Evaluation of intermodel agreement using ISO 13655 M0, M1, and M2 measurement modes in commercial spectrophotometers

Spectrophotometers are routinely used for color measurement and color management in many commercial printing and proofing workflows. In the case of media containing optical brightening agents, ultraviolet (UV)‐induced fluorescence has led to poor levels of agreement between models from different manufacturers, and different models from the same manufacturer. A relevant standard, ISO 13655, has been revised and now clearly defines measurement modes and conditions for the UV component in spectrophotometers. ISO 13655:2009—Graphic Technology—Spectral Measurement and Colorimetric Computation for Graphic Arts Images now defines four measurement modes: M0, M1, M2, and M3. The intermodel difference between 10 commercially available spectrophotometers is evaluated for different substrate types in measurement modes (M0, M1, and M2) as allowed by each instrument. In particular, the authors compare devices using M0 legacy mode versus newer instruments that are compliant with the new M1 and M2 (UV‐included and UV‐excluded) measurement modes. A finding with significant practical applications is that there is greatly improved intermodel agreement between the new generation of ISO 13655‐compliant instruments in M1 (D50) mode when compared with the previous generation of hand‐held spectrophotometers. © 2016 Wiley Periodicals, Inc. Col Res Appl, 42, 27–37, 2017     

Dynamic Embrittlement in Cu-Cr-Zr-Ti Alloy: Evidence of Intergranular Segregation of Sulphur

In the present investigation, Cu-0.6Cr-0.005Zr-0.0045Ti alloy was subjected to different heat treatment and thermomechanical treatment (TMT) to simulate the conditions experienced during brazing and forming, respectively. Grain coarsening was observed in the samples subjected to heat treatment, and grain refinement was observed in the samples subjected to TMT. Tensile tests conducted with these samples at room temperature and 600 °C have shown that Cu-Cr-Zr-Ti alloy was susceptible to dynamic embrittlement (DE). However, the observation was limited to coarse-grained samples (280-350 μm) at 600 °C. On the other hand, the fine-grained samples (20-40 μm) showed good ductility. Electron microscopy studies conducted on the tensile-tested specimens prone to DE indicated the presence of sulfur on the fractured surface and intergranular segregation of sulfur. Therefore, it can be inferred from the results that DE due to sulfur can occur in Cu-Cr-Zr-Ti alloy at elevated temperature for coarse-grained samples.     

Adsorptive recovery of water soluble essential oil components

Many essential oils are produced by the process of steam distillation. During this process valuable oxygenated components of the oil which have relatively higher solubility in water are preferentially lost in the distillate water. This loss is directly reflected in a lower yield and poor quality of the oil. Adsorption is extensively used for recovery of such valuable organics from dilute aqueous streams. This paper describes a preliminary study on the feasibility of adsorptive recovery. The following synthetic polymeric adsorbents were used in this work: Amberlite XAD-2, XAD-4 and XAD-7. Equilibrium and column exahaustion studies were carried out for the adsorption of phenyl ethyl alcohol (PEA), linalool (LL) and eugenol (EG) and also of mixtures of PEA and LL, and EG and LL from dilute aqueous solutions. The results indicate that XAD-4 is a relatively better adsorbent for all the three solutes studied.     

DESIGN AND OPERATION OF A FLUIDIZED BED REACTOR MINI-PILOT PLANT FOR GASOLINE SYNTHESIS

MethanoI-to-Gasoline (MTG) process is an excellent process which produces aromatics-rich gasoline from methanol over the ZSM-5 catalyst. The methanol feed in this process is usually derived from coal or natural gas based syngas.

The dehydration of methanol to dimethyl ether (DME) is a key intermediate step in converting methanol into gasoline. The substitution of syngas-to-methanol step in the MTG process by the direct one stage conversion of syngas-to-DME is thus a very attractive option. This substitution is particularly justified on the basis of the fact that DME results in virtually identical hydrocarbon product distribution as methanol.

Synthesis of gasoline via this direct DME route has several significant advantages over the MTG process, in the areas of product yield, selectivity, overall syngas conversion, exothermicity, and reactor size. The conceptual advantages of this DME-to-gasoline (DTG) process can be demonstrated in a laboratory scale fluidized bed gasoline synthesis unit.

This paper discusses the design philosophy of the fluidized bed reactor unit and its peripherals. The fabrication, assembly, and operation of the unit have also been discussed in detail.     

Pattern identification of different human joints for different human walking styles using inertial measurement unit (IMU) sensor

Artificial Intelligence Review - A bipedal walking robot is a kind of humanoid robot. It is suppose to mimics human behavior and designed to perform human specific tasks. Currently, humanoid robots...     

