Increasing ethylene production as a high value hydrocarbon in Fischer-Tropsch (FT) reactor: A concept reactor for combining FT with oxidative coupling of methane

The paper proposes a concept configuration of reactors for coupling OCM and FTS, and presents systematic simulation results. FTS section is a combination of fixed bed and membrane fluidized bed reactor, and feed of the FT reactor is supplied by OCM. The reactor configuration is compared with the consecutive reactors of OCM and one fixed bed FT reactor. Effects of CH₄/O₂ ratio, percent of N₂ in the feed, contact time, and input temperature on the yield of ethylene and valuable hydrocarbons are studied. The results show that compared with one FTS reactor configuration, the dual FTS reactor configuration is more effective and thus gives much higher product yields. Furthermore, a main decrease is observed in the formation of CO₂ and CH₄.     

Correct Prediction of the Vibration Behavior of a High Power Ultrasonic Transducer by FEM Simulation

This paper presents a study on three types of finite element analyses of high power ultrasonic transducer by using the finite element commercial software called ANSYS. The transducer geometry was treated as a 2D axi- symmetric model, 3D quart and full 3D model. For all of the simulations the modeled transducer was used in modal analysis and harmonic solutions to understand its mechanical behavior and its natural frequency. A comparison was made between each type of modeling and experimental results. This comparison allows the parameters of FEM models to be iteratively adjusted and optimized and also leads to selection of the best modeling type. The achieved FEM results exhibited a remarkably high predictive potential of ANSYS in modeling and simulation and allowed control on the design and on the vibration behavior of the high power ultrasonic transducer.     

Palyno‐morphological characteristics of gymnosperm flora of pakistan and its taxonomic implications with LM and SEM methods

The present study is intended to assess gymnosperms pollen flora of Pakistan using Light Microscope (LM) and Scanning Electron Microscopy (SEM) for its taxonomic significance in identification of gymnosperms. Pollens of 35 gymnosperm species (12 genera and five families) were collected from its various distributional sites of gymnosperms in Pakistan. LM and SEM were used to investigate different palyno‐morphological characteristics. Five pollen types (i.e., Inaperturate, Monolete, Monoporate, Vesiculate‐bisaccate and Polyplicate) were observed. Six In equatorial view seven types of pollens were observed, in which ten species were sub‐angular, nine species were Traingular, six species were Perprolate, three species were Rhomboidal, three species were semi‐angular, two species were rectangular and two species were prolate. While five types of pollen were observed in polar view, in which ten species were Spheroidal, nine species were Angular, eight were Interlobate, six species were Circular, two species were Elliptic. Eighteen species has rugulate and 17 species has faveolate ornamentation. Eighteen species has verrucate and 17 have gemmate type sculpturing. The data was analysed through cluster analysis. The study showed that these palyno‐morphological features have significance value in classification and identification of gymnosperms. Based on these different palyno‐morphological features, a taxonomic key was proposed for the accurate and fast identifications of gymnosperms from Pakistan.     

Bimetallic Zn/Ag doped polyurethane spider net composite nanofibers: A novel multipurpose electrospun mat

The objective of this study was to develop a new class of bimetallic ZnO/Ag embedded polyurethane multi-functional nanocomposite by a straightforward approach. Bimetallic nanomaterials, composed of two unlike metal elements, are of greater interest than the monometallic materials because of their improved characteristics. In the present study the bimetallic composite was prepared using sol–gel via the facile electrospinning technique. The utilized sol–gel was composed of zinc oxide, silver and poly(urethane). The physicochemical properties of as-spun composite mats were determined by X-ray diffraction pattern, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and transmission electron microscopy. The antibacterial activity was tested using Escherichia coli as model organism. The antibacterial test showed that ZnO:Ag/polyurethane composite possesses superior antimicrobial activity than pristine PU and ZnO/PU hybrids. Furthermore, our results illustrate that the synergistic effect of ZnO and Ag resulted in the advanced antimicrobial action of bimetallic ZnO/Ag composite mat. The viability and proliferation properties of NIH 3T3 mouse fibroblast cells on the ZnO:Ag/polyurethane composite nanofibers were analyzed by in vitro cell compatibility test. Our results indicated the non-cytotoxic behavior of bimetallic ZnO:Ag/polyurethane nanofibers towards the fibroblast cell culture. In summary, novel ZnO:Ag/polyurethane composite nanofibers which possess large surface to volume ratio with excellent antimicrobial activity were fabricated. The unique combination of ZnO and Ag nanoparticles displayed potent bactericidal effect due to a synergism. Hence the electrospun bimetallic composite indicates the huge potential in water filtration, clinical and biomedical applications.     

