Investigation of micro-EDM material removal characteristics using single RC-pulse discharges

Similar to EDM, in micro-EDM, intense heat is generated between the workpiece and tool electrode by the discharge through a dielectric medium to result in the formation of a microcrater that is much smaller in size. In this study, a single-spark generator has been developed to study the erosion characteristics from the microcrater size. Using a simple heat transfer model, the efficiency at different discharge condition is also deduced. It is found that at lower-energy (<50 μJ) discharges, the energy required to remove the unit volume of material, defined as the specific energy, is found to be much less than that at higher-energy discharges. Additionally, the ratio of the standard deviation to the measured microcrater size is found to be lower at lower discharge energy, indicating greater consistency in shape and size when the discharge occurs at lower energy. The fundamental erosion mechanism of material is discussed by considering melting and evaporation phenomena using theoretical modeling. The average efficiency of erosion, when estimated to be due primarily to melting or evaporation alone, is found to be up to an order of magnitude higher at lower-energy discharges than that at higher-energy discharges.     

Crack initiation in relation to the tool edge radius and cutting conditions in nanoscale cutting of silicon

In cutting of brittle materials, experimentally it was observed that there is a ductile–brittle transition when the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius of the zero rake angle. However, how the crack is initiated in the ductile–brittle mode transition as the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius has not been fully understood. In this study, the crack initiation in the ductile–brittle mode transition as the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius has been simulated using the Molecular Dynamics (MD) method on nanoscale cutting of monocrystalline silicon with a non-zero edge radius tool, from which, for the first time, a peak deformation zone in the chip formation zone has been found in the transition from ductile mode to brittle mode cutting. The results show that as the undeformed chip thickness is larger than the cutting edge radius, in the chip formation zone there is a peak deformation depth in association with the connecting point of tool edge arc and the rake face, and there is a crack initiation zone in the undeformed workpiece next to the peak deformation zone, in which the material is tensile stressed and the tensile stress is perpendicular to the direction from the connecting point to the peak. As the undeformed chip thickness is smaller than the cutting edge radius, there is no deformation peak in the chip formation zone, and thus there is no crack initiation zone formed in the undeformed workpiece. This finding explains well the ductile–brittle transition as the undeformed chip thickness increases from smaller to larger than the tool cutting edge radius.     

What can possibly go wrong? Anticipatory work in space operations

This paper explores how different forms of anticipatory work contribute to reliability in high-risk space operations. It is based on ethnographic field work, participant observation and interviews supplemented with video recordings from a control room responsible for operating a microgravity greenhouse at the International Space Station (ISS). Drawing on examples from different stages of a biological experiment on the ISS, we demonstrate how engineers, researchers and technicians work to anticipate and proactively mitigate possible problems. Space research is expensive and risky. The experiments are planned over the course of many years by a globally distributed network of organizations. Owing to the inaccessibility of the ISS, every trivial detail that could possibly cause a problem is subject to scrutiny. We discuss what we label anticipatory work: practices constituted of an entanglement of cognitive, social and technical elements involved in anticipating and proactively mitigating everything that might go wrong. We show how the nature of anticipatory work changes between planning and the operational phases of an experiment. In the planning phase, operators inscribe their anticipation into technology and procedures. In the operational phase, we show how troubleshooting involves the ability to look ahead in the evolving temporal trajectory of the ISS operations and to juggle pre-planned fixes along these trajectories. A key objective of this paper is to illustrate how anticipation is shared between humans and different forms of technology. Moreover, it illustrates the importance of including considerations of temporality in safety and reliability research.     

Objective evaluation of speech dysfluencies using wavelet packet transform with sample entropy

Dysfluency and stuttering are a break or interruption of normal speech such as repetition, prolongation, interjection of syllables, sounds, words or phrases and involuntary silent pauses or blocks in communication. Stuttering assessment through manual classification of speech dysfluencies is subjective, inconsistent, time consuming and prone to error. This paper proposes an objective evaluation of speech dysfluencies based on the wavelet packet transform with sample entropy features. Dysfluent speech signals are decomposed into six levels by using wavelet packet transform. Sample entropy (SampEn) features are extracted at every level of decomposition and they are used as features to characterize the speech dysfluencies (stuttered events). Three different classifiers such as k-nearest neighbor (kNN), linear discriminant analysis (LDA) based classifier and support vector machine (SVM) are used to investigate the performance of the sample entropy features for the classification of speech dysfluencies. 10-fold cross validation method is used for testing the reliability of the classifier results. The effect of different wavelet families on the classification performance is also performed. Experimental results demonstrate that the proposed features and classification algorithms give very promising classification accuracy of 96.67% with the standard deviation of 0.37 and also that the proposed method can be used to help speech language pathologist in classifying speech dysfluencies.     

