Performance and thermo-economic assessments of geothermal district heating system: A case study in Afyon,Turkey

In this study energy, exergy and exergoeconomic analysis of the Afyon geothermal district heating system (AGDHS) in Afyon, Turkey is performed through thermodynamic performances and thermo-economic assessments. In the analysis, actual system data are used to assess the district heating system performance, energy and exergy efficiencies, exergy losses and loss cost rates. Energy and exergy losses throughout the AGDHS are quantified and illustrated in the flow diagram. The energy and exergy efficiencies of the overall system are found to be 37.59% and 47.54%, respectively. The largest exergy loss occurs in the heat exchangers with 14.59% and then in the reinjection wells with 14.09%. Besides, thermo-economic evaluations of the AGDHS are given in table. Energy and exergy loss rates for the AGDHS are estimated to be 5.36 kW/$ and 0.2  kW/$, respectively.     

Technical and economic assessment of photovoltaic-driven desalination systems

Solar desalination systems are approaching technical and cost viability for producing fresh-water, a commodity of equal importance to energy in many arid and coastal regions worldwide. Solar photovoltaics (PV) represent an ideal, clean alternative to fossil fuels, especially for remote communities such as grid-limited villages or isolated islands. These applications for water production in remote areas are the first to be nearing cost-competitiveness due to decreasing PV prices and increasing fossil fuel prices over the last five years. The electricity produced from PV systems for desalination applications can be used for electro-mechanical devices such as pumps or in direct-current (DC) devices. Reverse osmosis (RO) and electrodialysis (ED) desalination units are the most favorable alternatives to be coupled with PV systems. RO usually operates on alternating current (AC) for the pumps, thus requiring a DC/AC inverter. In contrast, electrodialysis uses DC for the electrodes at the cell stack, and hence, it can use the energy supplied from the PV panels with some minor power conditioning. Energy storage is critical and batteries are required for sustained operation. In this paper, we discuss the operational features and system designs of typical PV-RO and PV-ED systems in terms of their suitability and optimization for PV operation. For PV-RO and PV-ED systems, we evaluate their electricity need, capital and operational costs, and fresh-water production costs. We cover ongoing and projected research and development activities, with estimates of their potential economics. We discuss the feasibility of future solar desalination based on expected (or predicted) improvements in technology of the desalination and PV systems. Examples are provided for Middle East and other parts of the World.     

One-pot two-step lipase-catalyzed synthesis of α,ω-thiophene-capped poly(ε-caprolactone) macromonomers and their use in electropolymerization

Macromonomers based on poly(ε-caprolactone) (PCL) with α,ω-thiophene functional end groups were prepared in bulk by enzymatic polymerization using immobilized Candida Antarctica lipase B (Novozym 435) as the catalyst. In the synthesis strategy, 3-thiophenemethanol was used to initiate the enzyme-assisted ring-opening polymerization of ε-caprolactone (ε-CL) to yield PCL with α-thiophene end group (initiation reaction, ThPCL) and then 3-thiopheneacetic acid was added to prepolymerized ε-CL to introduce ω-thiophene functionality in termination step (ThPCLTh). Macromonomers were characterized by ¹H and ¹³C NMR, FTIR, and GPC. Moreover, the obtained macromonomers were employed in electropolymerization experiments and copolymers with thiophene or pyrrole were synthesized through their end thiophene groups. These polymers were characterized by cyclic voltammetry (CV), FTIR, and scanning electron microscopy (SEM). Conductivity measurements were carried out by the four-probe technique.     

HVOF sprayed WC–Co coatings: Microstructure,mechanical properties and friction moment prediction

This study aims at gaining a better understanding of the microstructural features that control the mechanical and the tribological performances of WC–12 wt.% Co coatings under High Velocity Oxygen Fuel (HVOF) spraying conditions. This paper looks at the influences of the HVOF process parameters for WC–12Co material on the microstructural and the tribological behaviours of the coatings. The correlation between the coating microstructure and the wear behaviour is investigated by observing and analysing the microstructure and by studying the friction moment using enhanced statistical tool based on neural computations. According to the experimental and the numerical results, it has been shown that the spray parameters affect the phase composition, hardness and porosity of HVOF sprayed WC–12Co coatings and the correlations with HVOF process parameters are fully predictable in the steady-state regime.     

