Pt nanoparticles synthesized with new surfactants: improvement in C1–C3 alcohol oxidation catalytic activity

Platinum electrocatalysts were prepared using PtCl₄ as a starting material and 1-decylamine, N,N-dimethyldecylamine, 1-dodecylamine, N,N-dimethyldodecylamine, 1-hexadecylamine, and 1-octadecylamine as surfactants. These surfactants were used for the first time in this synthesis to determine whether the primary and/or tertiary structure and/or chain length of the surfactants, affects the size and/or activity of the catalysts in C₁–C₃ alcohol electro-oxidation reactions. Electrochemical measurements (cyclic voltammetry and chronoamperometry) indicated that the highest electrocatalytic performance was observed for the Pt nanocatalysts that were stabilized by N,N-dimethyldecylamine, and this has a tertiary amine structure with a short chain length (R = C₁₀H₂₁). The high performance may be due to the high electrochemical surface area, Pt(0)/Pt(IV) ratio, %Pt utility, and roughness factor (R _f). X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy, and transmission electron microscopy were used to determine the parameters that affect the catalytic activities.     

Calculations of neutron-induced production cross-sections of W up to 20 MeV

Neutron-induced cross-sections for the stable isotopes ^{180,182,183,184,186}W in the energy region up to 20 MeV have been calculated. Calculations were made with the codes CEM03.01 and ALICE/ASH, using the following models: the Dubna version of the intranuclear cascade model for the cascade stage of interaction; the hybrid, the geometry dependent hybrid and the exciton model for the pre-equilibrium component; the Hauser–Feshbach and the Weisskopf–Ewing statistical models for the equilibrium component. Effects of some important model parameters such as level density parameter and pairing correction were investigated. Calculated cross-sections were compared with available experimental data in the literature and with ENDF/B-VI T = 300 K and JENDL-3.3 T = 300 K evaluated data libraries.     

Improved interfacial adhesion with the help of functional polyhedral oligomeric silsesquioxanes in silicone rubber/rayon fiber composites: Physical,mechanical, thermal,and morphological properties

The aim of this article is to improve the interfacial adhesion between silicone rubber (SR) and Rayon fiber by the help of functional hybrid POSS nanoparticles. Two POSS types were compared, octavinyl-POSS (O-POSS) and methacryl-POSS (M-POSS), having reactive  CC double bonds that can impart in peroxide crosslinking. O-POSS is nonpolar, whereas M-POSS is polar and is able to make H-bond with Rayon fibers. POSS type and their concentrations were examined as the experimental parameters. H-adhesion tests indicated that both POSS types enhanced the adhesion of SR composites to Rayon fibers compared with control recipe. Specifically, slightly higher values were obtained with the use of M-POSS. It was observed that both O-POSS and M-POSS slowed down the curing rate but increased the degree of crosslinking. The cure extent of O-POSS containing composites was found to be higher than that of M-POSS containing ones. Thermal gravimetric analyses revealed that thermal stability of SR composites was significantly improved by the addition of POSS particles. Higher char yield and degradation temperatures were obtained with O-POSS at higher loadings with respect to M-POSS. The POSS distribution at lower loading levels was found to be homogenous for both POSS types as observed from scanning electron microscope and transmission electron microscope.     

Synthesis and characterization of a Zr‐containing silicate‐based epoxy‐functional polymer nanocomposite system

As a continuation of efforts to explore the potential of certain types of polymer nanocomposites to be successful candidates as dental restoration/adhesion materials, a Zr‐containing and organically modified silicate‐based material system with epoxy functionality was prepared by use of a sol–gel synthesis method, and UV light‐ and visible light (VL)‐curing processes. Comparative influences of the synthesis and processing parameters on the mechanical, thermal, and microstructural/nanostructural properties of the system were detailed. Zr‐containing species proved to more effectively catalyze the epoxy polymerization/crosslinking reactions than those containing Ti. Incorporation of Zr into the nanocomposite network led to significantly advanced mechanical properties. An elastic (Young's) modulus value of 23 MPa was achieved. The system with relatively high Zr content was successfully obtained, which also had higher thermal stability. Overall observations and results suggested that Zr content, and the UV light‐ or VL‐curing process could be capitalized on to modify the structure, and to improve the final properties of these material systems, which indicated a prospective opportunity for this material system to be utilized in dental restoration/adhesion applications. POLYM. ENG. SCI., 55:792–798, 2015. © 2014 Society of Plastics Engineers     