Knowledge Compilation Meets Database Theory: Compiling Queries to Decision Diagrams

The goal of Knowledge Compilation is to represent a Boolean expression in a format in which it can answer a range of “online-queries” in PTIME. The online-query of main interest to us is model counting, because of its application to query evaluation on probabilistic databases, but other online-queries can be supported as well such as testing for equivalence, testing for implication, etc. In this paper we study the following problem: given a database query q, decide whether its lineage can be compiled efficiently into a given target language. We consider four target languages, of strictly increasing expressive power (when the size of compilation is restricted to be polynomial in the data size): read-once Boolean formulae, OBDD, FBDD and d-DNNF. For each target, we study the class of database queries that admit polynomial size representation: these queries can also be evaluated in PTIME over probabilistic databases. When queries are restricted to conjunctive queries without self-joins, it was known that these four classes collapse to the class of hierarchical queries, which is also the class of PTIME queries over probabilistic databases. Our main result in this paper is that, in the case of Unions of Conjunctive Queries (UCQ), these classes form a strict hierarchy. Thus, unlike conjunctive queries without self-joins, the expressive power of UCQ differs considerably with respect to these target compilation languages. Moreover, we give a complete characterization of the first two target languages, based on the query’s syntax.     

Prospects of low temperature co-fired ceramic (LTCC) based microfluidic systems for point-of-care biosensing and environmental sensing

Low temperature co-fired ceramic (LTCC) based microfluidic devices are being developed for point-of-care biomedical and environmental sensing to enable personalized health care. This article reviews the prospects of LTCC technology for microfluidic device development and its advantages and limitations in processing capabilities compared to silicon, glass and polymer processing. The current state of the art in LTCC-based processing techniques for fabrication of microfluidic components such as microchannels, chambers, microelectrodes and valves is presented. LTCC-based biosensing applications are discussed under the classification of (a) microreactors, (b) whole cell-based and (c) protein biosensors. Biocompatibility of LTCC pertaining to the development of biosensors and whole cell sensors is also discussed. Other significant applications of LTCC microfluidic systems for detection of environmental contaminants and toxins are also presented. Technological constraints and advantages of LTCC-based microfluidic system are elucidated in the conclusion. The LTCC-based microfluidic devices provide a viable platform for the development of point-of-care diagnostic systems for biosensing and environmental sensing applications.     

High energy resolution five-crystal spectrometer for high quality fluorescence and absorption measurements on an x-ray absorption spectroscopy beamline

Fluorescence detection is classically achieved with a solid state detector (SSD) on x-ray absorption spectroscopy (XAS) beamlines. This kind of detection however presents some limitations related to the limited energy resolution and saturation. Crystal analyzer spectrometers (CAS) based on a Johann-type geometry have been developed to overcome these limitations. We have tested and installed such a system on the BM30B/CRG-FAME XAS beamline at the ESRF dedicated to the structural investigation of very dilute systems in environmental, material and biological sciences. The spectrometer has been designed to be a mobile device for easy integration in multi-purpose hard x-ray synchrotron beamlines or even with a laboratory x-ray source. The CAS allows to collect x-ray photons from a large solid angle with five spherically bent crystals. It will cover a large energy range allowing to probe fluorescence lines characteristic of all the elements from Ca (Z = 20) to U (Z = 92). It provides an energy resolution of 1-2 eV. XAS spectroscopy is the main application of this device even if other spectroscopic techniques (RIXS, XES, XRS, etc.) can be also achieved with it. The performances of the CAS are illustrated by two experiments that are difficult or impossible to perform with SSD and the complementarity of the CAS vs SSD detectors is discussed.     

Cracking of Al–Zn–Mg Aluminum Alloy Nozzle Weld of Propellant Storage Tank: A Metallurgical Investigation

Afnor 7020 (Al–4.5Zn–1.5Mg) is an aluminum alloy used in the fabrication of propellant tanks for satellite launch vehicles. The cylindrical portion of the tank (6 m length and 2.1 m diameter) is fabricated by TIG welding of 4.5 mm-thick sheets, while end domes at both the ends are fabricated by welding petals. Shrink fit nozzles; machined from forgings in T652 condition, provide nozzle openings for liquid conduit. One such tank developed crack at nozzle weld region during storage, 5 years after construction. The in-depth metallurgical analysis revealed that the crack developed due to stress corrosion cracking which was promoted by the formation of a liquated region during the welding operations.