Multi-objective optimization of laminated composite shells for minimum mass/cost and maximum buckling pressure with failure criteria under external hydrostatic pressure

In the present study, Multi-objective optimization of composite cylindrical shell under external hydrostatic pressure was investigated. Parameters of mass, cost and buckling pressure as fitness functions and failure criteria as optimization criterion were considered. The objective function of buckling has been used by performing the analytical energy equations and Tsai-Wu and Hashin failure criteria have been considered. Multi-objective optimization was performed by improving the evolutionary algorithm of NSGA-II. Also the kind of material, quantity of layers and fiber orientations have been considered as design variables. After optimizing, Pareto front and corresponding points to Pareto front are presented. Trade of points which have optimized mass and cost were selected by determining the specified pressure as design criteria. Finally, an optimized model of composite cylindrical shell with the optimum pattern of fiber orientations having appropriate cost and mass is presented which can tolerate the maximum external hydrostatic pressure.

     

Fuzzy hypersemigroups

We introduce the notions of fuzzy hypersemigroup, fuzzy hypergroup, fuzzy hyperideal, homomorphism, hyper congruence, fuzzy homomorphism, fuzzy hypercongruence. The purpose of this note is the study of some characterization of fuzzy hypersemigroup, fuzzy hyperideal of a fuzzy hypersemigroup and homomorphism and hypercongruence on a hypersemigroup.     

A step forward in studying the compact genetic algorithm

The compact Genetic Algorithm (cGA) is an Estimation of Distribution Algorithm that generates offspring population according to the estimated probabilistic model of the parent population instead of using traditional recombination and mutation operators. The cGA only needs a small amount of memory; therefore, it may be quite useful in memory-constrained applications. This paper introduces a theoretical framework for studying the cGA from the convergence point of view in which, we model the cGA by a Markov process and approximate its behavior using an Ordinary Differential Equation (ODE). Then, we prove that the corresponding ODE converges to local optima and stays there. Consequently, we conclude that the cGA will converge to the local optima of the function to be optimized.     

Predictability and forecasting automotive price based on a hybrid train algorithm of MLP neural network

In this paper, using the Hurst exponent value H, we first show that the automotive price in Iran Khodro Company (IRAN) is predictable and therefore a good forecasting can be done using neural networks. We then introduce a new global and fast hybrid multilayer perceptron neural network (MLP-NN) in order to forecast the automotive price. In our new framework, we hybridize the genetic algorithm (GA) and least square (LS) method in order to train the connected weights of the network, which leads us to have a global and fast network. To do so, the connected weights between input and hidden layers are trained by GA and the connected weights between the hidden and output layers are trained by LS method. We finally apply our new MLP-NN to forecast the automotive price in Iran Khodro Company, which is the biggest automotive manufacturing in IRAN. The results are well promising compared with the cases when we apply the GA and LS individually. We also compare the results with the case when we employ the gradient-based optimization techniques such as Levenberg–Marquardt method as well as some heuristic algorithms such as extended tabu search algorithm instead of LS method and hybridization of MLP-LM with GA.     

CCGA packages for space applications

Commercial-off-the-shelf (COTS) area array packaging technologies in high reliability versions are now being considered for applications, including use in a number of NASA electronic systems being utilized for both the Space Shuttle and Mars Rover missions. Indeed, recently a ceramic package version specifically tailored for high reliability applications was used to provide the processing power required for the Spirit and Opportunity Mars Rovers built by NASA-JPL. Both Rovers successfully completed their 3-months mission requirements and continued exploring the Martian surface for many more moths, providing amazing new information on previous environmental conditions of Mars and strong evidence that water exists on Mars.Understanding process, reliability, and quality assurance (QA) indicators for reliability are important for low risk insertion of these newly available packages in high reliability applications. In a previous investigation, thermal cycle test results for a non-functional daisy-chained peripheral ceramic column grid array (CCGA) and its plastic ball grid array (PBGA) version, both having 560 I/Os, were gathered and are presented here. Test results included environmental data for three different thermal cycle regimes (−55/125 °C, −55/100 °C, and −50/75 °C). Detailed information on these—especially failure type for assemblies with high and low solder volumes—are presented. The thermal cycle test procedure followed those recommended by IPC-9701 for tin–lead solder joint assemblies. Its revision A covers guideline thermal cycle requirements for Pb-free solder joints. Key points on this specification are also discussed.In a recent investigation a fully populated CCGA with 717 I/Os was considered for assembly reliability evaluation. The functional package is a field-programmable gate array that has much higher processing power than its previous version. This new package is smaller in dimension, has no interposer, and has a thinner column wrapped with copper for reliability improvement. This paper will also present thermal cycle test results for assemblies of this and its plastic package version with 728 I/Os, both of which were exposed to four different cycle regimes. Two of these cycle profiles are specified by IPC-9701A for tin–lead, namely, −55 to 100 °C and −55 to 125 °C. One is a cycle profile specified by Mil-Std-883, namely, −65/150 °C, generally used for ceramic hybrid packages screening and qualification. The last cycle is in the range of −120 to 85 °C, a representative of electronic systems directly exposed to the Martian environment without use in a thermal control enclosure. Per IPC-9701A, test vehicles were built using daisy chain packages and were continuously monitored and/or manually checked for opens at intervals. The effects of many process and assembly variables—including corner staking commonly used for improving resistance to mechanical loading such as drop and vibration loads—were also considered as part of the test matrix. Optical photomicrographs were taken at various thermal cycle intervals to document damage progress and behavior. Representative samples of these are presented along with cross-sectional photomicrographs at higher magnification taken by scanning electron microscopy (SEM) to determine crack propagation and failure analyses for packages.     

