Weber’s law based multi-level convolution correlation features for image retrieval

Multimedia Tools and Applications - Weber’s law reveals the relationship between human perception and perceptual stimuli. Inspired by the theory, this paper designs a multi-level convolution...     

A hybrid chaotic blowfish encryption for high-resolution satellite imagery

Multimedia Tools and Applications - In this article, we have designed a new information confidentiality mechanism based on the combination of Blowfish encryption algorithm along with Henon and Chen...     

Flow‐based electromagnetic‐type energy harvester using microplanar coil for IoT sensors application

Battery is the sole power source for Internet of thing (IoT) sensors. Due to limited shelf life, the batteries are required to be replaced intermittently. This periodic replacement of batteries is inflated in terms of both logistics and time. This article illustrates conceptual design, development, and characterization of a flow‐based electromagnetic‐type energy harvester (F‐EH) using microplanar coil for IoT sensors application. The F‐EH converts hydro energy into useful electrical energy utilizing electromagnetic transduction mechanism. The microfabrication and macrofabrication techniques adopted to manufacture harvester's components are presented. The F‐EH has been successfully characterized by laboratory scale experimental flow test loop commissioned for this work. Experimentation with associated uncertainty analysis prevails that at a matching impedance, the F‐EH can generate a 686 μW of maximum power at an operating flow rate of 12 L/min with an uncertainty of 8.1%.     

Coherent control of symmetric and asymmetric diffraction grating via relative phase

ABSTRACT

We present a theoretical model to realize the symmetric and asymmetric diffraction grating in a four-level atomic medium. The proposed atomic medium follows a double lambda configuration where four fields interact with it. We get control over symmetric and asymmetric behavior of the diffraction grating by manipulating the relative phase of the fields. Interestingly, the symmetric and asymmetric diffraction grating become prominent when the vortex beam is used instead of the plane wave. Enhanced first, second, and third-order diffraction gratings are achieved via the vortex beam. Further, we find control over asymmetric diffraction gratings by the relative phase of the fields. Coherent control of asymmetric diffraction grating in negative and positive diffracted angles is also achieved via the relative phase.     

DEA window analysis and Malmquist index to assess energy efficiency and productivity in Jordanian industrial sector

This research evaluates the energy efficiency and productivity growth in the industrial sector over the period of 1999 till 2013 using data envelopment analysis (DEA). Two cases are analyzed; in the first case (GVA), the output is the gross value added, whereas two outputs are considered in the second case (GCO), CO₂ emission and GVA. Five key input factors are considered in both cases. From DEA window analysis, the technical inefficiency (TIE) values are zeros in windows (2001–2005) till (2003–2007), (2007–2011), and (2008–2012), whereas the pure technical inefficiency (PTIE) values are zeros in windows (1999–2003) till (2003–2007). Finally, the scale inefficiency (SIE) values are zeros in windows (2001–2005) till (2003–2007). These results help policy planners on how to better utilize resources and management efficiency over time and guide operational managers when to increase or decrease the scale. Moreover, the averages of inefficiency values in the GVA case are smaller than their corresponding in the GCO case, which indicates the negative effect of CO₂ emission on efficiency. Further, Malmquist index is estimated for three 5-year energy plans. The productivity index is found less than one for the third plan (2009–2013), which indicates a decrease productivity growth. In conclusions, research results provide valuable support when assessing the progress of energy efficiency and productivity in industrial sector.     

Influence of additive materials on the roughness of AISI D2 steel in electrical discharge machining (EDM) environment

The quality of the machined surface resulted from the electrical discharge machining (EDM) environment is not efficient according to the previous studies. One of the significant problems is the impedance of dielectric fluid, where it is contributing to focusing the plasma channel in a limited area. Hence, this behavior leads to appearing deep craters on the machined zone. The researchers have attempted to enhance the average of surface roughness by employing powder particles or surfactant as the additive materials in the dielectric fluid. Unfortunately, these studies did not present a comparison between these additive materials in this environment. Therefore, the present study aims to compare the performance of the average of surface roughness (R_a) for AISI D2 steel by utilizing Nano chromium powder (NCP) and Span-20. The present work has proved that the behavior of the average of surface roughness for this steel is dropping at the maximum level of Nano chromium powder concentration and pulse duration as compared to the behavior with the Span-20. Moreover, the best roughness was produced by this steel with Nano chromium powder at 2 g/L and 20 μs for this powder and the pulse duration.     

Synergistic effect of nanoparticles and Thalassospira sp. isolated from Bahregan area in biodegradation of oil sludge

Oil sludge is obtained from the contaminated site of Bahregan area in the Persian Gulf in Iran. Chemotaxis was used for the isolation of alkane-degrading bacteria from oil sludge and the alk genes were determined with specific primers. bac1 identified in Thalassospira was selected as a powerful strain for biodegradation of oil sludge. Biodegradation of oil sludge by bac1 in the presence of nanoparticles was investigated by GC-MS analysis. Synergistic effect of Fe₂O₃ and Fe₃O₄ nanoparticles on bacteria increases the biodegradation of oil sludge and produces cyclosiloxane compound which is used in the field of medicine; however, the Thalassospira reduced its toxicity in the environment.     

Castor oil-based polyurethane coatings containing benzyl triethanol ammonium chloride: synthesis,characterization, and biological properties

In the present work, benzyl triethanol ammonium chloride (BTEAC) was employed as a reactive bactericidal additive for preparing of polyurethane coatings. In this regard, castor oil as a renewable resource-based polyol, polyethylene glycol (PEG1000), and BTEAC were reacted with toluene diisocyanate. Physical, mechanical, and thermal characteristics as well as biocompatibility and antibacterial properties of polyurethanes were evaluated. The prepared polyurethanes showed two-phase structure with soft and hard segments glass transition temperature transitions in the range of 18–70 and 85–153 °C, respectively. Initial modulus and tensile strength were improved for coatings with higher BTEAC content, while elongation at break and thermal stability were decreased. Hydrophilicity of coatings was increased for polyurethanes based on higher content of BTEAC and PEG1000. Polyurethanes with higher BTEAC content showed better cytocompatibility for mouse L929 fibroblast cells. Moreover, coatings with higher hydrophilicity and BTEAC content displayed superior antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria.     

Polyhydroxybutyrate/chitosan/bioglass nanocomposite as a novel electrospun scaffold: fabrication and characterization

Scaffolds and their features play a central role in tissue engineering; so this study is based on the production of a series of electrospun PHB/Chitosan/nBG nanocomposite scaffolds with 9 wt% polyhydroxybutyrate, 10, 15 and 20 wt% chitosan and 7.5, 10 and 15 wt% nanobioglass (nBG). Electrospinning process was performed with optimal conditions of spinning machine including voltage of 16 kV, syringe-collector spacing of 16 cm, and output rate of 1 µl per hour. The developed phases and the formation of chemical bonds between ceramic and polymer bands were studied through XRD and FTIR analyses. The FE-SEM and TEM analyses showed uniform morphology of nanofibers and dispersion of bioglass nanoparticles in the fiber structure. The presence of 10 wt% bioglass nanoparticles and 15 wt% chitosan increased the tensile strength of fibers to 3.42 MPa, which was about four times greater than strength of control sample (pure PHB). The developed fibers were kept 28 days in SBF solution and 60 days in PBS solution to assess their bioactivity and biodegradability. The results showed that the presence of bioglass nanoparticles leads to a dramatic increase in absorption of calcium and phosphorus ions and weight loss of scaffold. The developed scaffold can be used for bone and teeth tissue engineering applications.