Synthesis and characterization of novel poly(dimethylsiloxane)/polyindole composites

A series of composites of polyindole (PIN) and poly(dimethylsiloxane) (PDMS) were synthesized chemically using FeCl₃ as an oxidant agent in anhydrous media. The composites were characterized by FTIR and UV‐visible spectroscopies, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X‐ray diffraction (XRD), elemental analysis, inductively coupled plasma‐optic emission spectroscopy (ICP‐OES), magnetic susceptibility, stress–strain experiments, and conductivity measurements. The conductivities of PIN at different temperatures were also measured and it was revealed that their conductivities were slightly increased with increasing temperature. Moreover, the freestanding films of PDMS/PIN composites were prepared by casting on glass Petri dishes to examine their stress–strain properties. From thermogravimetric analysis results it was found that PDMS/PIN composites were thermally more stable than PIN. Thermal stabilities of PDMS/PIN composites increased with increasing PIN content. It was found that the conductivities of PDMS/PIN composites depend on the indole content in the composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Supramolecular Assemblies Constructed by Cucurbituril-Catalyzed Click Reaction

Cucurbituril homologues are multi-functional macrocycles that can find applications in many areas and have numerous interesting features setting them apart from the other macrocycles. Among them, the ability of one of the cucurbituril homologues, cucurbit[6]uril (CB6), to catalyze 1,3-dipolar cycloaddition in a regiospecific fashion is truly exceptional. Using this feature, small molecules can be clicked together to form complex structures in a very efficient way. Accordingly, in this article we review recent research involving the use of CB6-catalyzed 1,3-dipolar cycloaddition or the click reaction of CB6 in the construction of supramolecular assemblies including rotaxanes, pseudorotaxanes, polyrotaxanes, polypseudorotaxanes, molecular switches, machines, and nanovalves.     

Entrapment of urease in poly(1‐vinyl imidazole)/poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) network

In this article, urease was immobilized in a conducting network via complexation of poly(1‐vinyl imidazole) (PVI) with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) (PAMPS). The preparation method for the polymer network was adjusted by using Fourier transform infrared (FTIR) spectroscopy. A scanning electron microscope (SEM) study revealed that enzyme immobilization had a strong effect on film morphology. The proton conductivity of the PVI/PAMPS network was measured via impedance spectroscopy, under humidified conditions. The basic characteristics (Michealis‐Menten constants, pH_opt, pH_stability, T_opt, T_stability, reusability, and storage stability) of the immobilized urease were determined. The obtained results showed that the PAA/PVI polymer network was suitable for enzyme immobilization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fabrication and characterization of in-situ Al3Ni intermetallic and CeO2 particulate-reinforced aluminum matrix composites

Al-xNi-yCeO₂ (x = 6, 10, 15, 20 and y = 0, 5, 10 wt%) composites were produced by a powder metallurgical production route. Powder mixtures of Al, Ni and CeO₂ were fabricated via mechanical alloying (MA) for 4 h in a Spex-type high-energy ball mill. Both the mechanically alloyed (MAed) and non-MAed (as-blended mixtures) powders were pre-compacted in a hydraulic press under 650 MPa and then pressurelessly consolidated at 630 °C for 2 h under an inert atmosphere. The effects of MA process and the amounts of Ni and CeO₂ on the microstructural, mechanical and tribological properties of the sintered composites were determined. Based on the SEM and XRD investigations, the MAed powders illustrated a homogenous structure, comprising flaky particles with smaller crystallite sizes and greater lattice strain. According to the XRD analysis, Ni formed Al–Ni intermetallic compounds in the matrix of sintered composites that act as secondary reinforcement phases. The SEM observations conducted on the MAed samples demonstrated more uniformly and finely distributed Al₃Ni and CeO₂ phases in the microstructure of the MAed samples, unlike the non-MAed ones. The hardness values of sintered composites increased due to the MA process and increasing Ni and CeO₂ amounts, and the hardness value of the MAed Al20Ni–10CeO₂ sample reached 179 HV. The ultimate compressive strength and failure strain of the MAed Al6Ni–10CeO₂ sample were 441 MPa and 11.3%. In the Al20Ni–10CeO₂ sample, the compressive strength and failure strain were 391 MPa and 5.5%, respectively. Additionally, the reciprocating wear test results illustrated that both wear resistance and hardness values of the composites increased as the amounts of Ni and CeO₂ increased, and the Al20Ni–10CeO₂ sample exhibited the highest wear resistance as 0.175 × 10^-3 mm³/Nm.