Swift and Selective Reduction of Nitroaromatics to Aromatic Amines with Ni–Boride–Silica Catalysts System at Low Temperature

Various nitroaromatics are successfully reduced to amines with 100% conversion and selectivity in methanol at low temperature (≈5 °C), by using versatile system of 5% Ni–SiO₂ catalyst and NaBH₄ and in situ generation of Ni boride. The catalytic efficiency of Ni loading (5%, 10% and 15%) with silica or titania as support materials is investigated for reduction of nitrobenzene. The Ni–titania/NaBH₄ system recorded lower conversion and selectivity. The IR studies indicate that silica support does not have free –OH group on its surface. Thus the nickel boride is anchored to the silica to facilitate the catalytic process.     

An investigation into physicochemical characteristics of ash produced from combustion of oil palm biomass wastein a boiler

Ash derived from combustion of Malaysian oil palm biomass (empty fruit bunches consisting of fibers) was physically and chemically characterized in order to provide a comprehensive understanding of its specific properties in terms of toxicity, compositions and reusability. Principal analyses conducted include particle size distribution, scanning electron microscopy, elemental dispersive X-ray, elemental analysis, toxicity characteristic leaching procedure (TCLP) as well as thermogravimetric, X-ray diffractometry and Fourier-transform infrared analyses. TCLP result indicated that the oil palm ash (OPA) should not be classified as toxic wastes in terms of heavy metal leachability since leachable copper, cadmium, lead and nickel concentrations were detected below the stipulated leachability limits. It was determined that the OPA contained high amount of potassium as well as presence of silica which implied its suitability to be reused as crude fertilizer or cement replacement material.     

优化移动多媒体传输链的功耗

消费者对于移动多媒体的需求是毫无疑问的，满足这些需求的技术已经开发成功，对于设计人员而言，剩下的问题就是如何利用这些技术，并将成功的产品带入市场。本文将讨论如何减省移动多媒体设备内关键元件的功耗，此外也会对现今移动多媒体设备设计人员所面对的工程挑战作出概括的分析，并就目前及新涌现的硅技术，提出可克服这些工程挑战的解决方案。     

Multilevel optimization applied to hull girder design using three panel forms

A multilevel design scheme for ship's hull girders (longitudinal members between two adjacent transverse frames) is presented in this paper. This design scheme handles, very conveniently, the complexity of using an optimization algorithm for such complex design problems having a large number of design variables, nonlinear constraints dealing with different failure modes and interactions among substructures, and nonlinear design objectives. The conventional multilevel design technique is modified by introducing an approach called constraint coordination to increase the probability of achieving the overall optimum very efficiently.The scheme is demonstrated by application to the structural design of hull girders with simple structural modelling to represent inland waterway ships on which there was a special emphasis in the original research project (Rahman 1991). Three possible panel (consisting of one stiffener and its attached plating) forms; tee stiffened, flat-bar stiffened and corrugated, are optimized to synthesize the hull girder in order to achieve the most efficient structure. The effect of price-structure (labour rate to material price ratio) on the design is also investigated.     

Cyclobutanones as markers for irradiated samples of Brie and Camembert cheese

The feasibility of applying a chemical method based on the formation of 2-alkylcyclobutanone to samples of irradiated soft cheese (Brie and Camembert) was investigated. Significant quantities of 2-dodecylcyclobutanone (DCB) and 2-tetradecylcyclobutanone (TCB) were detected in both types of irradiated cheese and are proposed as qualitative markers. Other members of the cyclobutanone family (decyl- and tetradecenyl-) are also thought to be present but could not be substantiated due to a lack of authentic standards. These compounds were absent from the unirradiated samples. Results also show a significant linear relationship between the irradiation dose (1 to 8 kGy) and the amount of DCB and TCB detected in the cheese.     

Activation of 5-HT2 receptors facilitates depolarization of neocortical neurons by N-methyl-D-aspartate

