pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

Biofilm and Small Colony Variants—An Update on Staphylococcus aureus Strategies toward Drug Resistance

Recently, the drawbacks arising from the overuse of antibiotics have drawn growing public attention. Among them, drug-resistance (DR) and even multidrug-resistance (MDR) pose significant challenges in clinical practice. As a representative of a DR or MDR pathogen, Staphylococcus aureus can cause diversity of infections related to different organs, and can survive or adapt to the diverse hostile environments by switching into other phenotypes, including biofilm and small colony variants (SCVs), with altered physiologic or metabolic characteristics. In this review, we briefly describe the development of the DR/MDR as well as the classical mechanisms (accumulation of the resistant genes). Moreover, we use multidimensional scaling analysis to evaluate the MDR relevant hotspots in the recent published reports. Furthermore, we mainly focus on the possible non-classical resistance mechanisms triggered by the two important alternative phenotypes of the S. aureus, biofilm and SCVs, which are fundamentally caused by the different global regulation of the S. aureus population, such as the main quorum-sensing (QS) and agr system and its coordinated regulated factors, such as the SarA family proteins and the alternative sigma factor σB (SigB). Both the biofilm and the SCVs are able to escape from the host immune response, and resist the therapeutic effects of antibiotics through the physical or the biological barriers, and become less sensitive to some antibiotics by the dormant state with the limited metabolisms.     

New syntheses of pyrazolo[3,4-d]pyrimidine,pyrazolo[3,4-d]pyridazine,isoindolinedione and pyrazole derivatives

Phenacylmalononitriles 2 react with hydrazines, acetic-hydrochloric acid and with diazotised primary aromatic amines to afford phenacylpyrazole ( 5a,b ), aminofurans ( 6a,b ) and aminopyrazole derivatives ( 3a,d ) respectively. The synthesised derivatives ( 3d, 6a ) were the key materials for the synthesis of isoindolinedione, ( 7a – c ) pyrazolopyrimidine ( 9, 10 ), and pyrazolopyridazine derivatives ( 11 ). The structures of the newly synthesised heterocycles were established on the basis of elemental analyses and spectral data besides synthesis via other routes.     

Recent Developments in Predicting Impact and Shock Sensitivities of Energetic Materials （英）

Empirical, quantum mechanical and artificial neural network methods are three usual methods in recent years that were used to predict sensitivity of different classes of high explosives. Some recent developments in predicting sensitivity by various methods are reviewed and discussed for various classes of energetic materials.     

Evaluation of alumina reinforced oil fly ash composites prepared by spark plasma sintering

The thermomechanical behavior of micro/nano-alumina (Al₂O₃) ceramics reinforced with 1-5 wt.% of acid-treated oil fly ash (OFA) was investigated. Composites were sintered using spark plasma sintering (SPS) technique at a temperature of 1400°C by applying a constant uniaxial pressure of 50 MPa. It was evaluated that the fracture toughness of micro- and nanosized composites improved in contrast with the monolithic alumina. Highest fracture toughness value of 4.85 MPam^1/2 was measured for the nanosized composite reinforced with 5 wt.% OFA. The thermal conductivity of the composites (nano-/microsized) decreased with the increase in temperature. However, the addition of OFA (1-5 wt.%) in nanosized alumina enhanced the thermal conductivity at an evaluated temperature. Furthermore, a minimum thermal expansion value of 6.17 ppm*K⁻¹ was measured for nanosized Al₂O₃/5 wt.% OFA composite. Microstructural characterization of Al₂O₃-OFA composites was done by x-ray diffraction and Raman spectroscopy. Oil fly ash particles were seen to be well dispersed within the alumina matrix. Moreover, the comparative analysis of the nano-/microsized Al₂O₃/OFA composites shows that the mechanical and thermal properties were improved in nanosized alumina composites.     

Synthesis of Architectural-Cubic Porous Silicon by Electroless Stain Etching in V2O5 and HF Solution

Silicon - Porous silicon (PSi) samples were prepared via electroless stain etching of silicon substrates in HF using V2O5 as an oxidant and ethanol as a surfactant for different etching times. The...     

A Modified Method for the Determination of N‐Nitrosodiethanolamine in Coconut Diethanolamide Using HPLC with Dual‐Wavelength UV–Vis Detector

A simple and novel method based on high‐performance liquid chromatography with dual‐wavelength ultraviolet detection at 234 and 254 nm has been developed for the determination of underivatized N‐nitrosodiethanolamine in coconut diethanolamide. The correlation coefficient obtained shows that the method is correct.     

Increasing ethylene production as a high value hydrocarbon in Fischer-Tropsch (FT) reactor: A concept reactor for combining FT with oxidative coupling of methane

The paper proposes a concept configuration of reactors for coupling OCM and FTS, and presents systematic simulation results. FTS section is a combination of fixed bed and membrane fluidized bed reactor, and feed of the FT reactor is supplied by OCM. The reactor configuration is compared with the consecutive reactors of OCM and one fixed bed FT reactor. Effects of CH₄/O₂ ratio, percent of N₂ in the feed, contact time, and input temperature on the yield of ethylene and valuable hydrocarbons are studied. The results show that compared with one FTS reactor configuration, the dual FTS reactor configuration is more effective and thus gives much higher product yields. Furthermore, a main decrease is observed in the formation of CO₂ and CH₄.     

Correct Prediction of the Vibration Behavior of a High Power Ultrasonic Transducer by FEM Simulation

This paper presents a study on three types of finite element analyses of high power ultrasonic transducer by using the finite element commercial software called ANSYS. The transducer geometry was treated as a 2D axi- symmetric model, 3D quart and full 3D model. For all of the simulations the modeled transducer was used in modal analysis and harmonic solutions to understand its mechanical behavior and its natural frequency. A comparison was made between each type of modeling and experimental results. This comparison allows the parameters of FEM models to be iteratively adjusted and optimized and also leads to selection of the best modeling type. The achieved FEM results exhibited a remarkably high predictive potential of ANSYS in modeling and simulation and allowed control on the design and on the vibration behavior of the high power ultrasonic transducer.     

Palyno‐morphological characteristics of gymnosperm flora of pakistan and its taxonomic implications with LM and SEM methods

The present study is intended to assess gymnosperms pollen flora of Pakistan using Light Microscope (LM) and Scanning Electron Microscopy (SEM) for its taxonomic significance in identification of gymnosperms. Pollens of 35 gymnosperm species (12 genera and five families) were collected from its various distributional sites of gymnosperms in Pakistan. LM and SEM were used to investigate different palyno‐morphological characteristics. Five pollen types (i.e., Inaperturate, Monolete, Monoporate, Vesiculate‐bisaccate and Polyplicate) were observed. Six In equatorial view seven types of pollens were observed, in which ten species were sub‐angular, nine species were Traingular, six species were Perprolate, three species were Rhomboidal, three species were semi‐angular, two species were rectangular and two species were prolate. While five types of pollen were observed in polar view, in which ten species were Spheroidal, nine species were Angular, eight were Interlobate, six species were Circular, two species were Elliptic. Eighteen species has rugulate and 17 species has faveolate ornamentation. Eighteen species has verrucate and 17 have gemmate type sculpturing. The data was analysed through cluster analysis. The study showed that these palyno‐morphological features have significance value in classification and identification of gymnosperms. Based on these different palyno‐morphological features, a taxonomic key was proposed for the accurate and fast identifications of gymnosperms from Pakistan.