回转窑测温系统安装与调试

木文介绍了回转窑温度测量系统的安装与调试。     

Visual tracking using convolutional features with sparse coding

Artificial Intelligence Review - Visual object tracking has become one of the most active research topics in computer vision, and it has been applied in several commercial...     

A new framework for sign language alphabet hand posture recognition using geometrical features through artificial neural network (part 1)

Neural Computing and Applications - Hand pose tracking is essential in sign languages. An automatic recognition of performed hand signs facilitates a number of applications, especially for people...     

Mental imagery classification using one-dimensional convolutional neural network for target selection in single-channel BCI-controlled mobile robot

Neural Computing and Applications - This paper introduces the use of the one-dimensional convolutional neural network (1D-CNN) for end-to-end EEG decoding with application towards a BCI system with...     

Autocatalytic dissolution of Pb in HNO3

The reaction between Pb and HNO₃ has been investigated using the thermometric technique. Weight-loss measurements on the reaction were also obtained. As the HNO₃ concentration is increased from 5×10^–2 to 4mol l^–1, the corrosion rate increases. This is shown thermometrically by a substantial increase in the maximum temperature attained, T _m, as well as a decrease in the time, t, required for reaching T _m. Dissolution of Pb in HNO₃ is proposed to take place according to an autocatalytic mechanism. Passivation sets were detected in solutions 11 mol l^–1 HNO₃. A parallel indication between the thermometric technique and weight-loss measurements was obtained. The rate-determining step of the autocatalytic process involves HNO₂ in dissolution of Pb in HNO₃. This is supported by the results of addition of hydrazine to the solution. This additive raises the maximum measured temperature, without affecting the corresponding time necessary to reach it. The effect of addition of NaNO₂, NaNO₃, NaCl, Na₂SO₄, NaH₂PO₄ and NaClO₄ on the reaction number, RN, of Pb in 4 mol l^–1 HNO₃ was examined. Only NaNO₂ accelerates the dissolution reaction while the other salts show as inhibition effect. It was found that these additives inhibit dissolution due to the displacement of some cathodic depolarizing components, as NO₂, from the active sites on the metal surface. The effect of addition of HCl, H₂SO₄, HClO₄ and H₃PO₄ on the reaction number, RN, of Pb in 4 mol l^–1 HNO₃ was also investigated. The observed acceleration and retardation of the dissolution of Pb was found to be dependent on both the concentration and nature of anions of the extra acids added.     

基于FPGA的无线接入点硬件平台的设计与实现*

基于认证、安全及QoS等方面的研究需要,提出了基于FPGA的HostAP设计方案,并搭建了无线接入点的硬件平台,在此平台上进行了硬件的裁减与集成;设计和实现了无线接入点的硬件电路,完成了无线接入点的高速PCB布局布线.在PCB布局布线的过程中,重点解决了高速印制电路板设计中的传输线效应问题,最后进行了实际的系统测试.     

Fabrication of composite wire of lead coated on glass fiber by extrusion

1　INTRODUCTIONCoatingglassfiberwithleadproducesakindofnewcontinuouscomposite ,whichcanfindwideap plicationsinmanydifferentfields ,especiallyinthebatteryoftheEVsandHEVsthathasalreadybecomethemostimportantgoalinmostcountries[13] .Withakindofspecialtechnologythiskindofnewcompos itewirecanbeusedtoproducegridsofnewleadacidbatterythatisveryusefultotheEVsandHEVs .Thiskindofnewleadacidbatteryhasmanyadvan tages ,suchashigherspecificenergy ,lessinnerresis tance ,morequicklychargingcapabilityand…     

冷轧处理线卷取机带头定位精度的改进

针对采用带头与卷取机芯轴橡胶套筒定位区动态接触的传统自动定位技术控制效果不好而带来带头印缺陷的问题，对其产生原因进行了分析，这是因为不同规格、钢种带钢的工艺参数不同，带钢穿带过程中在传送辊上的打滑量不同，在传输通道上的下垂量不同，带头到达卷取机芯轴定位区时计算带头位置与实际带头位置存在不稳定的偏差，因此带头定位精度不稳定。为此，开发了双动态自动定位技术，穿带过程中预留了足够的带钢打滑及下垂富余量，且带头与定位区中心线在助卷皮带咬入口静止状态下接触，消除了影响带头定位精度的主要因素，带头定位精度能稳定在±15 mm的误差范围内。实际应用效果表明，该方法可行、实用。     

原位生成Al2O3、TiB2和Al3Ti/Al复合材料的热循环行为

本文研究了Al-TiO2-B系原位生成Al2O3、TiB2和Al3Ti/Al颗粒增强铝基复合材料的热循环行为，研究结果表明了纯铝及B／TiO2摩尔比分别为0、1和2的颗粒增强铝基复合材料的热循环行为具有以下结果，纯铝和复合材料热循环后均产生了残余应变和滞后环；Al-TiO2-B系列复合材料热循环应变的各项指标均比纯铝基体大大降低，且具有较小的内耗功和较好的热稳定性，可以预测其具有较高的热疲劳寿命，热循环曲线能很好的评估复合材料在温度循环变化的环境中工作时的热稳定性和热疲劳。     

饲料级磷酸氢钙标准样品的研制

简述了饲料级磷酸氢钙标准样品的研制过程，并对样品作了稳定性试验，对搅拌设备的搅拌均匀性和物料的均匀性进行了测定，并由国家认可实验室进行了定值数据的监测。通过对比实验证明了国家实验室之间的无差异性。实验数据表明了所测定的饲料级磷酸氢钙产品是稳定和均匀的，同时简要介绍标准样品的研制程序，为开发其他化工行业标准样品奠定了基础。