On the thermal conductivity of bimodal SiC/A356 composites fabricated via powder metallurgy route

The present study investigates the thermal conductivity of bimodal SiC particulate distribution in aluminum matrix composites fabricated via powder metallurgy route. The effects of the SiC_p reinforcement size distribution and processing parameters such as sintering time and temperature on the thermal conductivity have been examined. The Box–Behnken experimental array was employed to identify the effects of selected variables on the thermal conductivity of the composite. A reasonable augmentation in the thermal conductivity was observed with an increase in sintering time and %volume fraction of fine SiC particulates. It has been demonstrated that the matrix doped with fine SiC particulates (37?µm) occupied interstitial positions and formed continuous SiC–matrix network resulting in minimizing the micropores that contributed for good thermal conductivity, that is, 235?W/mK. Scanning electron microscopy (SEM) and x-ray diffraction (XRD) were conducted to evaluate the microstructure architecture and interfacial phase formation.     

Premarin Reduces Neurodegeneration and Promotes Improvement of Function in an Animal Model of Spinal Cord Injury

Spinal cord injury (SCI) causes significant mortality and morbidity. Currently, no FDA-approved pharmacotherapy is available for treating SCI. Previously, low doses of estrogen (17β-estradiol, E2) were shown to improve the post-injury outcome in a rat SCI model. However, the range of associated side effects makes advocating its therapeutic use difficult. Therefore, this study aimed at investigating the therapeutic efficacy of Premarin (PRM) in SCI. PRM is an FDA-approved E2 (10%) formulation, which is used for hormone replacement therapy with minimal risk of serious side effects. The effects of PRM on SCI were examined by magnetic resonance imaging, immunofluorescent staining, and western blot analysis in a rat model. SCI animals treated with vehicle alone, PRM, E2 receptor antagonist (ICI), or PRM + ICI were graded in a blinded way for locomotor function by using the Basso–Beattie–Bresnahan (BBB) locomotor scale. PRM treatment for 7 days decreased post-SCI lesion volume and attenuated neuronal cell death, inflammation, and axonal damage. PRM also altered the balance of pro- and anti-apoptotic proteins in favor of cell survival and improved angiogenesis and microvascular growth. Increased expression of estrogen receptors (ERs) ERα and ERβ following PRM treatment and their inhibition by ER inhibitor indicated that the neuroprotection associated with PRM treatment might be E2-receptor mediated. The attenuation of glial activation with decreased inflammation and cell death, and increased angiogenesis by PRM led to improved functional outcome as determined by the BBB locomotor scale. These results suggest that PRM treatment has significant therapeutic implications for the improvement of post-SCI outcome.     

Trace-based mobility modeling for multi-hop wireless networks

Realistic and scenario-dependent mobility modeling is crucial for the reliable performance evaluation of multi-hop networks. In the last decade, a significant number of synthetic mobility models have been proposed. However, only a few of these models have been validated by realistic movement traces. In the last few years, several of such traces have been collected, analyzed, and made available to the community. This paper provides a comprehensive and up-to-date survey of (1) available movement traces, (2) modeling/analyses of these traces, and (3) synthetic mobility models. The focus of the paper is on mobility traces/models that include position information. The contribution of this paper is to summarize the research that has been done in the area of mobility modeling over the last few years and present challenges for future work.     

Study of in vivo tumor state and response to therapy by analysis of DNA distribution

Comparative studies of cefamandole and cephalothin were carried out in 32 cancer patients. After rapid intravenous injection of 1 gm cefamandole or cephalothin, the peak mean serum concentrations in 11 patients achieved at 0.25 hr were 103.4 mcg/ml and 56.7 mcg/ml, respectively. Except at 6 hr, the serum concentration of cefamandole was higher (p less than 0.05) at all times. The terminal half-lives (t 1/2) were similar, being 1.2 hr for cefamandole and 1.0 hr for cephalothin. Cefamandole, 1 gm intramuscularly, induced a peak mean serum concentration of 26.6 mcg/ml at 1 hr, with a slow decay. Intermittent cefamandole (2 gm intravenously every 6 hr) induced very high mean serum concentrations (7 patients), but at 4 hr the concentrations were similar to those after 1 gm intravenously. Per cent of urinary excretion was similar for both drugs regardless of dose and mode of administration. Continuous-infusion cefamandole or cephalothin (2 gm loading followed by 2 gm every 6 hr) in 14 patients showed consistently higher serum concentrations for cefamandole (p less than 0.05) over a 5-day period. There was no evidence of drug accumulation in the multiple-dose studies. Both the single- and multiple-dose schedules were well tolerated.     

Effect of butylated hydroxyanisole on catalase activity and malondialdehyde content in aging Zaprionus paravittiger (diptera)

Catalase activity and malondialdehyde (MDA) content were measured in whole body and mitochondrial homogenates of the banana fruit fly, Zaprionus paravittiger, fed on control and butylated hydroxyanisole (BHA, 10 mM) mixed diets. Catalase activity increased during the reproductive period and decreased thereafter with age. However, the MDA content increased with advancing age in both sexes. In general, females exhibited higher catalase activity and lower MDA content as compared to their male counterparts. BHA feeding increased catalase activity significantly during all age intervals in both sexes. Mitochondrial fractions had lower catalase activity and lower MDA content than whole body homogenates. However, the pattern of changes was similar in both homogenates with age as well as on antioxidant feeding. These results suggest that BHA strengthens the defense mechanism of the insects by increasing catalase activity and reducing MDA content which may be responsible for increased longevity of insects.     

Complications of abdominal right-thoracic (Ivor Lewis) esophagectomy

Esophageal resection and reconstruction are associated with significant operative and postoperative morbidity and mortality. Careful evaluation of the patient's cardiopulmonary status; proper preparation of the patient with smoking cessation, exercise, and cardiopulmonary rehabilitation; assessment of the stage of disease; selection of a suitable operative technique; and meticulous attention to technical details help reduce the incidence of complications and ensure a successful outcome in this technically challenging procedure.     

Fracture mechanics weight functions in three dimensions: Subtraction of fundamental fields

A new procedure is presented for the determination of the fracture mechanics weight functions that are required for the evaluation of stress intensity factors in cracked solids. The procedure can be used with a standard three-dimensional boundary element code. The weight functions are proportional to the displacements on the boundary of the solid when the only loading is a pair of self-equilibrated point forces at the crack front. In previous work, the highly singular crack-tip fields that this loading produces have been modelled by replacing the crack front by a cylindrical cavity with appropriate displacement boundary conditions on the cavity walls. It is shown here that results are dependent on the cavity radius and that convergence of the results cannot be guaranteed. An alternative procedure, based on the substraction of fundamental fields (SFF), is demonstrated herein. The high-order singularities are removed from the field before the reduced problem is solved numerically using a standard boundary element method. Since the reduced problem is equivalent to an unloaded crack in a solìd subjected to boundary tractions, the usual quarter-point displacement elements and quarter-point traction singular elements can be used to improve the accuracy. Weight functions, so obtained, are used to evaluate stress intensity factors as a function of position on the crack front for a straight-fronted crack in a rectangular bar subjected to various loadings. Both edge and central cracks are considered and the validity of the technique is demonstrated by comparing the results with previously published values.