Wearing prediction of stellite alloys based on opposite degree algorithm

In order to predict the wearing of stellite alloys,the related methods of rare metals data processing were discussed. The method of opposite degree(OD) algorithm was put forward to predict the wearing of stellite alloys.OD algorithm is based on prior numerical data, posterior numerical data and the opposite degree between numerical forecast data. To compare the performance of predicted results based on different algorithms, the back propagation(BP) and radial basis function(RBF) neural network methods were introduced. Predicted results show that the relative error of OD algorithm is smaller than those of BP and RBF neural network methods. OD algorithm is an effective method to predict the wearing of stellite alloys and it can be applied in practice.     

Pruning Redundant Alarm Correlation Patterns

1　ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｓｔｉｃｋｉｎｇｐｏｉｎｔｏｆａｓｓｏｃｉａｔｉｏｎｒｕｌｅａｌｇｏｒｉｔｈｍｓｄｅｐｅｎｄｓｏｎｅｆｆｅｃｔｉｖｅｌｙｆｉｎｄｉｎｇａｌｌｃｏｒｒｅｌａｔｉｏｎｐａｔｔｅｒｎｓｔｈａｔｓａｔｉｓｆｙｖａｌｕｅｒｅｑｕｉｒｅｍｅｎｔｉｎｔｈｅｍａｇｎａｎｉｍｉｔｙｏｆｄａｔａ.Ｂｕｔｔｈｅａｌｇｏｒｉｔｈｍｓａｌｓｏｂｒｉｎｇａｎｅｇａｔｉｖｅｅｆ ｆｅｃｔ:ｔｈｅｎｕｍｂｅｒｏｆａｓｓｏｃｉａｔｉｏｎｒｕｌｅｓｉｓｖｅｒｙｌａｒｇｅ.Ａｌｓｏｉｎｆｏｒｍａｔｉｏｎ…     

Technology for recycling and regenerating graphite from spent lithium-ion batteries

With the annual increase in the amount of lithium-ion batteries (LIBs), the development of spent LIBs recycling technology has gradually attracted attention. Graphite is one of the most critical materials for LIBs, which is listed as a key energy source by many developed countries. However, it was neglected in spent LIBs recycling, leading to pollution of the environment and waste of resources. In this paper, the latest research progress for recycling of graphite from spent LIBs was summarized. Especially, the processes of pretreatment, graphite enrichment and purification, and materials regeneration for graphite recovery are introduced in details. Finally, the problems and opportunities of graphite recycling are raised.     

Laser particles with omnidirectional emission for cell tracking

The ability to track individual cells in space over time is crucial to analyzing heterogeneous cell populations.Recently,microlaser particles have emerged as unique optical probes for massively multiplexed single-cell tagging.However,the microlaser far-field emission is inherently direction-dependent,which causes strong intensity fluctuations when the orientation of the particle varies randomly inside cells.Here,we demonstrate a general solution based on the incorporation of nanoscale light scatterers into microlasers.Two schemes are developed by introducing either boundary defects or a scattering layer into microdisk lasers.The resulting laser output is omnidirectional,with the minimum-to-maximum ratio of the angle-dependent intensity improving from 0.007(-24 dB)to>0.23(-6dB).After transfer into live cells in vitro,the omnidirectional laser particles within moving cells could be tracked continuously with high signal-to-noise ratios for 2 h,while conventional microlasers exhibited frequent signal loss causing tracking failure.     

Theoretical prediction and experimental realization of transition metal doped rutiles as diluted magnetic semiconductors

1. Introduction The new research area of ‘spintronics’ seeks to extend the properties and applications of electronic devices by making use of the spin of electrons in ad- dition to their charge. The development of magnetic semiconductors would be compatible with standard semiconductor technology and open new opportuni- ties. The so-called diluted magnetic semiconductor (DMS) is used to denote the no magnetic semicon- ductor doped with magnetic ions, and there have been considerable progress…     

防紫外线织物的研究

由于大气污染、臭氧层变薄甚至出现空洞，紫外线辐射严重损坏人体皮肤、因此，开发防紫外线纺织品势在必行。文中介绍了纺织品防紫外线辐射的原理，阐述了防紫外线纺织品的加工方法和特点，并探讨了防紫外线纺织品的发展趋势。     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

椭圆管外流动熵产及放热系数的数值分析

以椭圆管加热水流动为研究对象,对椭圆管加热水流动系统进行了二维数值模拟。通过联立求解流体力学基本方程和熵产方程,获得了熵产、放热系数与雷诺数和纵、横向间距的变化关系。数值分析结果表明:熵产主要发生在管壁表面附近,而在系统内部区域熵产较小,可以忽略;熵产随雷诺数的增大而增大,随纵、横向间距增加而减小,熵产与雷诺数、纵、横向间距存在对应关系,纵、横向间距宜在1.75～2.0间;在相同的雷诺数值时,熵产、放热系数沿流动方向呈现单调减小的趋势;不同的雷诺数值,熵产、放热系数不同,单调减小的趋势相同。放热系数随Re的增大而增大,且与雷诺数存在对应关系。纵向总放热系数随纵、横向间距增大而减小,且存在对应关系。     

Planar waveguide refractive index distribution functions determined precisely from mode indices

The inverse WKB (IWKB) approximation has been extended to derive the index distribution functions from the measured mode indices of a planar waveguide. Through the use of this technique, the forms of the index distribution functions are obtained by IWKB approximation and a criterion is used to derive the functions accurately. The results are compared to the exponential and Fermi distributions. It is shown that the index profile, surface index, and waveguide depth can be obtained more accurately than with the original IWKB approximation. Finally, the index distribution function of a c-cut proton-exchanged LiTaO(3) waveguide is given by this technique, the mode indices calculated with this function agree with the experimental results in the range of 10(-4).