Correction to: Recent advances in the design of metal–organic frameworks for methane storage and delivery

Journal of Porous Materials -     

Use of FIB to Study ZDDP Tribofilms

Focussed ion beam milling (FIB) followed by TEM has been used to study ZDDP tribofilms on rubbed steel surfaces. It has been found that the impact of high energy platinum and gallium ions during FIB causes significant morphological and structural changes to the uppermost 30–50 nm of a ZDDP tribofilm. This can be prevented by the low energy deposition of a quite thick gold layer prior to installation of the sample in the FIB facility. This problem, and its solution, have been quite widely reported in the non-tribology literature but have not previously been highlighted in the application of FIB to study tribological surfaces. It has also been found, using this gold pre-deposition method, that the bulk of the ZDDP tribofilm studied has a polycrystalline structure.     

Vapor-liquid equilibrium of ethanol/ethyl acetate mixture in ultrasonic intensified environment

A vapor-liquid equilibrium (VLE) study was conducted on ethanol/ethylacetate mixture as a preliminary step towards developing an ultrasonic-assisted distillation process for separating azeotropic mixtures. The influence of ultrasonic intensity and frequency on the vapor-liquid equilibrium (VLE) of the mixture was examined using a combination of four ultrasonic intensities in range of 100–400W/cm² and three frequencies ranging from 25–68 kHz. The sonication was found to have significant impacts on the VLE of the system as it alters both the relative volatility and azeotrope point, with preference to lower frequency operation. A maximum relative volatility of 2.32 was obtained at an intensity of 300 W/cm2 and a frequency of 25 kHz coupled with complete elimination of ethanol-ethyl acetate azeotrope. Results from this work were also congruent with some experimental and theoretical works presented in the literature. These findings set a good beginning towards the development of an ultrasonic assisted distillation that is currently in progress.     

Synthesis and characterization of coumarin thiazole derivative 2-(2-amino-1,3-thiazol-4-yl)-3H-benzo[f]chromen-3-one with anti-microbial activity and its potential application in antimicrobial polyurethane coating

Coumarin, thiazole and their respective derivative products are some of the oldest and most commonly known class of nitrogen and sulphur containing compounds. In recent years there has been considerable interest in this coumarin–thiazole derivatives, which have been reported to exhibit significant biological activity and are widely used as pharmaceuticals. They are capable of imparting anti-microbial activity properties when incorporated into polymers and polymer composites. In this research, coumarin–thiazole derivative 2-(2-amino-1,3-thiazol-4-yl)-3H benzo[f]chromen-3-one (compound III), was prepared and its structure was confirmed by means of its spectra data. It was also screened for its anti-microbial activity against eight different micro-organisms when physically incorporated into a polyurethane varnish formula. Experimental coatings were manufactured on a laboratory scale and applied by means of a brush on both glass and steel panels. The results of the biological activity indicated that the polyurethane varnishes containing the 2-(2-amino-1,3-thiazol-4-yl)-3H-benzo[f]chromen-3-one (compound III) derivative, exhibit a very good antimicrobial effect. The molecular modeling study revealed that it is biologically safe, it is active and it fulfills Lipinski's rule of five. The physical and mechanical resistances of the polyurethane varnish formulations were also studied to evaluate any drawbacks associated with the addition of the derivative. The studies indicate that the physical incorporation of compound III actually enhances slightly both the physical and mechanical properties.     

Effect of surfactants on the rate of diffusion-controlled Cementation of copper from dilute solutions on a stationary zinc disc in stirred vessels

The effect of surfactants on the rate of diffusion-controlled cementation of copper from dilute copper sulphate solutions on a stationary zinc disc in a stirred vessel was studied. Variables investigated were rotational speed of the impeller, concentration and type of surfactants and concentration of copper sulphate solution. These variables were studied for their effect on the mass transfer coefficient of copper cementation. The mass transfer coefficient was found to increase with increasing rotational speed of the impeller and concentration of copper sulphate solution. It was found that surfactants decrease the rate of mass transfer during cementation by an amount ranging from 9.5 to 25° depending on the rotational speed of the impeller and type of surfactant added. Increasing surfactant concentration was found to decrease the mass transfer coefficient. The ability of different surfactants to decrease the mass transfer coefficient increases in the order: CTMAB < SABS < NPPGE. Mass transfer data were correlated, in absence and in presence of surfactants, by the following equations respectively: Where Sh is Sherwood number, Re is Reynolds number, and Sc is Schmidt number.     