Two-Variable Refined Plate Theory for Thermoelastic Bending Analysis of Functionally Graded Sandwich Plates

The thermoelastic bending analysis of functionally graded sandwich plates using the two-variable refined plate theory is presented in this paper. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, has strong similarity with classical plate theory in many aspects, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The sandwich plate faces are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity, Poisson's ratio of the faces, and thermal expansion coefficients are assumed to vary according to a power law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Several kinds of sandwich plates are used taking into account the symmetry of the plate and the thickness of each layer. The influences played by the transverse shear deformation, thermal load, plate aspect ratio, and volume fraction distribution are studied. Numerical results for deflections and stresses of functionally graded metal–ceramic plates are investigated. It can be concluded that the proposed theory is accurate and simple in solving the thermoelastic bending behavior of functionally graded plates.     

Synthesis,characterization, and cell viability of bifunctional medical-grade polyurethane nanofiber: Functionalization by bone inducing and bacteria ablating materials

There is an extensive possibility of improving characteristics of fibers used in hard tissue engineering, being hydrophobic and less osteoconductive, resulting in the dynamic growth of new tissues. The current work focuses on the fabrication of nanofibers incorporated with titanium dioxide (TiO₂) ''as osteoconductive'' and silver (Ag) ''as self-healing'' nanoparticles (NPs). The incorporation of AgNO₃ by in situ method not only helped to impart the antibacterial activity but also changed the contact angle from 81 ± 03° in the case of pristine nanofibers to 74 ± 03°, 61 ± 03°, 50 ± 08°, and 39 ± 1.1°, in the composite scaffolds containing 0.01, 0.03, 0.05, and 0.07 M of Ag salts. The incubation in simulated body fluid at 37°C to induce mineralization on nanofiber scaffolds indicated Ca and P crystals' formation. The antibacterial activity showed significantly more toxicity toward E. coli (8.3 ± 0.9 mm) than S. aureus (1.2 ± 0.1 mm). Biocompatibility studies using MTT assay on the pre-osteoblasts showed that both TiO₂ and Ag NPs present in the nanofibers are non-toxic to the bone-like cells. However, results show that a higher concentration of Ag NPs (i.e., 0.07 M) is toxic to cells growing. Finally, all the results suggest that the nanofiber scaffolds have considerable scope for future bone tissue engineering materials.     

Oxidative solution polymerization of aniline hydrochloride onto electrospun nanofibers mats of polylactic acid: Preparation method and characterization

In this work, we present the preparation of polylactic acid (PLLA)/polyaniline (PANI) conductive composite nanofibers mats. They are prepared by bulk oxidative solution polymerization of PANI onto electrospun non‐woven fibers mats of PLLA. The PANI ratio in the composite is about 70%w/w. Scanning electron microscopy (SEM) shows that PLLA nanofibers are randomly oriented, beads free with diameters of 186 ± 85 nm, The PLLA/PANI composite nanofibers diameter values are 518 ± 128 nm with a good adherence between PANI and PLLA nanofibers. DSC and XRD measurements reveal an amorphous structure of the electrospun PLLA fibers due to the rapid evaporization of the solvent. FTIR and UV–vis spectra reflect good mutual interactions between PANI and PLLA chains. The DC‐conductivities ( ) far better than other published ones for similar composites prepared by bulk oxidative solution polymerization of PANI onto other electrospun nanofiber mats or with electrospun nanofibers from a solution mixture of PLLA and PANI. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41618.     

