Effect of agitation, turbidity, aluminium foil reflectors and container volume on the inactivation efficiency of batch-process solar disinfectors

We report the results of experiments designed to improve the efficacy of the solar disinfection of drinking water, inactivation process. The effects of periodic agitation, covering the rear surface of the container with aluminium foil, container volume and turbidity on the solar inactivation kinetics of Escherichia coli (starting population = 10(6) CFU ml(-1)) were investigated. It was shown that agitation promoted the release of dissolved oxygen from water with subsequent decrease in the inactivation rates of E. coli. In contrast, covering the rear surface of the solar disinfection container with aluminium foil improved the inactivation efficiency of the system. The mean decay constant for bacterial populations in foil-backed bottles was found to be a factor of 1.85 (std. dev. = 0.43) higher than that of non-foil-backed bottles. Inactivation rates decrease as turbidity increases. However, total inactivation was achievable in 300 NTU samples within 8 h exposure to strong sunshine. Inactivation kinetics was not dependent on the volume of the water container for volumes in the range 500-1500 ml.     

Elimination of beta-blockers in sewage treatment plants

beta-Blockers are used to treat high blood pressure as well as patients recovering from heart attacks. In several studies, they were detected in surface water, thus indicating incomplete degradability of these substances in sewage treatment plants (STPs). In this study, we determined the sorption coefficients (K(D)) and degradation rates of the four beta-blockers sotalol, atenolol, metoprolol and propranolol in sludge from an STP operating with municipal wastewater. The sorption coefficients (K(D), standard deviations in brackets) were determined as 0.04(+/-0.035), 0.04(+/-0.033), 0.00(+/-0.023) and 0.32(+/-0.058) Lg(-1)(COD), and the pseudo-first-order degradation rate constants were estimated to be 0.29(+/-0.02), 0.69(+/-0.05), 0.58(+/-0.05) and 0.39(+/-0.07) Ld(-1)g(-1)(COD) for sotalol, atenolol, metoprolol and propranolol, respectively. These values translate into a typical elimination in STPs (sludge concentrations of 4g(COD)L(-1) and a hydraulic retention time of 6h) of 25%, 37%, 44% and 50% for sotalol, propranolol, metoprolol and atenolol, respectively. These results are also confirmed by measurements in two municipal STPs for atenolol, sotalol and propranolol. The estimated eliminations are slightly too high for metoprolol.     

Reproducibility of indoor environment characteristics obtained in a walk through questionnaire. A pilot study

Walk through questionnaires may be feasible tools to obtain data on the indoor environment in community studies. However, limited information is available regarding the reproducibility of the data obtained through these questionnaires. In this pilot study, two construction engineering students inspected ten dwellings twice by means of a standardized walk through questionnaire. The two engineering students inspected the dwellings independent of each other within two months. Time between the two visits varied between 14 and 40 days. The variables presented were based on information from the residents and inspection. The continuous variables recorded included number of rooms in the dwellings, room volume, length of filled shelves and textile area. The inter- and intra-observed variabilities were poorer for number of rooms and shelf factor than for the other variables. For the 3 of the 9 categorical variables based on inspection, the inter-observer comparison showed complete agreement with a kappa statistics of 1.0, these variables being condition of the window frames and construction of outside walls and roof. One of the categorical variables showed a kappa statistics of < 0.5, these variables being presence of basement and presence of condensation at windows. This study indicates a wide variation in observer variability between various items of a walk through questionnaire. Clear definitions of all the parts of the questionnaire are needed, as well as thorough training of observers.     

Analysis of foundation installation for old buildings in downtown Saint Petersburg

Basic types of foundations supporting old buildings in Saint Petersburg are reviewed. Fundamental relationships between the width and depth of embedment of the foundations and the number of stories are analyzed on the basis of field observations. Average pressures against the lower surfaces of the foundations are compared with design strengths adopted from modern standards for bed soils.Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 5, pp. 13–15, September–October, 2004.     

Particle-size distribution and phosphorus levels in soil, sediment, and urban dust and dirt samples from the Menomonee River Watershed, Wisconsin, U.S.A.

Soil, bottom sediment, suspended sediment, and urban street dust and dirt samples from the Menomonee River Watershed, Wisconsin, were dispersed by ultrasound, fractionated and analyzed for the P content of each of three particle-size fractions. The major soil types in the watershed were used as a reference for comparing particle-size distribution and P content in urban street dust and dirt, and in sediments.Phosphorus level was found to be greater in the clay-sized particles than in the sand- or silt-sized particles of urban street dust and dirt samples, but 48% of the P was in the sand-sized fraction because of the predominance of sand-sized particles in these samples. The highest P level in the clay-sized fraction of the bottom sediments occurred at the site below a sanitary treatment plant (STP) outfall with secondary treatment capability. The P level found below a tertiary STP outfall was equal to the level found in agricultural areas. When using P level in sediment for locating areas of possible P input to the river, the clay-sized fraction of bottom sediments was more precise than P levels in unfractionated samples.     

A framework for rapid local area modeling for construction automation

Rapid 3D positioning and modeling in construction can be used to more effectively plan, visualize, and communicate operations before execution. It can also help to optimize equipment operations, significantly improve safety, and enhance a remote operator's spatial perception of the workspace. A new framework for rapid local area sensing and 3D modeling for better planning and control of construction equipment operation is described and demonstrated. By combining human-assisted graphical workspace modeling with pre-stored Computer-Aided Design (CAD) models and simple sensors (such as single-axis laser rangefinders and remote video cameras), modeling time can be significantly reduced while potentially increasing modeling accuracy.     

The use of roughness to produce high reynolds number flows around circular cylinders at lower reynolds numbers

It has long been stated that the pressure distribution around a circular cylinder at high values of Reynolds number can be reproduced at lower values of Reynolds number by a suitable roughening of the surface of the cylinder. This paper shows that this is indeed possible and explains the problems.