Multiple responses analysis and modeling of Fenton process for treatment of high strength landfill leachate

Landfill leachate is one of the most recalcitrant wastes for biotreatment and can be considered a potential source of contamination to surface and groundwater ecosystems. In the present study, Fenton oxidation was employed for degradation of stabilized landfill leachate. Response surface methodology was applied to analyze, model and optimize the process parameters, i.e. pH and reaction time as well as the initial concentrations of hydrogen peroxide and ferrous ion. Analysis of variance showed that good coefficients of determination were obtained (R2 > 0.99), thus ensuring satisfactory agreement of the second-order regression model with the experimental data. The results indicated that, pH and its quadratic effects were the main factors influencing Fenton oxidation. Furthermore, antagonistic effects between pH and other variables were observed. The optimum H2O2 concentration, Fe(II) concentration, pH and reaction time were 0.033 mol/L, 0.011 mol/L, 3 and 145 min, respectively, with 58.3% COD, 79.0% color and 82.1% iron removals.     

New Hybrid Access Method for Femtocell through Adjusting QoS

The increasing number of mobile users raises issues about coverage extension in some areas such as rural zones, indoor or underground locations： one of suggestion solution to accommodate this growing of mobile user is femtocell. Femtocell have been attracting considerable attention in mobile communications, it is a small base station that install to improve the indoor coverage of a given cellular and to enhance user＇s capacity. Call admission control and resource allocation infemtocell＇s hybrid mode are an essential performance promotion issue. Developing methods for femtocell utilization is very comparative nowadays. The two major limitations of wireless communication are capacity and range. The main contribution of our paper is developing resource allocation scheme that can manage the femocell resources between subscriber （femtocell user） and non-subscriber （macrocell user in order to maximizing the system utilizations, we provide a mechanism that leads to serve more users by admitting more subscribers basing on adjusting QoS of the connected users.     

Buoyancy convection in a cavity with mutually orthogonal heated plates

Buoyancy driven convection in a square cavity induced by two mutually orthogonal arbitrarily placed heated thin plates is studied numerically under isothermal and isoflux boundary conditions. The flow is assumed to be two-dimensional. The coupled governing equations were solved by the finite difference method using the Alternating Direction Implicit technique and Successive Over Relaxation method. The steady state results are depicted in terms of streamline and isotherm plots. It is found that the resulting convection pattern is stronger for the isothermal boundary condition. A better overall heat transfer can be achieved by placing one of the plates far away from the center of the cavity for isothermal boundary condition and near the center of the cavity for isoflux boundary condition.     

Design and modelling of ultrasonic tomography for two-component high-acoustic impedance mixture

This paper describes the design and modelling of ultrasonic tomography for two-component high-acoustic impedance mixture such as liquid/gas and oil/gas flow which commonly found in chemical columns and industrial pipelines. The information obtained through this research has proven to be useful for further development of ultrasonic tomography. This includes acquiring and processing ultrasonic signals from the transducers to obtain the information of the spatial distributions of liquid and gas in an experimental column. Analysis on the transducers’ signals has been carried out to distinguish between the observation time and the Lamb waves. The information obtained from the observation time is useful for further development of the image reconstruction.     

A new approach to water quality modelling and environmental decision support systems

The concepts and technology of environmental decision support systems (EDSS) have developed considerably over recent decades, although core concepts such as flexibility and adaptability within a changing decision environment remain paramount. Much recent EDSS theory has focussed on model integration and re-use in decision support system (DSS) tools and for design and construction of ‘DSS generators’. Many current specific DSS have architectures, tools, models and operational characteristics that are either fixed or difficult to change in the face of changing management needs. This paper reports on development and deployment of an EDSS that encompasses a new approach to DSS tools, generators and specific DSS applications. The system, named E2, is built upon a conceptualisation of terrestrial and aquatic environmental systems that has resulted in a robust and flexible system architecture. The architecture provides a set of base classes to represent fundamental concepts, and which can be instantiated and combined to form DSS generators of varying complexity. A DSS generator is described within which system users are able to select and link models, data, analysis tools and reporting tools to create specific DSS for particular problems, and for which new models and tools can be created and, through software reflection (introspection), discovered to provide expanded capability where required. This system offers a new approach within which environmental systems can be described in the form of specific DSS at a scale and level of complexity suited to the problems and needs of decision makers.