We prospectively studied 63 children with transient hyperglycemia to determine their risk of acquiring insulin-dependent diabetes mellitus (IDDM) and to evaluate the predictive value of immunologic markers of prediabetes and of the intravenous glucose tolerance test. Children with transient hyperglycemia were identified by a prospective systematic review of the laboratory reports of a large children's hospital and an office-based pediatric practice and by referral from pediatricians. Transient hyperglycemia occurred in 0.46% of children seen in the children's hospital and in 0.013% of children attending a pediatric office practice. Insulin-dependent diabetes mellitus developed within 18 months of identification in 32% of children in whom transient hyperglycemia was discovered in the absence of a serious illness, compared with 2.3% of children identified during a serious illness (relative risk, 13.9; 95% confidence interval, 1.56 to 123.5). Islet cell antibodies and competitive insulin autoantibodies each had a 100% positive predictive value for IDDM; the negative predictive value of islet cell antibodies and competitive insulin autoantibodies was 96% and 98%, respectively. The stimulated insulin release during an intravenous glucose tolerance test, adjusted for age, had the highest overall accuracy of prediction. All children less than 6 years of age with stimulated insulin release levels < 85 pmol/L (12 microU/ml) subsequently had IDDM, as did an 11-year-old child whose stimulated insulin release level was below the 1st percentile of 170 pmol/L (24 microU/ml). To date, no child whose stimulated insulin release level was above the 5th percentile has had IDDM. We conclude that when transient hyperglycemia occurs during a serious intercurrent illness, the risk of progression to IDDM is low. In contrast, one third of children in whom transient hyperglycemia is identified without a serious illness can be expected to have IDDM within 1 year. A combination of islet cell antibodies, competitive insulin autoantibodies, and stimulated insulin release levels during an intravenous glucose tolerance test can accurately distinguish children with prediabetes from those with presumed benign transient increases in plasma glucose concentrations.     

Circulating angiotensin II and renal sodium handling in man: a dose-response study

1. Animal studies have shown that angiotensin II has a biphasic effect on urinary sodium excretion. To examine whether this is also true in man, we studied seven salt-replete male subjects in a single-blind placebo-controlled manner. 2. While undergoing maximum diuresis, subjects were infused with 0, 1, 2, 5 or 10 ng of angiotensin II min-1 kg-1 over 80 min. Subjects were studied while seated, and stood every 20 min for urine collection. 3. Angiotensin II produced a dose-dependent antidiuretic effect. The urine flow rate, in ml/min expressed as the change from baseline with increasing dose of angiotensin, was: +3.4 +/- 1.77, -1.26 +/- 0.49 (P < 0.05), -2.75 +/- 1.23 (P < 0.05), -4.21 +/- 0.82 (P < 0.05) and -6.51 +/- 1.07 (P < 0.01). 4. In contrast, the effect of angiotensin II on sodium excretion showed a flat dose-response curve beyond 5 ng min-1 kg-1. The urinary sodium excretion, in mumol/min expressed as the change from baseline with increasing dose of angiotensin, was: 9.5 +/- 21.2, -18.9 +/- 29.6, -37.0 +/- 11.6 (P < 0.05), -67.7 +/- 19.6 (P < 0.01) and -63.8 +/- 14.3 (P < 0.01). 5. The fractional distal reabsorption of sodium, determined by using the lithium clearance technique, showed a rise with all doses of angiotensin II used and reached statistical significance with the top two doses. 6. Unlike antidiuresis, antinatriuresis after graded doses of angiotensin II in human subjects showed a flat dose-response curve beyond 5 ng min-1 kg-1. Pressor doses of angiotensin II also have a significant effect on the distal tubule in promoting sodium reabsorption.     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

Electrical Insulation Characteristics of Silicone and EPDM Polymeric Blends. I

The typical parts of a polymeric insulator are core, metal end fittings and polymeric housing material. The housing is intended to protect the fibre glass rod from the environment and electrical surface discharges. Since the housing materials are made of organic polymeric material, its insulation characteristics need to be studied. Amongst the many different polymers available, this work focuses on silicone rubber and ethylene propylene diene monomer (EPDM). Blends of EPDM and silicone rubber are prepared in a two roll mixing mill. Dicumyl peroxide is used as vulcanizing agent. The blends consisting of various proportions of component polymers are prepared, compression moulded into sheets, and post cured. The blends are tested for their insulation characteristics as per IEC and ASTM standards. Volume and surface resistivity, dielectric strength, dielectric constant, tan delta, tracking resistance, arc resistance, comparative tracking index, tensile strength, and percentage elongation at break of the blends are studied and discussed. The test results show that the increasing proportion of silicone enhances the electrical insulation properties whereas increasing weight percentage of EPDM improves the mechanical strength of the blends.     

The functional reanimation of paralyzed limbs.

The functional reanimation of paralyzed limbs has been a longstanding goal of neural prosthetic research, but clinically successful applications have been elusive. Natural voluntary limb movement requires four major elements: actuators (i.e., motor units), sensors (i.e., somatosensory afferents), commands (i.e., cerebral cortical activity), and control (i.e., integration of the previous three elements at various levels of the neuraxis). Prosthetic equivalents of each of these elements are, as yet, primitive and often cumbersome to deploy, but new technologies promise substantial improvements for all. This article focuses on one such technology, bionic neuon (BION) modular microimplants, and its relationship to alternative and complementary technologies. The challenge remains to select and integrate them into systems that can be tailored efficiently to the widely disparate needs of patients with various patterns of weakness and paralysis.