Nano levels detection of beryllium by a novel beryllium PVC-based membrane sensor based on 2,3,5,6,8,9-hexahydro-1,4,7,10-benzotetra oxacyclododecine-12-carbaldehyde-12-(2,4-dinitrophenyl)hy

A novel poly(vinyl chloride)-based 2,3,5,6,8,9-hexahydro-1,4,7,10-benzotetra oxacyclododecine-12-carbaldehyde-12-(2,4-dinitrophenyl)hy (PBC) with sodium tetraphenyl borate (NaTPB) as an anion excluder, benzyl acetate (BA), acetophenon (AP) and o-nitrophenyloctyl ether (NPOE) as plasticizing solvent mediators was prepared and investigated as a beryllium selective sensor. The best performance was observed with the membrane having the PVC–NaTPB–NPOE–PBC composition 30%:3%:62%:5%, which worked well over a very wide concentration range (1.0×10⁻⁷ M to 1.0×10⁻¹ M). The sensor exhibits a Nernstian slope of 29.9 mV per decade of Be²⁺ activity. The detection limit of the sensor is 7.0×10⁻⁸ M (630 ppt). The proposed electrode shows excellent discriminating ability toward Be²⁺ ion with regard to alkali, alkaline earth, transition and heavy metal ions. It was successfully applied to the determination of beryllium in a mineral sample.     

Predicting the spontaneous termination of atrial fibrillation based on poincare section in the electrocardiogram phase space

Atrial fibrillation (AF) is a commonly encountered cardiac arrhythmia. Predicting the conditions under which AF terminates spontaneously is an important task that would bring great benefit to both patients and clinicians. In this study, a new method was proposed to predict spontaneous AF termination by employing the points of section (POS) coordinates along a Poincare section in the electrocardiogram (ECG) phase space. The AF Termination Database provided by PhysioNet for the Computers in Cardiology Challenge 2004 was applied in the present study. It includes one training dataset and two testing datasets, A and B. The present investigation was initiated by producing a two-dimensional reconstructed phase space (RPS) of the ECG. Then, a Poincare line was drawn in a direction that included the maximum point distribution in the RPS and also passed through the origin of the RPS coordinate system. Afterward, the coordinates of the RPS trajectory intersections with this Poincare line were extracted to capture the local behavior related to the arrhythmia under investigation. The POS corresponding to atrial activity were selected with regard to the fact that similar ECG morphologies such as P waves, which are corresponding to atrial activity, distribute in a specific region of the RPS. Thirteen features were extracted from the selected intersection points to quantify their distributions. To select the best feature subset, a genetic algorithm (GA), in combination with a support vector machine (SVM), was applied to the training dataset. Based on the selected features and trained SVM, the performance of the proposed method was evaluated using the testing datasets. The results showed that 86.67% of dataset A and 80% of dataset B were correctly classified. This classification accuracy is in the same range as or higher than that of recent studies in this area. These results show that the proposed method, in which no complicated QRST cancelation algorithm was used, has the potential to predict AF termination.     

Scattering of elastic P- and SV-waves by a circular coated nanofiber based on Gurtin–Murdoch model of surface elasticity: Scattering cross section results

In this article, an analytical study of elastic P- and SV-wave scattering by a circular nanofiber is presented. The nanofiber is assumed to be surrounded by an inhomogeneous interphase layer, and Gurtin–Murdoch's model of surface elasticity is utilized to study the surface/interface effects in the regions between the fiber and interphase and also interphase and matrix. The simultaneous effects of surface elasticity and interphase inhomogeneity are considered here; by taking the inhomogeneous interphase to be composed of several sublayers, a transfer matrix approach is used to find the unknown field variables and, consequently, the scattering cross sections. The results indicate that considering the effects of surface elasticity and interphase inhomogeneity has a considerable impact on the calculated scattering cross sections.     

New Approaches in Monitoring Multivariate Categorical Processes based on Contingency Tables in Phase II

In some statistical process control (SPC) applications, quality of a process or product is characterized by contingency table. Contingency tables describe the relation between two or more categorical quality characteristics. In this paper, two new control charts based on the WALD and Stuart score test statistics are designed for monitoring of contingency table‐based processes in Phase‐II. The performances of the proposed control charts are compared with the generalized linear test (GLT) control chart proposed in the literature. The results show the better performance of the proposed control charts under small and moderate shifts. Moreover, new schemes are proposed to diagnose which cell corresponding to different levels of categorical variables is responsible for out‐of‐control signal. In addition, we propose EWMA–WALD and EWMA–Stuart score test control charts to improve the performance of Shewhart‐based control charts in detecting small and moderate shifts in contingency table parameters. Meanwhile, we compare the performances of two proposed EWMA‐based control charts with the ones of three existing control charts called EWMA–GLT, EWMA–GLRT and an EWMA‐type control chart for multivariate binomial/multinomial processes along with the ones of the corresponding Shewhart‐based control charts. A numerical example is given to show the efficiency of the proposed methods. Finally, the effect of parameter estimation in Phase I based on m historical contingency table on the performance of the Shewhart‐based control charts is studied. Copyright © 2016 John Wiley & Sons, Ltd.