Enzymatic degradation of polyacrylamide in aqueous solution with peroxidase and H2O2

Polyacrylamides are often used in water‐based hydraulic fracturing for natural gas and oil production. However, residual polymer remaining in the fractured rock can limit production. A novel approach for degrading partially hydrolyzed polyacrylamide (HPAM) was investigated using hydrogen peroxide and horseradish peroxidase (HRP). This sustainable HRP/H₂O₂ system degraded the polymer in solution, reducing its viscosity in both pure water and brine solutions. Molecular weight measurements confirmed that the viscosity reduction was due to a significant degradation of the polymer backbone and not primarily by other mechanisms such as amide hydrolysis or rearrangement, and so forth. The reduction in viscosity and molecular weight was first order with respect to H₂O₂ concentration. The kinetics of viscosity reduction and molecular weight are closely correlated which would allow the quicker and simpler viscosity method to help engineer future processes. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44560.     

Steam‐air blown bubbling fluidized bed biomass gasification (BFBBG): Multi‐scale models and experimental validation

During fluidized bed biomass gasification, complex gas‐solid mixing patterns and numerous chemical and physical phenomena make identification of optimal operating conditions challenging. In this work, a parametric experimental campaign was carried out alongside the development of a coupled reactor network model which successfully integrates the individually validated sub‐models to predict steady‐state reactor performance metrics and outputs. The experiments utilized an integrated gasification system consisting of an externally‐heated, bench‐scale, 4‐in., 5 kWth, fluidized bed steam/air blown gasifier fed with woody biomass equipped with a molecular beam mass spectrometer to directly measure tar species. The operating temperature (750–850°C) and air/fuel equivalence ratio (ER = 0–0.157) were independently varied to isolate their effects. Elevating temperature is shown to improve the char gasification rate and reduce tar concentrations. Air strongly impacts the composition of tar, accelerating the conversion of lighter polycyclic‐aromatic hydrocarbons into soot precursors, while also improving the overall carbon conversion. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1543–1565, 2017     

Microwave-specific heating of crystalline species in nuclear waste glass

The microwave heating of a crystal-free and a partially trevorite-crystallized nuclear waste glass simulant was evaluated. Our results show that a 500-mg monolith of partially crystallized waste glass can be heated from room temperature to above 1600°C within 2 minutes using a single-mode, highly focused, 2.45-GHz microwave, operating at 300 W. Using X-ray diffraction measurements, we show that trevorite is no longer detectable after irradiation and thermal quenching. When a crystal-free analog of the same waste glass simulant composition was exposed to the same microwave radiation, it could not be heated above 450°C regardless of the heating time. The reduction in crystalline content achieved by selectively heating spinels in the presence of glass suggests that microwave-specific heating should be further explored as a technique for remediating crystal accumulation in a glass melt.     

High-pressure phase equilibria for the synthesis of ionic liquids in compressed CO2 for 1-hexyl-3-methylimidazolium bromide with 1-bromohexane and 1-methylimidazole

The use of carbon dioxide in the synthesis of ionic liquids (ILs) has many advantages over conventional solvents. Here, the high-pressure phase equilibria (including CO₂ solubility, volume expansion, and mixture critical points) are measured and modeled for the system involved in the synthesis of a model imidazolium ionic liquid 1-hexyl-3-methylimidazolium bromide ([HMIm][Br]) from 1-bromohexane and 1-methylimidazole. The global phase behavior of 1-methylimidazole was investigated and found to be a Type V system (or potentially IV) from the classification of Scott and van Konynenburg with regions of vapor–liquid equilibrium, vapor–liquid–liquid equilibrium, liquid–liquid equilibrium, an upper and lower critical endpoint and mixture critical points. The solubility and volume expansion of CO₂ in 1-methylimidazole, 1-bromohexane, a 1:1 mixture of 1-methylimidazole and 1-bromohexane and [HMIm][Br] was determined at 313.15 K and 333.15 K for pressures ranging from 10 to 160 bar. The solubility of CO₂ and the volume expansion increases in the order of [HMIm][Br]  1-methylimidazole < 1:1 mixture of reactants < 1-bromohexane. The Peng–Robinson equation of state with van der Waals 2-parameter mixing rules was used with estimated critical properties to well correlate the vapor–liquid equilibrium. The results have important ramifications on the kinetics and process constraints of an actual IL synthesis with CO₂.     

