MODIFICATION OF GEOMETRY AND TECHNOLOGY OF CYLINDRICAL WORMS

The objective of this research is to develop a new method of grinding process that can efficiently make concave profile of the worm thread smooth. The grinding is carried out using a wheel with curvature profile in the axial plane in the form of an arc of logarithmic spiral. The proposed method will provide maximum line of contact between the tool and the worm with minimum stress concentration at any point. The generating equation of the grinding tool profile and its arrangement with respect to the worm during thread grinding were determined.     

Water Resources Management in Saudi Arabia and Water Reuse

ABSRTACT

The potential for water reclamation and reuse in Saudi Arabia are assessed by considering relationships among the technical, social, economic, and environmental parameters. Generally, the planning process for water reuse has focused on specific technological processes, however water reuse should be analyzed as part of a total hydrologic system to ensure the efficient transfer of wastewater reuse technology

To bring relationships into better focus, the application is developed with reference to Saudi Arabia, which provides an excellent opportunity for practicing water reuse. In this region, a limited water supply is used to satisfy municipal, industrial, agricultural, recreational and other beneficial uses. The economic and social trends are toward continued industrial development and urbanization. In this setting, water recycling through reuse is becoming a more and more important means of expanding water supplies to meet the growing demands for water for virtually all social, economic and environmental uses

Saudi Arabia is an arid country with very limited water resources and about 10 million people. The country covers some 2.2 million km², four-fifths of the Arabian Peninsula. It is the largest country in the world without a river or a lake, and thus it represents the ultimate in its need to use the limited water supplies wisely.     

Adsorptive performance of penta-bismuth hepta-oxide nitrate, Bi?O?NO?, for removal of methyl orange dye

The adsorption of methyl orange dye from aqueous solution onto penta-bismuth hepta-oxide nitrate, Bi(5)O(7)NO(3), synthesized by precipitation method, was studied in a batch adsorption system. The effects of operation parameters such as adsorbent dose, initial dye concentration, pH and temperature were investigated. The adsorption equilibrium and mechanism of adsorption was evaluated by Langmuir and Freundlich isotherm and different kinetic models, respectively. The results indicate that adsorption is highly dependent on all operation parameters. At optimum conditions, the adsorption capacity was found to be 18.9 mg/g. The adsorption data fits well with the Langmuir isotherm model indicating monolayer coverage of adsorbate molecules on the surface of Bi(5)O(7)NO(3). The kinetic studies show that the adsorption process is a second-order kinetic reaction. Although intra-particle diffusion limits the rate of adsorption, the multi-linearity plot of intra-particle model shows the importance of both film and intra-particle diffusion as the rate-limiting steps of the dye removal. Thermodynamic parameters show that the adsorption process is endothermic, spontaneous and favourable at high temperature.     

Learning mixtures of point distribution models with the EM algorithm

This paper demonstrates how the EM algorithm can be used for learning and matching mixtures of point distribution models. We make two contributions. First, we show how shape-classes can be learned in an unsupervised manner. We present a fast procedure for training point distribution models using the EM algorithm. Rather than estimating the class means and covariance matrices needed to construct the PDM, the method iteratively refines the eigenvectors of the covariance matrix using a gradient ascent technique. Second, we show how recognition by alignment can be realised by fitting a mixture of linear shape deformations. We evaluate the method on the problem of learning the class-structure and recognising Arabic characters.     

Preparation of an exponentially rising optical pulse for efficient excitation of single atoms in free space

We report on a simple method to prepare optical pulses with exponentially rising envelope on the time scale of a few ns. The scheme is based on the exponential transfer function of a fast transistor, which generates an exponentially rising envelope that is transferred first on a radio frequency carrier, and then on a coherent cw laser beam with an electro-optical phase modulator. The temporally shaped sideband is then extracted with an optical resonator and can be used to efficiently excite a single (87)Rb atom.     

Discretized Markov chain in damage assessment using Rainflow cycle with effects of mean stress on an automobile crankshaft

We studied the effect of mean stress correction factor using the Rainflow counting technique to assess the fatigue damage of an automobile crankshaft under service loading by considering the stochastic process of the Markov chain. The failure of the crankshaft will cause serious damage to the engine and also to other connecting subcomponents. The service loading is computationally generated from the Discrete Markov chain model and the fatigue cycle is counted using the Rainflow counting technique with the consideration of the local minima and maxima load. To quantify the fatigue damage, the strain-life curve using the fatigue mean stresses was used to model the fatigue failure of the material used in for the crankshaft at N _f = 10 ⁶ . The fatigue mean stresses were used to estimate the effects of the mean stress on the fatigue strength of the component under service loading condition. Statistical verification with the boundary condition of the 90% confidence level was performed to observe the difference between the stochastic algorithms when compared towards the fatigue life behavior of the ductile cast iron material. We concluded that for the practical application, the proposed stochastic model provides a highly accurate assessment of fatigue damage prediction for improving the safety and controlling the risk factors in terms of structural health monitoring.     

A non-contact method for part-based process performance monitoring in end milling operations

Surface response to excitation (SuRE) method was originally developed for structural health monitoring (SHM) applications. SuRE was used to evaluate the performance of completed milling operations. The method generates surface waves on the plate and studies the spectrum changes at selected points to detect defects and change of compressive forces. In this study, the length, depth, and width of a slot were changed step by step. The surface of the aluminum plate was excited in the 20–400 kHz range with a piezoelectric element. A laser scanning vibrometer was used to monitor the vibrations at the predetermined grid points after the dimensions of the slot were changed methodically. The frequency spectrums of measured vibrations were calculated by using the Fast Fourier Transformation (FFT). The sums of the squares of the differences (SSD) of the spectrums were calculated to evaluate the change of the spectrums. The SuRE method was able to determine if the dimensions were changed in each case at all the selected points. The scanning laser vibrometer is not feasible to be used at the shop floor. However, the study demonstrated that a piezoelectric element attached to any of the grid points would be able to evaluate the completed machining process.     

Predicting surface quality of γ-TiAl produced by additive manufacturing process using response surface method

Electron beam melting (EBM) has been found to be a promising technology for producing complex shaped parts from gamma titanium aluminide alloys (γ-TiAl). The parts produced by this process are projected to have dimensions very close to the desired final shapes. However, the surface roughness of the parts produced by EBM is excessively rough. In many applications, it is necessary to improve the quality of manufactured parts using a convenient post process. This paper determines process parameters of end milling when it is used as a post process for the parts produced by EBM. Design of experiments has been used to study the effect of the selected input parameters of end milling (spindle speed, feed rate, depth of cut and coolant type) on the surface roughness of γ-TiAl parts. Response surface methodology is used to develop a predictive model for surface roughness. Effects of the selected milling process are investigated. This paper also optimizes the selected process parameters to minimize the value of the obtained surface roughness.