Maintenance scheduling and production control of multiple-machine manufacturing systems

This paper deals with the production and preventive maintenance control problem for a multiple-machine manufacturing system. The objective of such a problem is to find the production and preventive maintenance rates for the machines so as to minimize the total cost of inventory/backlog, repair and preventive maintenance. A two-level hierarchical control model is presented, and the structure of the control policy for both identical and non-identical manufacturing systems is described using parameters, referred to here as input factors. By combining analytical formalism with simulation-based statistical tools such as experimental design and response surface methodology, an approximation of the optimal control policies and values of input factors are determined. The results obtained extend those available in existing literature to cover non-identical machine manufacturing systems. A numerical example and a sensitivity analysis are presented in order to illustrate the robustness of the proposed approach. The extension of the proposed production and preventive maintenance policies to cover large systems (multiple machines, multiple products) is discussed.     

Tight bounds for the identical parallel machine scheduling problem

We address the problem of minimizing makespan on identical parallel machines. We propose new lower bounding strategies and heuristics for this fundamental scheduling problem. The lower bounds are based on the so‐called lifting procedure. In addition, two optimization‐based heuristics are proposed. These heuristics require iteratively solving a subset‐sum problem. We present the results of computational experiments that provide strong evidence that the new proposed lower and upper bounds consistently outperform the best bounds from the literature.     

Performance Analysis of Retrial Queueing Systems Using Generalized Stochastic Petri Nets

We consider retrial queueing systems, in which an arriving customer finding the server busy, may repeat his call after a random duration. The consideration of repeated calls introduces great analytical difficulties. In fact, detailed analytical results exist for some special retrial queueing systems, while for many others, the performance evaluation is limited to numerical algorithms, approximation methods and simulation. Retrial queues have been widely used to model many problems in telephone switching systems, telecommunication and computer networks. In this paper, we show a method of modelling and analysing retrial queueing systems, using the Generalized Stochastic Petri nets (GSPNs).     

Analysis of tunnel diode antenna using iterative method

An efficient iterative method, based on the wave concept has been used to analyze the printed tunnel diode integrated antenna. A high computational speed has been achieved by introducing a 2D fast Fourier transformation (2D-FFT) in wave-guide environment. The simulated results are compared with published data and a good agreement is observed.     

Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti–6Al–4V alloy

The direct metal deposition (DMD) with laser is a free-form metal deposition process for manufacturing dense pieces, which allows generating a prototype or small series of near net-shape structures. One of the most critical issues is that produced pieces have a deleterious surface finish which systematically requires post machining steps. This problem has never been fully addressed before.The present work describes investigations on the DMD process, using an Yb-YAG disk laser, and a widely used titanium alloy (Ti–6Al–4V) to understand the influence of the main process parameters on the surface finish quality. The focus of our work was: (1) to understand the physical mechanisms responsible for deleterious surface finishes, (2) to propose different experimental solutions for improving surface finish.In order to understand the physical mechanisms responsible for deleterious surface finishes, we have carried out: (1) a precise characterization of the laser beam and the powder stream; (2) a large number of multi-layered walls using different process parameters (P(W), V(m/min), D_m (g/min), Gaussian or uniform beam distribution); (3) a real time fast camera analysis of melt pool dynamics and melt-pool – powder stream coupling; (4) a characterization of wall morphologies versus process parameters using 2D and 3D profilometry.The results confirm that surface degradation depends on two distinct aspects: the sticking of non-melted or partially melted particles on the free surfaces, and the formation of menisci with more or less pronounced curvature radii. Among other aspects, a reduction of layer thickness and an increase of melt-pool volumes to favor re-melting processes are shown to have a beneficial effect on roughness parameters. Last, a simple analytical model was proposed to correlate melt-pool geometries to resulting surface finishes.     

Polyesters bearing furan moieties

Summary This paper describes a preliminary set of results concerning novel systems in which the synthesis of furanic polyesters was conducted according to a transesterification procedure. Regular linear macromolecular structures were thus obtained with molecular weights well above those previously reported for similar polyesters prepared by more conventional routes.     

Hydratation et texture fibreuse de V2O5 amorphe

Reversible hydration of amorphous V₂O₅ has been performed in order to study the effect of water upon the properties of the oxide. A drastic change of the ESR spectrum is observed, which turns from anisotropic to isotropic upon hydration. This has been interpreted in terms of a brownian motion which, by analogy with the V₂O₅ gels, is supposed to be due to the fibrous texture of the amorphous oxide.