Global phase behavior of imidazolium ionic liquids and compressed 1,1,1,2‐tetrafluoroethane (R‐134a)

Novel processes involving ionic liquids with refrigerant gases have recently been developed. Here, the complete global phase behavior has been measured for the refrigerant gas, 1,1,1,2‐tetrafluoroethane (R‐134a) and 1‐n‐alkyl‐3‐methyl‐imidazolium ionic liquids with the anions hexafluorophosphate [PF₆], tetrafluoroborate [BF₄] and bis(trifluoromethylsulfonyl)imide [Tf₂N] from ～0°C to 105°C and to 33 MPa. All of the systems studied were Type V from the classification scheme of Scott‐van Konynenburg with regions of vapor‐liquid equilibrium, miscible/critical regions, vapor‐liquid‐liquid equilibrium, and upper and lower critical endpoints (UCEP and LCEP). The effect of the alkyl chain length has been investigated, for ethyl‐([EMIm]), n‐butyl‐([BMIm]), and n‐hexyl‐([HMIm]). With increasing chain length, the temperature of the lower critical end points increases and pressure at the mixture critical points decrease. With a common cation, the temperature of the LCEP increased and the mixture critical point pressures decreased in the order of [BF₄], [PF₆], and [Tf₂N]. © 2008 American Institute of Chemical Engineers AIChE J, 2009     

Inhibitors of the salicylate synthase (MbtI) from Mycobacterium tuberculosis discovered by high-throughput screening

A simple steady‐state kinetic high‐throughput assay was developed for the salicylate synthase MbtI from Mycobacterium tuberculosis, which catalyzes the first committed step of mycobactin biosynthesis. The mycobactins are small‐molecule iron chelators produced by M. tuberculosis, and their biosynthesis has been identified as a promising target for the development of new antitubercular agents. The assay was miniaturized to a 384‐well plate format and high‐throughput screening was performed at the National Screening Laboratory for the Regional Centers of Excellence in Biodefense and Emerging Infectious Diseases (NSRB). Three classes of compounds were identified comprising the benzisothiazolones (class I), diarylsulfones (class II), and benzimidazole‐2‐thiones (class III). Each of these compound series was further pursued to investigate their biochemical mechanism and structure–activity relationships. Benzimidazole‐2‐thione 4 emerged as the most promising inhibitor owing to its potent reversible inhibition.     

A Single Molecular Beacon Probe Is Sufficient for the Analysis of Multiple Nucleic Acid Sequences

Molecular beacon (MB) probes are dual‐labeled hairpin‐shaped oligodeoxyribonucleotides that are extensively used for real‐time detection of specific RNA/DNA analytes. In the MB probe, the loop fragment is complementary to the analyte: therefore, a unique probe is required for the analysis of each new analyte sequence. The conjugation of an oligonucleotide with two dyes and subsequent purification procedures add to the cost of MB probes, thus reducing their application in multiplex formats. Here we demonstrate how one MB probe can be used for the analysis of an arbitrary nucleic acid. The approach takes advantage of two oligonucleotide adaptor strands, each of which contains a fragment complementary to the analyte and a fragment complementary to an MB probe. The presence of the analyte leads to association of MB probe and the two DNA strands in quadripartite complex. The MB probe fluorescently reports the formation of this complex. In this design, the MB does not bind the analyte directly; therefore, the MB sequence is independent of the analyte. In this study one universal MB probe was used to genotype three human polymorphic sites. This approach promises to reduce the cost of multiplex real‐time assays and improve the accuracy of single‐nucleotide polymorphism genotyping.     

Advanced Postirradiation Characterization of Nuclear Fuels Using Pulsed Neutrons

Methods for postirradiation characterization of bulk (cm³) irradiated materials or even spent nuclear fuels are sparse due to their extremely radioactive nature. While several methods exist to characterize smaller volumes (<?1 mm³) of such samples, selecting these volumes from larger samples is challenging. X-ray-based methods are prohibitive due to the strong γ-radiation from the sample flooding the detectors. Neutron-based methods available in the proximity of irradiation reactors allow for thermal neutron radiography or computed tomography using a small reactor source, but one cannot assess isotope distributions or microstructural features such as phases, texture, or strain from diffraction measurements due to flux limitations. We present herein a pathway to provide pulsed neutron characterization of bulk irradiated samples using time-of-flight neutron diffraction for microstructural characterization and energy-resolved neutron imaging for assessment of isotopic densities and distributions. Ultimately, laser-driven pulsed neutron sources may allow deployment of these techniques pool-side at irradiation reactors.