高起点、高投资、高速度、高品位——沃德:后起之秀的崛起之道

河南沃德新世纪能源股份有限公司始建于2006年,依托母公司房地产业的强大后盾,总投资1.5亿元,主要产品有铜管水道系列、铜(钢)铝复合系列、钢制柱型系列、艺型卫浴系列的散热器产品近70个品种.2008年7月,距奥运会开幕前11天,沃德以沃德奥宴·璀璨珍享为主题组织了沃德散热器(中国)竞合工程市场新闻发布会,沃德挺进工程市场;2008年10月, 沃德杯第二届全国采暖散热器经销商创富峰会,厂商联销体战略受业界关注;2009年9月,沃德钢制多管柱型散热器,通过国家住房和城乡建设部科技成果评估;2010年3月,在北京国际供暖博览会上,以绿暖人间为主题活动的生态沃德,创造了让人为之侧目的奇迹--7000多观众光临沃德展厅,其产品荣获了国家采暖散热器委员会组织行业专家评选的金质产品奖.     

魔芋葡甘聚糖及其油酸酯化物的体外抗氧化初步研究

对魔芋葡甘聚糖(KGM)和魔芋葡甘聚糖油酸酯(KGM酯)体外抗氧化性进行了研究。通过氧化诱导试验、清除DPPH自由基、清除ABTS自由基、对Fe~(2+)螯合能力、还原能力试验发现:KGM和KGM酯均有一定的抗氧化性,酯化度越高,抗氧化能力越强;当菜籽油中KGM和酯化度最高的KGM酯1添加量为0.8%时,与空白对照相比其氧化诱导时间分别延长5.94 h和2.56 h;在KGM酯与茶多酚、V_C、TBHQ协同试验中,KGM酯也表现出一定抗氧化性;质量浓度为0.5 mg/m L时,KGM和KGM酯1对DPPH自由基清除率分别为61.68%和36.93%;质量浓度为2.0 mg/m L时,KGM和KGM酯1对ABTS自由基清除率分别为20.31%和17.26%,对Fe~(2+)螯合率分别为17.58%和9.79%。虽然KGM酯化后其抗氧化能力稍有减弱,但仍具有抗氧化性,且与酯化程度呈正相关。     

大孔吸附树脂纯化亚麻木酚素及其抗氧化活性研究

研究不同乙醇浓度对大孔吸附树脂纯化亚麻木酚素(SDG)的影响,并分析比较相应洗脱物的抗氧化活性。结果表明:与亚麻籽粕相比,洗脱物的纯度和抗氧化活性均有一定的提高。其中,30%乙醇洗脱物中SDG含量最高为62.49%,该洗脱物对DPPH自由基的清除率为44.2%,对Cu~(2+)的还原能力为0.91 mg Trolox/mg样品,对Fe~(2+)的螯合率为53.54%。     

先进大学文化与大学良性发展论纲

理解大学文化的内涵,其基本内容应涵盖大学的精神文化、制度文化、物质文化三个层次.     

微波处理对芝麻出油率及油脂品质的影响

对芝麻油料进行微波处理,选择微波功率、微波时间、增湿比例、缓苏时间为影响因素,饼残油率为考察指标,进行单因素实验,再在单因素实验结果基础上,进行正交实验,确定最佳微波条件,最后对比未经微波处理和最佳条件微波处理后所得油脂的品质。结果表明,微波处理能够提高芝麻出油率,且微波处理能够提高油中芝麻素和芝麻林素的含量,但对芝麻油的色泽、碘值、酸值、主要脂肪酸含量影响不大。微波处理后芝麻油的过氧化值会提高,但其含有的芝麻素、芝麻林素等抗氧化物质会使其氧化稳定性提高。微波处理油料可用作油料的预处理。     

地域性农产品包装设计策略研究

在国家乡村振兴战略的指导下,全面推动农业发展与升级,农业高质量发展使农产品的包装设计具有更多的可能性,包装既是载体又是媒介,不仅要满足功能上的需要,还要随着社会和时代的发展而变化,以满足受众人群物质和精神的双重需求,同时要具有时代特色,引领消费者形成更好的生活状态和消费取向.良性的包装设计能够更高效地帮助产品讲好故事,...     

Influence of substituting Ni with Co on hydriding and dehydriding kinetics of melt spun nanocrystalline and amorphous Mg2Ni-type alloys

In order to improve the hydriding and dehydriding kinetics of the Mg₂Ni-type alloys, Ni in the alloy is substituted by element Co. The nanocrystalline and amorphous Mg₂Ni-type Mg₂Ni_1−x Co _x (x=0, 0.1, 0.2, 0.3, 0.4) alloys were synthesized by melt-spinning technique. The structures of the as-cast and spun alloys were studied with an X-ray diffractometer (XRD) and a high resolution transmission electronic microscope (HRTEM). An investigation on the thermal stability of the as-spun alloys was carried out with a differential scanning calorimeter (DSC). The hydrogen absorption and desorption kinetics of the alloys were measured with an automatically controlled Sieverts apparatus. The results demonstrate that the substitution of Co for Ni does not alter the major phase of Mg₂Ni but results in the formation of secondary phase MgCo₂. No amorphous phase is detected in the as-spun Co-free alloy, but a certain amount of amorphous phase is clearly found in the as-spun Co-containing alloys. The substitution of Co for Ni exerts a slight influence on the hydriding kinetics of the as-spun alloy. However, it dramatically enhances the dehydriding kinetics of the as-cast and spun alloys. As Co content (x) increases from 0 to 0.4, the hydrogen desorption capacity increases from 0.19% to 1.39% (mass fraction) in 20 min for the as-cast alloy, and from 0.89% to 2.18% (mass fraction) for the as-spun alloy (30 m/s).     

La替代Mg对Mg2Ni型合金电化学贮氢性能的影响

用快淬工艺制备了纳米晶和非晶Mg2Ni型Mg2 -xLaxNi (x=0,0.2,0.4,0.6)贮氢电极合金,获得长度连续,厚度约为30μm,宽度约为25 mm的薄带.用XRD、SEM和HRTEM分析了快淬合金薄带的微观结构,测试了合金薄带的电化学性能及电化学交流阻抗谱(EIS).快淬无La合金具有典型的纳米晶结构,...     

An Investigation on Hydrogen Storage Kinetics of the Nanocrystalline and Amorphous LaMg_(12)-type Alloys Synthesized by Mechanical Milling

Nanocrystalline and amorphous LaMg_(12)-type LaMg_(11)Ni + x wt% Ni(x = 100, 200) alloys were synthesized by mechanical milling. Effects of Ni content and milling time on the gaseous and electrochemical hydrogen storage kinetics of as-milled alloys were investigated systematically. The electrochemical hydrogen storage properties of the as-milled alloys were tested by an automatic galvanostatic system. And the gaseous hydrogen storage properties were investigated by Sievert apparatus and a differential scanning calorimeter(DSC) connected with a H_2 detector. Hydrogen desorption activation energy of alloy hydrides was estimated by using Arrhenius and Kissinger methods. It is found that the increase of Ni content significantly improves the gaseous and electrochemical hydrogen storage kinetic performances of as-milled alloys. Furthermore, as ball milling time changes, the maximum of both high rate discharge ability(HRD) and the gaseous hydriding rate of as-milled alloys can be obtained. But the hydrogen desorption kinetics of alloys always increases with the extending of milling time. Moreover, the improved gaseous hydrogen storage kinetics of alloys are ascribed to a decrease in the hydrogen desorption activation energy caused by increasing Ni content and milling time.