Techno-economic assessment of gas pressure-based electricity generation (A case study of Iran)

The pipeline gas pressure can be recovered as electricity by installing a turbo-expander in parallel with throttle valves at pressure reduction stations. This paper aims to provide a techno-economic assessment of electricity generation at a gas pressure reduction station. Owing to the gas flow rate of the station, technical assessment showed two installation capacities of 2853 kw (Case I) and 4169 kw (Case II). As a result, NPV and IRR for Case I is calculated €1,669,623.93 and 28.95%; and for Case II, NPV and IRR is €1,393,871.91 and 23.91% respectively. The analysis indicated case I is more profitable than case II.     

Comparison of ionic liquid,acid and alkali pretreatments for sugarcane bagasse enzymatic saccharification

BACKGROUND: Much attention has been given to applying ionic liquids (ILs) as an alternative pretreatment method for lignocellulosic biomass. This study aims to select the most suitable type of IL for pretreating sugarcane bagasse (SCB). The potential of ILs for pretreatment was evaluated and compared with conventional pretreatment media, acids and alkalis. The performance of the pretreatment media was evaluated based on the amount of reducing sugar produced from enzymatic saccharification, the energy requirement, and changes in the chemical structure and crystallinity index of the pretreated bagasse. RESULTS: 1‐ethyl‐3‐methylimidazolium acetate [EMIM]oAc was selected as the most suitable IL for SCB pretreatment. The optimum yields of reducing sugar obtained from [EMIM]oAc‐, alkali‐, and acid‐pretreated SCB were 69.5%, 92.8% and 41.3%, respectively. Although a lower yield of reducing sugar was obtained, [EMIM]oAc pretreatment required the least energy to pretreat 1 kg of SCB. Moreover, the percentage of SCB loss during [EMIM]oAc pretreatment was the lowest. [EMIM]oAc‐pretreated SCB also had the lowest crystallinity index (CI) with the most amorphous structure. CONCLUSION: [EMIM]oAc appears to be another option for pretreating SCB, and other issues such as the recyclability of [EMIM]oAc is worth investigating. Copyright © 2011 Society of Chemical Industry     

Miscibility of poly(acrylic acid)/poly(methyl vinyl ketone) blend and in vitro application as drug carrier system

A series of poly(acrylic acid)/poly(methyl vinyl ketone) (PAA/PMVK) blends with different compositions were prepared by the solvent casting method. The miscibility of this pair of polymers was investigated by differential scanning calorimetry(DSC), Fourier transform infra-red (FTIR) and X-Ray diffraction (XRD) techniques. An in-vitro cytotoxicity test of the drug-carrier system via MTT (3-(4,5-demethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay revealed no significant cytotoxic effects at concentrations up to 100 µg· ml^?1. The STX/PAA-50 drug carrier systems were also prepared by solvent casting of solutions containing the sulfamethoxazole (STX) used as drug model and PAA/PMVK blend in N.N-dimethylformamide then crosslinked with acidified ethylene glycol. The release dynamic of STX from the prepared hydrogels was investigated in which the diffusion through the polymer matrix, the enhancement of the water solubility of STX, the influence of the initial drug concentration, the pH of the medium, and the effect of the degree of swelling of the polymer matrix on the release dynamic was evaluated. According to the total gastrointestinal transit time estimated by Belzer, the estimate distribution of STX released in the different organs indicated that the performance is obtained with the drug – carrier-system containing equal ratios of polymer and 10 wt% of STX (STX-10/PAA-50).     

Thermal performance of different pond cells under actual climatic conditions in Qatar

Experimental work was undertaken to study the thermal performance of three different pond cells under actual climatic conditions of Qatar. The first cell was an open pond. In the second unit, a finned radiator, painted black, was placed over the pond. In the third cell, the water was contained in a polyethylene bag. Experimental results indicated that the exposed pond cell came out best, when considered in terms of how quickly the temperature of the stored water could be reduced, and how low that temperature could be. The water in the exposed pond was cooled directly (by evaporation and radiation to sky) whereas in the case of the finned radiator cell, heat had to be transferred from the stored water to the radiator, and then from the radiator to the surrounding. In the case of water-in-bag cell, evaporation was eliminated and radiative exchange with the sky was reduced due to the partial transparency of the polyethylene bag (in the infrared region).