Synthesis and characterization of cellulose nanowhisker-reinforced-poly(ε-caprolactone) scaffold for tissue-engineering applications

Poly(ε-caprolactone) (PCL) is a bioresorbable and biocompatible polymer with assorted medical applications. However, remarkable hydrophobicity and nonosteoconductivity have stood as a barrier to limit its applications. The present study aims to modify the bulk characteristics of PCL to develop a polymeric scaffold with adequate structural and mechanical properties to support regenerated tissues. For this purpose, functionalized bacterial cellulose nanowhiskers (BCNW-g-βCD-PCL₂₀₀₀) are synthesized. Reinforcing PCL matrix with 4 wt % of the nanowhiskers resulted in a bionanocomposite with promoted bulk properties. Compared to neat PCL, the obtained bionanocomposite shows improvements of 115 and 51% in tensile strength and Young's modulus, respectively; 20% increase in hydrophilicity; 7% increase in degradation rate; and 6% decrease in crystallinity. Gas foaming/combined particulate leaching technique is used to develop highly porous structures of 86–95% porosity with interconnected macropores of mean pore diameters of 250–420 μm. Porous scaffolds showed compression modulus values of 5.3–9.1 MPa and would have promising applications in regenerative medicine. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48481.     

ZnIn2S4/g-C3N4 Nanocomposite for Proficient Elimination of Hg (II) under Visible Light

Journal of Inorganic and Organometallic Polymers and Materials - The present work offers beneficial method for Hg (II) elimination from aqueous solution. ZnIn2S4/g-C3N4 nanocomposites were...     

Predicting axial piston pump performance using neural networks

A neural network model for an axial piston pump (bent-axis design) is derived in this paper. The model uses data obtained from an experimental setup. The purpose of this ongoing study is the reduction of the power loss at high pressures. However, at the beginning, a study is being done to predict the behavior of the current design of the pump. The neural network model has a feedforward architecture and uses the Levenberg–Marquardt optimization technique in the training process. The model was able to predict the behavior of the pump accurately.     

Inactivation of Escherichia coli O157:H7, Listeria monocytogenes, Salmonella enterica and Shigella flexneri on spinach leaves by X-ray

Several recent foodborne disease outbreaks associated with leafy green vegetables, including spinach, have been reported. X-ray is a non-thermal technology that has shown promise for reducing pathogenic and spoilage bacteria on spinach leaves. Inactivation of inoculated Escherichia coli O157:H7, Listeria monocytogenes, Salmonella enterica and Shigella flexneri on spinach leaves using X-ray at different doses (0.1, 0.2, 0.3, 0.5, 0.75, 1.0, 1.5 and 2.0 kGy) was studied. The effect of X-ray on color quality and microflora counts (mesophilic counts, psychrotrophic counts and yeast and mold counts) of untreated and treated spinach was also determined. A mixture of three strains of each tested organism was spot inoculated (100 μl) onto the surface of spinach leaves (approximately 8–9 log ml⁻¹), separately, and air-dried, followed by treatment with X-ray at 22 °C and 55–60% relative humidity. Surviving bacterial populations on spinach leaves were evaluated using a nonselective medium (tryptic soy agar) with a selective medium overlay for each bacteria; E. coli O157:H7 (CT-SMAC agar), L. monocytogenes (MOA), and S. enterica and S. flexneri (XLD). More than a 5 log CFU reduction/leaf was achieved with 2.0 kGy X-ray for all tested pathogens. Furthermore, treatment with X-ray significantly reduced the initial inherent microflora on spinach leaves and inherent levels were significantly (p < 0.05) lower than the control sample throughout refrigerated storage for 30 days. Treatment with X-ray did not significantly affect the color of spinach leaves, even when the maximum dose (2.0 kGy) was used.     

Antioxidant properties of various solvent extracts of potato peel,sugar beet pulp and sesame cake

BACKGROUND: Growing interest in the replacement of synthetic food antioxidants by natural ones has fostered research on vegetable sources and screening of raw materials to identify new antioxidants. The food‐processing industry generates substantial quantities of phenolic‐rich by‐products that could be valuable natural sources of antioxidants. In this study the antioxidant properties and total phenolic, flavonoid and flavonol contents of three industrial by‐products, sugar beet pulp, sesame cake and potato peel, extracted with various solvents were examined. Since different antioxidant compounds have different mechanisms of action, several methods were used to assess the antioxidant efficacy of extracts. RESULTS: Among the six solvents tested, methanol gave the highest extract yield of potato peel and sugar beet pulp, while diethyl ether gave the highest extract yield of sesame cake. Methanol exhibited the highest extraction ability for phenolic compounds, with total phenolics amounting to 2.91, 1.79 and 0.81 mg gallic acid equivalent g^?1 dry weight in potato peel, sugar beet pulp and sesame cake extracts respectively, and also showed the strongest antioxidant capacity in the three assays used. All three methods proved that potato peel extract had the highest antioxidant activity owing to its high content of phenolic compounds and flavonoids. CONCLUSION: On the basis of the results obtained, potato peel, sugar beet pulp and sesame cake extracts could serve as natural antioxidants owing to their significant antioxidant activity. Therefore they could be used as preservative ingredients in the food and/or pharmaceutical industries. Copyright © 2009 Society of Chemical Industry