectroscopy. Detailed crystallographic investigation was accomplished through Rietveld refinement. The effect of silver content on structural and optical properties of resultant ZnO nanoparticles has been reported. It was found that silver doping results in positional shifts for the XRD peaks and the absorption band edge of ZnO. These were attributed to the substitutional incorporation of Ag⁺ ions into Zn²⁺ sites within the ZnO crystal. In addition, higher silver incorporation resulted in smaller size for ZnO nanoparticles. The photocatalytic activity of the ZnO:Ag nanoparticles was also determined by methylene orange (MO) degradation studies and compared to that of undoped ZnO. Improved photocatalytic activity was obtained for ZnO:Ag nanoparticles. It has been shown that an optimum amount of silver dopant is required to obtain maximum photocatalytic activity.     

Effects of Nanoparticles on Film Properties of Waterborne Acrylic Emulsions

Waterborne acrylic emulsion was obtained by using methyl methacrylate, ethyl and butyl acrylate monomers. Emulsions containing nanoparticles were prepared by blending the stable dispersions containing SiO₂ or MMT nanoparticles. The films were prepared from emulsions and coating tests were applied. The physical properties of prepared emulsions are better than the commercial emulsions. The addition of the nanoparticles especially SiO₂ have positive effect on the resistance to environmental conditions of emulsions. Waterborne acrylic emulsions containing nanoparticles prepared in this study can be used in the manufacturing of the semi-lustrous emulsion type nano paint with low cost, high performance and environmentally friendly.     

Analysis of Physical and Thermodynamic Properties of Poly(2-Phenyl-1,3-Dioxolane-4-Yl-Methyl-Methacrylate-Co-Styrene) Polymer with Inverse Gas Chromatography

In this study, physical and thermodynamic properties of poly(2-phenyl-1,3-dioxolane-4-yl-methyl-methacrylate-co-styrene) (PDMMA-ST) were investigated by using inverse gas chromatography. Two groups of solvents with different chemical natures and polarities were used to obtain information about PDMMA-ST-solvent interactions: alcohols and alkanes. The specific retention volume (V_g ⁰), the sorption enthalpy (ΔH₁ ^S), sorption free energy (ΔG₁ ^S), sorption entropy (ΔS₁ ^S), the weight fraction activity coefficients of solute probes at infinite dilution (Ω ₁ ^∞), and Flory-Huggins interaction parameters (χ ₁₂ ^∞) between polymer and solvents were determined for the interactions of PDMMA-ST with alcohols and alkanes by inverse gas chromatography in the temperature range of 333–473 K. Also, the solubility parameters of PDMMA-ST at infinite dilution were found by plotting the graph of [(δ ₁ ²/RT) - χ ₁₂ ^∞/V₁] versus solubility parameters, δ ₁, of probes.     

Physical and Mechanical Properties of Iron Powder Filled Polystyrene Composites

This article reports on an experimental study of the physical and mechanical properties of Polystyrene (PS) and Fe-PS polymer composites containing 5, 10, and 15 vol.% of Fe powder. After mixing Fe powder and PS in a twin-screw extruder, an injection-molding machine was used to prepare unfilled PS and Fe-PS polymer composite samples. After that, the material properties were experimentally determined for each sample. The investigated material properties included the modulus of elasticity, yield and tensile strength, % elongation, Izod impact strength (notched), hardness (Shore D), melt flow index (MFI), heat deflection temperature (HDT), Vicat softening point, and glass transition temperature (T _g ). The results indicated that, compared to the unfilled PS, an addition of Fe into PS decreases the yield and tensile strength, % elongation, and Izod impact strength. Furthermore, it was determined that the Fe particles increase the modulus of elasticity, hardness, MFI, Vicat softening point, and HDT values.     

Application of adaptive neuro-fuzzy interference system on biosorption of malachite green using fir (Abies nordmanniana) cones biomass

Removal of malachite green (MG) onto fir (Abies nordmanniana) cones biomass (FCB) as a lingo-cellulosic-based structure material was investigated in the present study. Characterization of FCB was performed using Fourier transform infra red and scanning electron microscobe analyses. Several parameters (biomass dose and particle size, dye concentration, temperature, and pH) were investigated to determine optimal working conditions. Subsequently, FCB yelded a q_e of 2.2?mg/g for 50?g/L FCB, in an MG solution of 110?mg/L, pH 3.3, at a temperature of 21?°C, on a 0.2-0.4?mm fraction powder after 146?h of contact. Adaptive neuro-fuzzy interference system modeling was applied to experimental data and results showed that predicted model fitted experimental data with R² = 0.994. In a nutshell, it can be concluded that FCB shows good potential for treating MG contaminated waters.     

Phase Transfer Catalysis with Quaternary Ammonium Type Gemini Surfactants: <Emphasis Type="Italic">O</Emphasis>-Alkylation of Isovanillin

In this paper, O-alkylation of isovanillin with unusual phase transfer catalysts alkandiyl-α,ω-bis(dimethylalkylammonium bromide) dimeric surfactants (also known as gemini surfactants) is described. Some dimeric surfactants with simple hydrophobic alkyl chains and others with hydrophobic alkyl chains containing ester functionalities with different lengths were synthesized and characterized in our laboratory. The alkylation of isovanillin with alkyl halide was successively carried out in the presence of potassium carbonate and a phase transfer catalyst in tetrahydrofuran. The same reactions were also performed with both the traditional phase transfer catalyst tetrabutylammonium bromide and without any catalyst. The results were compared with those of dimeric surfactants. Consequently, it was expressed that alkandiyl-α,ω-bis(dimethylalkylammonium bromide) dimeric surfactants successively exhibit the character of phase transfer catalysts through environmentally friendly procedures under mild conditions. The most significant feature of this work is that dimeric surfactants have been determined to act as phase transfer agents.     

Preparation and properties of selective polyurethane films and their use for the development of biomedical dopamine sensor

Polyurethane films were synthesized by 3,4-divanillyltetrahydrofuran and different diisocyanates. These prepared polyurethanes were characterized by FT-IR, DSC, DTA, and TGA techniques. For the amperometric applications, synthesized polyurethanes exhibited suitable T_g (°C), good thermal stability and good adhesive properties. In addition, because of their interesting film properties, attempts were made to prepare dopamine-sensing electrode. For this reason, selectivity of film-coated electrodes obtained from the chemically prepared polyurethanes toward electroactive and nonelectroactive species were examined by means of DPV technique. From the electrochemical results obtained, it has been demonstrated that the PU-1-coated electrode can be used for the development of biomedical sensor.