Probabilistic design of a near-surface CO2 leak detection system

A methodology is developed for predicting the performance of near-surface CO(2) leak detection systems at geologic sequestration sites. The methodology integrates site characterization and modeling to predict the statistical properties of natural CO(2) fluxes, the transport of CO(2) from potential subsurface leakage points, and the detection of CO(2) surface fluxes by the monitoring network. The probability of leak detection is computed as the probability that the leakage signal is sufficient to increase the total flux beyond a statistically determined threshold. The methodology is illustrated for a highly idealized site monitored with CO(2) accumulation chamber measurements taken on a uniform grid. The TOUGH2 code is used to predict the spatial profile of surface CO(2) fluxes resulting from different leakage rates and different soil permeabilities. A response surface is fit to the TOUGH2 results to allow interpolation across a continuous range of values of permeability and leakage rate. The spatial distribution of leakage probability is assumed uniform in this application. Nonlinear, nonmonotonic relationships of network performance to soil permeability and network density are evident. In general, dense networks (with ～10-20 m between monitors) are required to ensure a moderate to high probability of leak detection.     

A meta-analysis of the published literature on the effectiveness of antimicrobial soaps

The goal of this research was to conduct a systematic quantitative analysis of the existing data in the literature in order to determine if there is a difference between antimicrobial and nonantimicrobial soaps and to identify the methodological factors that might affect this difference. Data on hand washing efficacy and experimental conditions (sample size, wash duration, soap quantity, challenge organism, inoculum size, and neutralization method) from published studies were compiled and transferred to a relational database. A total of 25 publications, containing 374 observations, met the study selection criteria. The majority of the studies included fewer than 15 observations with each treatment and included a direct comparison between nonantimicrobial soap and antimicrobial soap. Although differences in efficacy between antimicrobial and nonantimicrobial soap were small (～0.5-log CFU reduction difference), antimicrobial soap produced consistently statistically significantly greater reductions. This difference was true for any of the antimicrobial compounds investigated where n was >20 (chlorhexidine gluconate, iodophor, triclosan, or povidone). Average log reductions were statistically significantly greater (～2 log CFU) when either gram-positive or gram-negative transient organisms were deliberately added to hands compared with experiments done with resident hand flora (～0.5 log CFU). Our findings support the importance of using a high initial inoculum on the hands, well above the detection limit. The inherent variability in hand washing seen in the published literature underscores the importance of using a sufficiently large sample size to detect differences when they occur.     

Calcium Phosphate Scale Formation in Power Station Condensers Fed by Cooling Towers: A Case of When Not to Use Scaling Indices

Abstract

Unexpected fouling in condensers on Central Electricity Generating Board power stations operating on the river Trent in the UK in the 1970s prompted an extensive investigation of the phenomenon. Fouling was caused by deposition of calcium phosphate rich scale on the cooling water side. A fouling test rig was specially constructed to study the performance of different chemical treatments. The rig ran two tubes in parallel, one with undosed water, and the latter’s data sets from over 100 “control” tests were analyzed to determine the mechanism and rate of fouling. The trends could not be explained in terms of conventional scaling indices. Insight into the mechanism was provided by separating precipitation (loss from solution) and deposition (adhesion of some of the precipitated mass to the heated surface): scaling was found to be caused by the deposition of particulates in the recirculating cooling water, driven by the change in pH as the water went through the evaporative cooling stage. Quantitative expressions for fouling were generated from tests on 1.83?m long tubes and were found to give a reasonable prediction of the fouling behavior observed on a full sized (18.3?m long) single condenser tube on an operating condenser. The results indicated that recirculating water systems need to be approached very differently to once-through systems, and the use of scaling indices for such systems is not recommended.     

Sensitivity study of alanate hydride storage system

A successful metal hydride application is closely related to an optimized design of the storage hydrogen system. In previous studies, Hardy and Anton developed scoping and numerical models describing phenomena occurring during the loading process in an alanate storage system having the configuration of a cylindrical shell, tube and fin heat exchanger. In this paper, the numerical tool is used to evaluate the influence of varying the fin thickness and the number of heat exchanger tubes on both the loading and discharging processes. The objective is to evaluate the influence of the geometric parameters of these heat exchangers on the management of heat to be removed/supplied during the sorption process and thus optimize the loading/discharging times; while having the maximum possible volume for containing the hydride and the lightest weight of the storage system. Results showed that equipping the storage system with fins fitted to the heat exchanger tubes is the best design for efficient use of the hydride bed. In the absence of fins, a number of optimal tubes is determined, however, the hydrogen uptake rate is still lower than one obtained for the finned case and there is a reduction of volumetric and gravimetric storage capacities by comparison to the finned system.     