Plasmodium species aware based quantification of malaria parasitemia in light microscopy thin blood smear

Malaria is a serious worldwide disease, caused by a bite of a female Anopheles mosquito. The parasite transferred into complex life round in which it is grown and reproduces into the human body. The detection and recognition of Plasmodium species are possible and efficient through a process called staining (Giemsa). The staining process slightly colorizes the red blood cells (RBCs) but highlights Plasmodium parasites, white blood cells and artifacts. Giemsa stains nuclei, chromatin in blue tone and RBCs in pink color. It has been reported in numerous studies that manual microscopy is not a trustworthy screening technique when performed by nonexperts. Malaria parasites host in RBCs when it enters the bloodstream. This paper presents segmentation of Plasmodium parasite from the thin blood smear points on region growing and dynamic convolution based filtering algorithm. After segmentation, malaria parasite classified into four Plasmodium species: Plasmodium falciparum, Plasmodium ovale, Plasmodium vivax, and Plasmodium malaria. The random forest and K‐nearest neighbor are used for classification base on local binary pattern and hue saturation value features. The sensitivity for malaria parasitemia (MP) is 96.75% on training and testing of the proposed approach while specificity is 94.59%. Beside these, the comparisons of the two features are added to the proposed work for classification having sensitivity is 83.60% while having specificity is 94.90% through random forest classifier based on local binary pattern feature.     

Multi-reservoir Operation Rules: Multi-swarm PSO-based Optimization Approach

Reservoir operation rules are intended to help an operator so that water releases and storage capacities are in the best interests of the system objectives. In multi-reservoir systems, a large number of feasible operation policies may exist. System engineering and optimization techniques can assist in identifying the most desirable of those feasible operation policies. This paper presents and tests a set of operation rules for a multi-reservoir system, employing a multi-swarm version of particle swarm optimization (MSPSO) in connection with the well-known HEC-ResPRM simulation model in a parameterization–simulation–optimization (parameterization SO) approach. To improve the performance of the standard particle swarm optimization algorithm, this paper incorporates a new strategic mechanism called multi-swarm into the algorithm. Parameters of the rule are estimated by employing a parameterization–simulation–optimization approach, in which a full-scale simulation model evaluates the objective function value for each trial set of parameter values proposed with an efficient version of the particle swarm optimization algorithm. The usefulness of the MSPSO in developing reservoir operation policies is examined by using the existing three-reservoir system of Mica, Libby, and Grand Coulee as part of the Columbia River Basin development. Results of the rule-based reservoir operation are compared with those of HEC-ResPRM. It is shown that the real-time operation of the three reservoir system with the proposed approach may significantly outperform the common implicit stochastic optimization approach.     

A robust unified approach to analyzing methylation and gene expression data

Microarray technology has made it possible to investigate expression levels, and more recently methylation signatures, of thousands of genes simultaneously, in a biological sample. Since more and more data from different biological systems or technological platforms are being generated at an incredible rate, there is an increasing need to develop statistical methods that are applicable to multiple data types and platforms. Motivated by such a need, a flexible finite mixture model that is applicable to methylation, gene expression, and potentially data from other biological systems, is proposed. Two major thrusts of this approach are to allow for a variable number of components in the mixture to capture non-biological variation and small biases, and to use a robust procedure for parameter estimation and probe classification. The method was applied to the analysis of methylation signatures of three breast cancer cell lines. It was also tested on three sets of expression microarray data to study its power and type I error rates. Comparison with a number of existing methods in the literature yielded very encouraging results; lower type I error rates and comparable/better power were achieved based on the limited study. Furthermore, the method also leads to more biologically interpretable results for the three breast cancer cell lines.