The influence of persistence and variability on the required solar radiation record length

An analysis was made of 17 years of total daily global solar radiation measurements made at St. Paul, Minnesota, a station located in the heart of North America and representative of a continental climate. The analysis was made with the objective of determining the degree of persistence in the solar radiation data and demonstrating the effect of persistence on the statistical analysis of these data.It is concluded that persistence varies through the year and that the characteristic time between independent observations ranges from slightly more than one day to just over three days. Two methods of estimating persistence revealed that some persistence results from daily serial correlation in the solar radiation data and that some persistence is due to interannual variability of monthly mean daily solar radiation.     

Interfacing cell-based assays in environmental scanning electron microscopy using dielectrophoresis

Development of the dielectrophoretic (DEP) live cell trapping technology and its interfacing with the environmental scanning electron microscopy (ESEM) is described. DEP microelectrode arrays were fabricated on glass substrate using photolithography and lift-off. Chip-based arrays were applied for ESEM analysis of DEP-trapped human leukemic cells. This work provides proof-of-concept interfacing of the DEP cell retention and trapping technology with ESEM to provide a high-resolution analysis of individual nonadherent cells.     

Dynamic analysis of drug-induced cytotoxicity using chip-based dielectrophoretic cell immobilization technology

Quantification of programmed and accidental cell death provides useful end-points for the anticancer drug efficacy assessment. Cell death is, however, a stochastic process. Therefore, the opportunity to dynamically quantify individual cellular states is advantageous over the commonly employed static, end-point assays. In this work, we describe the development and application of a microfabricated, dielectrophoretic (DEP) cell immobilization platform for the real-time analysis of cancer drug-induced cytotoxicity. Microelectrode arrays were designed to generate weak electro-thermal vortices that support efficient drug mixing and rapid cell immobilization at the delta-shape regions of strong electric field formed between the opposite microelectrodes. We applied this technology to the dynamic analysis of hematopoietic tumor cells that represent a particular challenge for real-time imaging due to their dislodgement during image acquisition. The present study was designed to provide a comprehensive mechanistic rationale for accelerated cell-based assays on DEP chips using real-time labeling with cell permeability markers. In this context, we provide data on the complex behavior of viable vs dying cells in the DEP fields and probe the effects of DEP fields upon cell responses to anticancer drugs and overall bioassay performance. Results indicate that simple DEP cell immobilization technology can be readily applied for the dynamic analysis of investigational drugs in hematopoietic cancer cells. This ability is of particular importance in studying the outcome of patient derived cancer cells, when exposed to therapeutic drugs, as these cells are often rare and difficult to collect, purify and immobilize.     

Spatial distribution of manganese in enamel and coronal dentine of human primary teeth

Emerging evidence indicates that excessive exposure to manganese (Mn) during the prenatal period and early childhood may result in neurodevelopmental deficits. However, accurate exposure biomarkers are not well established, limiting our understanding of exposure-response relationships over these susceptible periods of development. Naturally shed deciduous teeth are potentially a useful biomarker of environmental exposure to Mn. However, the uptake and distribution of Mn in human teeth has not been studied in detail.Mn distribution was measured at high resolution (~ 20 μm) in eight human primary teeth using laser ablation-inductively coupled plasma-mass spectrometry. A bio-imaging methodology was applied to construct detailed elemental maps of three incisors, and bone meal (NIST SRM 1486) was used to validate the analyses.The distribution of Mn in enamel and coronal dentine showed a distinct and reproducible pattern. In enamel, the ⁵⁵Mn:⁴³Ca ratio was highest at the outer edge of enamel (range = 0.57 to 4.74) for approximately 20-40 μm but was substantially lower in deeper layers (range = 0.005 to 0.013). The highest levels of Mn were observed in dentine immediately adjacent the pulpal margin (⁵⁵Mn:⁴³Ca range = 2.27 to 6.95). Importantly, a clearly demarcated high Mn zone was observed in dentine at the incisal end of the teeth. Using confocal laser scanning microscopy to visualize the neonatal line, this region was identified as being in the prenatally formed dentine.The high-resolution map of the spatial distribution of Mn in human primary teeth highlighted specific reproducible patterns of Mn distribution in enamel and coronal dentine.